Yamaha WF192 Einrichtungshandbuch
1
PCI SOUND CARD
Yamaha WAVEFORCE WF192XG Installation Wizard License Agreement
Yamaha Corporation (Yamaha) permits you use the Yamaha WAVEFORCE WF192XG Installation Wizard
(Software) conditioned on your acceptance of this agreement.
Use of this Software will be taken to mean acceptance of this agreement, so please read the following terms
carefully before you use the Software.
1 Copyright and permission for use
Yamaha grants you as an individual the right to use the Software on only one computer at any single time. The
ownership of the disk on which the Software is recorded belongs to you, but the ownership and copyright of the Program
itself belongs to Yamaha.
2 Prohibitions and restrictions
You may not reverse-compile, disassemble, reverse-engineer, or use any other method to convert the Software into a
human-readable form, nor may you allow another person to do so. The Software may not be duplicated, corrected,
modified, lent, leased, sold, distributed, licensed or disposed of in any other way in part or in whole. The creation of
derivative works based on the content of the Software is also prohibited. The Software may not be transmitted over a
network to another computer without written authorization from Yamaha. Your rights regarding the Software may be
transferred to a third party only if this is done for non-commercial purposes and if the Software and all associated
documentation including this agreement are included, and if the third party accepts this agreement.
3 Limitations of Liability
The Software was developed at, and is copyrighted by, Yamaha. The Software is offered “AS IS” and Yamaha makes
no warranty as to its use or performance.
YAMAHAAND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY
OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION.YAMAHA AND ITS SUPPLIERS MAKE NO
WARRANTIES, EXPRESS OR IMPLIED, AS TO NONINFRINGEMENT OF THIRD PARTY RIGHTS,
MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE.IN NO EVENT WILL YAMAHA OR ITS
SUPPLIERS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING
ANY LOST PROFITS OR LOST SAVINGS, EVEN IF AN YAMAHA REPRESENTATIVE HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY.
Copyright © 1998 YAMAHA CORPORATION
All Rights Reserved
The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the
screens which appear on your computer.
WF192e.qx 5/21/98 9:16 PM Page 1
Thank you for buying Yamaha WAVEFORCE (WF192XG) package. This product is designed to enhance
and integrate your DOS/Windows computer’s sound and music capabilities in combination of the high-quality
sound hardware and a wide variety of application software. The WAVEFORCE soundcard can provide audio
signal mixing feature plus its onboard XG wavetable synthesizer (with S-VAphysical modeling voices),
maintaining downward compatibility to Yamaha OPL3 FM audio, SoundBlaster Pro 16-bit audio, MPU401
UARTMIDI interface mode and joystick or game pad connecting features. You can soon and fully enjoy the
features of this soundcard with several kinds of applications included in the package. Before using your new
soundcard and bundled software, please read this manual thoroughly. Also, keep this manual in a safe
location for future reference.
nYamaha OPL3 FM audio is not available under Windows 95. It is available only in MS-DOS real mode, DOS box (Windows DOS
emulation) and Windows NT.
User registration is important to prove that you are a legal user of the product and have a right to receive a
technical support and other useful information from Yamaha. This registration should be done online via
Internet at Yamaha’s WAVEFORCE web site (http://www.waveforce.com) using a serial number labeled on
the soundcard so that you should write down the number before installation of the card.
nIf the user registration card is contained in your WAVEFORCE package, the registration can be done by filling in the card and
posting it.
A serial number
on the sticker
These two lines are both necessary for user
registration. Write them down BEFORE installing
the soundcard.
User Registration
Preface
2
WF192e.qx 5/21/98 9:16 PM Page 2
User support service is available if your user registration is completed.
Registered users can receive the following services:
• Driver software update
• Useful information
• Technical support
For details on the technical support service, see Yamaha’s WAVEFORCE web site
(http://www.waveforce.com).
Installation of the card must be done in the following procedure:
nNotice that installation of the card requires an empty PCI card slot in your computer. If you use a PCI slot that has been occupied
with another card, first remove the driver software for that card, turn off the computer to remove the card, and then reboot the
computer to forcibly recognize that the old card is not there. After completion of this process, turn off the computer and start the
following installation process for the new card.
1Referring to the manual that came with your computer, as explained in “Consulting on Documentation” of
the paper document (Getting Started) in the package, prepare for installation of the card inside your
computer.
2Open the antistatic bag and take out the card while holding it by its edge to avoid touching metal PCI
connectors and electronic components on the card.
3Locate a sticker put on the card that is printed with a card’s serial number. Make a note of the number
for online registration, as explained in “User Registration” above.
4Make sure the location of internal connectors on the card that attach with appropriate connectors from the
internal devices of the computer (audio lines from CD-ROM drive, Modem card, video card). Each
location of the card’s connector is as follows:
TAD
CDAUDIO (CD In)
VIDEO
CDAUDIO
AUX
PCPCI
TAD (Telephone Answering Device (TAD) In/Out)
VIDEO (Video In)
AUX (AUX In)
Game Port & MIDI
Line In
Mono Microphone In
Line Out
Speaker Out PCPCI (PC/PCI)
External connectors Internal connectors
Installation of the SoundCard
User Support Service
3
WF192e.qx 5/21/98 9:16 PM Page 3
5Making necessary internal connections between the card and devices, attach the card to the PCI card slot
in the computer. Make sure that the card is firmly seated in the appropriate direction. Do not force on the
card if you feel it does not fit to the slot. Reconfirm first that you are attempting with a correct slot referring
to the manual that came with your computer, and then retry.
