YASKAWA VIPA System 200V Bedienungsanleitung

VIPA System 200V

FM | Manual

HB97E_FM | RE_250-1BS00 | Rev. 14/44

October 2014

This document contains proprietary information of VIPA and is not to be disclosed or used except in accordance with applicable

agreements.

This material is protected by the copyright laws. It may not be reproduced, distributed, or altered in any fashion by any entity (either

internal or external to VIPA), except in accordance with applicable agreements, contracts or licensing, without the express written

consent of VIPA and the business management owner of the material.

For permission to reproduce or distribute, please contact:

VIPA, Gesellschaft für Visualisierung und Prozessautomatisierung mbH

Ohmstraße 4, D-91074 Herzogenaurach, Germany

Tel.: +49 (91 32) 744 -0

Fax.: +49 9132 744 1864

EMail: inf[email protected]

http://www.vipa.com

Note

Every effort has been made to ensure that the information contained in this document was complete and accurate at the time of

publishing. Nevertheless, the authors retain the right to modify the information. This customer document describes all the hardware

units and functions known at the present time. Descriptions may be included for units which are not present at the customer site. The

exact scope of delivery is described in the respective purchase contract.

CE Conformity Declaration

Hereby, VIPA GmbH declares that the products and systems are in compliance with the essential requirements and other relevant

provisions.

Conformity is indicated by the CE marking affixed to the product.

Conformity Information

For more information regarding CE marking and Declaration of Conformity (DoC), please contact your local VIPA customer service

organization.

Trademarks

VIPA, SLIO, System 100V, System 200V, System 300V, System 300S, System 400V, System 500S and Commander Compact are

registered trademarks of VIPA Gesellschaft für Visualisierung und Prozessautomatisierung mbH.

SPEED7 is a registered trademark of profichip GmbH.

SIMATIC, STEP, SINEC, TIA Portal, S7-300 and S7-400 are registered trademarks of Siemens AG.

Microsoft und Windows are registered trademarks of Microsoft Inc., USA.

Portable Document Format (PDF) and Postscript are registered trademarks of Adobe Systems, Inc.

All other trademarks, logos and service or product marks specified herein are owned by their respective companies.

Information product support

Contact your local VIPA Customer Service Organization representative if you wish to report errors or questions regarding the contents

of this document. If you are unable to locate a customer service center, contact VIPA as follows:

VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany

Telefax:+49 9132 744 1204

EMail: documentation@vipa.de

Technical support

Contact your local VIPA Customer Service Organization representative if you encounter problems with the product or have questions

regarding the product. If you are unable to locate a customer service center, contact VIPA as follows:

VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany

Telephone: +49 9132 744 1150 (Hotline)

EMail: s[email protected]

Manual VIPA System 200V Contents

HB97E - FM - RE_250-1BS00 - Rev. 14/44 i

Contents

About this manual....................................................................................1

Safety information....................................................................................2

Chapter 1 Basics and Assembly .....................................................1-1

Safety Information for Users.................................................................1-2

System conception...............................................................................1-3

Dimensions ..........................................................................................1-5

Installation............................................................................................1-7

Demounting and module exchange....................................................1-11

Wiring.................................................................................................1-12

Installation guidelines.........................................................................1-14

General data ......................................................................................1-17

Chapter 2 Hardware description .....................................................2-1

Properties.............................................................................................2-2

Structure ..............................................................................................2-3

Technical data......................................................................................2-5

Chapter 3 Deployment .....................................................................3-1

Functionality.........................................................................................3-2

Configuration........................................................................................3-4

Contents Manual VIPA System 200V

ii HB97E - FM - RE_250-1BS00 - Rev. 14/44

Manual VIPA System 200V About this manual

HB97E - FM - RE_250-1BS00 - Rev. 14/44 1

About this manual

This manual describes the System 200V SSI module FM 250S from VIPA.

Here you may find every information for commissioning and operation.

Chapter 1: Basics and Assembly

The focus of this chapter is on the introduction of the VIPA System 200V.

Here you will find the information required to assemble and wire a

controller system consisting of System 200V components.

Besides the dimensions the general technical data of System 200V will be

found.

Chapter 2: Hardware description

Here the hardware components of the FM 250-1BS00 are described.

The technical data are at the end of the chapter.

Chapter 3: Deployment

This chapter contains every information on the deployment and the

configuration of the SSI module FM 250S.

Overview

About this manual Manual VIPA System 200V

2 HB97E - FM - RE_250-1BS00 - Rev. 14/44

This manual describes the System 200V SSI module FM 250S from VIPA.

It contains a description of the construction, project implementation and

usage.

This manual is part of the documentation package with order number

HB97E_FM and relevant for:

Product Order number as of state:

FM 250S VIPA 250-1BS00 02

The manual is targeted at users who have a background in automation

technology.

The manual consists of chapters. Every chapter provides a self-contained

description of a specific topic.

The following guides are available in the manual:

• an overall table of contents at the beginning of the manual

• an overview of the topics for every chapter

The manual is available in:

• printed form, on paper

• in electronic form as PDF-file (Adobe Acrobat Reader)

Important passages in the text are highlighted by following icons and

headings:

Danger!

Immediate or likely danger.

Personal injury is possible.

Attention!

Damages to property is likely if these warnings are not heeded.

Note!

Supplementary information and useful tips.

Objective and

contents

Target audience

Structure of the

manual

Guide to the

document

Availability

Icons

Headings

Manual VIPA System 200V Safety information

HB97E - FM - RE_250-1BS00 - Rev. 14/44 3

Safety information

The FM 250S is constructed and produced for:

• all VIPA System 200V components

• communication and process control

• general control and automation applications

• industrial applications

• operation within the environmental conditions specified in the technical

data

• installation into a cubicle

Danger!

This device is not certified for applications in

• in explosive environments (EX-zone)

The manual must be available to all personnel in the

• project design department

• installation department

• commissioning

• operation

The following conditions must be met before using or commissioning

the components described in this manual:

• Hardware modifications to the process control system should only be

carried out when the system has been disconnected from power!

• Installation and hardware modification only by properly trained

personnel.

• The national rules and regulations of the respective country must be

satisfied (installation, safety, EMC ...)

National rules and regulations apply to the disposal of the unit!

Applications

conforming with

specifications

Documentation

Disposal

Safety information Manual VIPA System 200V

4 HB97E - FM - RE_250-1BS00 - Rev. 14/44

Manual VIPA System 200V Chapter 1 Basics and Assembly

HB97E - FM - RE_250-1BS00 - Rev. 14/44 1-1

Chapter 1 Basics and Assembly

The focus of this chapter is on the introduction of the VIPA System 200V.

Here you will find the information required to assemble and wire a controller

system consisting of System 200V components.

Besides the dimensions the general technical data of System 200V will be

found.

Topic Page