6After internal connections, make external connections with your peripheral devices (speakers,
microphone, MIDI keyboard, etc.).
4
Tip
Line In (Stereo mini-jack)
Left channel
Ring Right channel
Sleeve Ground
Tip
Mono Microphone In (Stereo mini-jack)
Mic In
Ring Power supply
Sleeve Ground
Tip
Line Out (Stereo mini-jack)
Left channel
Ring Right channel
Sleeve Ground
Tip
Speaker Out (Stereo mini-jack)
Left channel
Ring Right channel
Sleeve Ground
1
CDAUDIO
CD Ground
2Left channel
3CD Ground
4Right channel
1
TAD Phone In
2Ground
3Ground
4Mono Out
1
VIDEO Left channel
2Ground
3Ground
4Right channel
1
AUX Left channel
2Ground
3Ground
4Right channel
1
PCPCI PC/PCI Grant #
2Ground
3
4PC/PCI Request #
5Ground
6Serialized IRQ #
1
Game Port & MIDI
+5V
2 Joystick A Button 1
Joystick A X-coordinate
GND
GND
Joystick A Y-coordinate
Joystick A Button 2
+5V
+5V
Joystick B Button 1
Joystick B X-coordinate
MIDI Out
Joystick B Y-coordinate
Joystick B Button 2
MIDI In
3
4
5
6
7
8
9
10
11
12
13
14
15
Connect this socket to your mother
board if you wish to reproduce the
sound from a DOS game in MS-DOS
real mode.
WF192e.qx 5/21/98 9:16 PM Page 4
The soundcard will not work until you install appropriate driver software (Yamaha DS-XG driver) and reboot
the computer. Follow the instructions below to install the appropriate DS-XG driver.
nDifferent driver software should be installed to a different version of Windows 95. Say, Windows 95 OEM System Release 2 (aka.,
OSR2) requires driver software other than for pre-OSR2 version of Windows 95.
Installing the DS-XG Driver Software forWindows 95 (4.00.950 or 4.00.950a)
The WAVEFORCE soundcard is a Windows 95 Plug-and-Play device. Once the soundcard is installed and
your computer is rebooted, Windows 95 will automatically detect the device and start the Install Wizard.
The New Hardware Found window will appear as shown below.
1Insert the WF192XG Installation Wizard CD-ROM in your CD drive, select “Driver from disk provided by
hardware manufacture” and click the [OK] button to continue.
2Windows95 asks you to insert a floppy disk. But the drivers are supplied by CD-ROM, click the [Browse]
button.
3Select CD-ROM drive and the folder “drivers\win95\English”. Then click the [OK] button.
nThe folder “drivers\win95\Italian” and “drivers\win95\Spanish” are also available instead of “\English”.
This completes the installation process of the DS-XG Device Manager. Consecutively, install the device
drivers for PCI Audio Codec, Legacy Sound System and Legacy Game Port.
Installation of the Driver Software
5
WF192e.qx 5/21/98 9:16 PM Page 5
Installing the Device Drivers for PCI Audio Codec, Legacy Sound System and Legacy Game Port
1Once the DS-XG Device Manager installation is complete, the New Hardware Found window will appear
as shown below. Insert the WF192XG Installation Wizard CD-ROM in your CD drive now. Select “Driver
from disk provided by hardware manufacturer” and click the [OK] button to continue.
2Windows95 asks you to insert a floppy disk. But the drivers are supplied by CD-ROM, click the [Browse]
button.
3Select CD-ROM drive and the folder “drivers\win95\English”. Then click the [OK] button.
nThe folder “drivers\win95\Italian” and “drivers\win95\Spanish” are also available instead of “\English”.
4If you have never installed the joystick driver, a message below appears. Insert Windows95 CD-ROM or
disk, click the [OK] button and install the joystick driver.
This completes all the installation procedures.
6
WF192e.qx 5/21/98 9:16 PM Page 6
Verifying the DS-XG Driver Installation
To see if the DS-XG device driver has been installed successfully, complete the following steps:
1Click the [Start] button on the Windows taskbar.
2Highlight [Settings] and click [Control Panel].
3The Control Panel now appears. Double-click the “System” icon.
4The System Properties window now appears. Click on the “Device Manager” tab as shown below. The
Device Manager page now appears as shown.
5In the hierarchical directory structure illustrated above, double-click on “Sound, video and game
controllers” and verify that “YAMAHA DS-XG Device Manager” is listed as shown.
6Double-click on “YAMAHA DS-XG Devices” and verify that the following devices are listed as illustrated
above.
•YAMAHA DS-XG GamePort
•YAMAHA DS-XG Legacy Sound System
•YAMAHA DS-XG PCI Audio CODEC
nThere may be an exclamation mark (!) shown next to one of above device names when you have another sound device installed,
in addition to the WAVEFORCE card. The exclamation mark shows that the WAVEFORCE card conflicts the existing sound
device. To solve this problem, you should take either of the following:
• Remove the driver software of the conflicting device.
• Manually adjust the resource configuration (IRQ or so on) of the conflicting device.
nIf the DS-XG device driver has not been installed successfully, uninstall it (→P.28) and retry the installation.
7
WF192e.qx 5/21/98 9:16 PM Page 7
Installing the DS-XG Driver Software for Windows 95 OSR2 (4.00.950b)
The WAVEFORCE soundcard is a Windows 95 Plug-and-Play device. Once the soundcard is installed and
your computer is rebooted, Windows 95 will automatically detect the device and start the Install Wizard.
The Updated Device Driver Wizard window will appear as shown below.
1Insert the WF192XG Installation Wizard CD-ROM in your CD drive and click the [Next] button to continue.
2The information displayed in Update Device Driver Wizard window will now change as shown below. Click
the [Other Locations] button to continue.
3Click the [Browse] button, select CD-ROM drive and the folder “Drivers\Win95\English”. Then click the
[OK] button.
8
WF192e.qx 5/21/98 9:16 PM Page 8
4The information displayed in the Updated Device Driver Wizard window will now change as shown below.
Verify that “YAMAHA DS-XG Device Manager” is displayed as shown and click the [Finish] button.
5The Insert Disk window will now appear as shown below and you will be prompted to insert a disk. Simply
click the [OK] button to continue.
6Windows 95 will now copy the necessary files to your computer. If the Copying Files window appears as
shown below, then edit the path box with the following values:
D:\drivers\win95\English
nIf your CD drive is other than “D”, input the actual drive in the path box. (e.g. “E:\drivers\win95\English” “F:\drivers\win95\English”)
nThe folder “drivers\win95\Italian” and “drivers\win95\Spanish” are also available instead of “\English”.
Click the [OK] button to continue with the installation.
This completes the installation process of the DS-XG Device Manager.
Consecutively, install the device drivers for PCIAudio Codec, Legacy Sound System and Legacy Game Port.
9
WF192e.qx 5/21/98 9:16 PM Page 9
Installing the Device Drivers for PCI Audio Codec, Legacy Sound System and Legacy Game Port
1Once the DS-XG Device Manager installation is complete, the Update Device Driver Wizard window will
appear as shown below. Insert the WF192XG Installation Wizard CD-ROM in your CD drive and click the
[Next] button to continue.
2The information displayed in the Updated Device Driver Wizard window will now change as shown below.
Verify that “YAMAHA DS-XG PCI Audio CODEC” is displayed as shown and click the [Finish] button.
3If you have never installed the joystick driver, a message below appears. Insert Windows95 CD-ROM or
disk, click the [OK] button and install the joystick driver.
This completes all the installation procedures.
10
WF192e.qx 5/21/98 9:16 PM Page 10
Andere Handbücher für WF192
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Yamaha Soundkarte Handbücher
Yamaha
Yamaha mLAN MY16 Bedienungsanleitung
Yamaha
Yamaha HY128-MD Bedienungsanleitung
Yamaha
Yamaha LMY4-MLF Bedienungsanleitung
Yamaha
Yamaha WF192 Bedienungsanleitung
Yamaha
Yamaha MY8-SDI-D Bedienungsanleitung
Yamaha
Yamaha AX16-AT Bedienungsanleitung
Yamaha
Yamaha HY256-TL-SMF Bedienungsanleitung
Yamaha
Yamaha EtherSound MY16-ES64 Bedienungsanleitung
Yamaha
Yamaha GS1 Bedienungsanleitung
Yamaha
Yamaha Dante Accelerator Montageanleitung
Yamaha
Yamaha MY16-MD64 Montageanleitung
Yamaha
Yamaha SW60XG Bedienungsanleitung
Yamaha
Yamaha YMF744 Bedienungsanleitung
Yamaha
Yamaha HY144-D-SRC Bedienungsanleitung
Yamaha
Yamaha PLG150-PF Bedienungsanleitung
Yamaha
Yamaha HY128-MD Bedienungsanleitung
Yamaha
Yamaha HY256-TL Bedienungsanleitung
Yamaha
Yamaha HY256-TL-SMF Bedienungsanleitung
Yamaha
Yamaha PLG150-DR Kurzanleitung
Yamaha
Yamaha EtherSound MY16-ES64 Montageanleitung
Beliebte Soundkarte Handbücher anderer Marken
PCchips
PCchips CMI8330 Bedienungsanleitung
Creative
Creative Sound BlasterX G5 SB1700 Bedienungsanleitung
IBM
IBM Music Feature Card Bedienungsanleitung
Diamond Multimedia
Diamond Multimedia Xtreme Sound Bedienungsanleitung
Digigram
Digigram VX222v2 Bedienungsanleitung
MARIAN
MARIAN SERAPH M2 Bedienungsanleitung
