YASKAWA S-II Series Bedienungsanleitung

MANUAL NO. TOB-C718-6C

形式 JUSP-NS300, JUSP-NS300-E

DeviceNet アプリケーションモジュール

Σ-IIシリーズ

ACサーボドライブ

取扱説明書

製品を安全にお使い頂くために，本書を必ずお読みください。

また，本書をお手元に保管していただくとともに，最終的に本製品をご使用になる

ユーザー様のお手元に確実に届けられるよう，お取り計らい願います。

Type JUSP-NS300, JUSP-NS300-E

DeviceNet Application Module

Σ-II Series

AC Servo Drives

INSTRUCTIONS

To properly use the product, read this manual thoroughly and retain

for easy reference, inspection, and maintenance. Ensure the end user

receives this manual.

COSMOS以外（A5）（和英併記）新CI

or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording,

or otherwise, without the prior written permission of Yaskawa. No patent liability is assumed

with respect to the use of the information contained herein. Moreover, because Yaskawa is

constantly striving to improve its high-quality products, the information contained in this

manual is subject to change without notice. Every precaution has been taken in the preparation

of this manual. Nevertheless, Yaskawa assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained

in this publication.

iii

INTRODUCTION

■Manual Contents

This manual consists of Japanese Version and English Version.

• Japanese Version: Described on pages J-1 to J-31.

• English Version: Described on pages E-1 to E-30.

Use the Japanese Version or English Version as needed.

■User Instructions

Use these instructions for the following jobs:

• Checking Σ-II Series SERVOPACK on delivery

• Installing Σ-II Series SERVOPACK

• Wiring Σ-II Series SERVOPACK

• Operating Σ-II Series SERVOPACK

• Inspecting and maintenance of Σ-II Series SERVOPACK

E-1

INSTRUCTIONS

Σ-II SERIES SGDH

DeviceNet APPLICATION MODULE

SYMBOLS FOR SAFE OPERATION - - - - - - - - - - - - - - - - - - - - - - - E-4

NOTES FOR SAFE OPERATION - - - - - - - - - - - - - - - - - - - - - - - - - E-4

1 PARTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-8

2 CHECKING ON DELIVERY - - - - - - - - - - - - - - - - - - - - - - - E-9

2.1 Checking Items - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-9

2.2 Appearance and Nameplate - - - - - - - - - - - - - - - - - - - - - - - E-9

2.3 Type Designation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-10

2.4 Mounting NS300 Module - - - - - - - - - - - - - - - - - - - - - - - - E-10

3 INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-13

3.1 Storage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-13

3.2 Installation Sites - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-13

3.3 Orientation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-14

3.4 Installation Precautions - - - - - - - - - - - - - - - - - - - - - - - - - E-14

4 WIRING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-16

4.1 DeviceNet Connection Example - - - - - - - - - - - - - - - - - - - E-17

4.2 DeviceNet Communications Connection Example - - - - - - E-17

4.3 DeviceNet Communications Connectors (CN6) - - - - - - - - E-20

4.4 Precautions for Wiring DeviceNet Cables - - - - - - - - - - - - E-20

4.5 Grounding - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-24

5 EDS FILE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-25

E-2

6 OPERATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-25

6.1 Precautions at Test Run - - - - - - - - - - - - - - - - - - - - - - - - - E-25

6.2 Precautions at Operation - - - - - - - - - - - - - - - - - - - - - - - - E-26

7 INSPECTION AND MAINTENANCE - - - - - - - - - - - - - - - - E-27

8 MEASURES TO SATISFY THE EMC DIRECTIVE - - - - - - E-28

8.1 DeviceNet Communication Cable - - - - - - - - - - - - - - - - - - E-28

8.2 Fully Closed Encoder Cable - - - - - - - - - - - - - - - - - - - - - - E-28

8.3 The Core on the Cable - - - - - - - - - - - - - - - - - - - - - - - - - - E-28

8.4 Cable Clamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-29

8.5 Wiring Examples - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-30

Revision History

E-3

This instruction manual covers Σ-II Series SGDH DeviceNet* Application Module (herein-

after called NS300 Module), which is an application module to be connected to Σ-II series

SGDH SERVOPACK for DeviceNet.

To properly use the NS300 Module, read this manual thoroughly and retain for easy refer-

ence for inspections and maintenance etc.

* DeviceNet is a trademark of ODVA (Open DeviceNet Vender Associa-

tion, Inc.).

Reference materials are listed below:

Manual Titles Manual No.

Σ-II Series SGMH/SGDH User’s Manual SIEPS80000005

Σ-II Series SGDH DeviceNet Application Module User’s Manual SIE-C718-6

AC SERVOMOTOR INSTRUCTIONS TOE-C231-2

Σ-II Series SGDH Instruction Manual TOB-S800-32

E-4

SYMBOLS FOR SAFE OPERATION

In this manual, the NOTES FOR SAFE OPERATION are classified as “WARNING” or

“CAUTION”. The following symbols are used.

Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious personal injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate personal injury and/or damage to the equipment.

In some instances, items described in may also result in a serious accident. In

either case, follow these important items.

NOTES FOR SAFE OPERATION

Read this manual thoroughly before installation, operation, maintenance or inspection of the

AC Servo Drives.

CHECKING ON DELIVERY

STORAGE AND TRANSPORTATION

WARNING

CAUTION

(Ref.No.)

• When SGDH SERVOPACK is used with an NS300 Module mounted, the parame-

ters are automatically set so that the NS300 Module can be operated from the first

power ON.

For details of parameter setting methods, refer to Σ-II Series SGM/SGDH User’s Manual

(SIEPS80000005).

E-9

CAUTION

• If disinfectants or insecticides must be used to treat packing materials such as wooden frames,

pallets, or plywood, the packing materials must be treated before the product is packaged, and

methods other than fumigation must be used.

Example: Heat treatment, where materials are kiln-dried to a core temperature of

56°C for 30 minutes or more.

If the electronic products, which include stand-alone products and products installed in machines, are

packed with fumigated wooden materials, the electrical components may be greatly damaged by the

gases or fumes resulting from the fumigation process. In particular, disinfectants containing halogen,

which includes chlorine, fluorine, bromine, or iodine can contribute to the erosion of the capacitors.

CAUTION

E-5

INSTALLATION

WIRING

OPERATION

(Ref.No.)

• Never use the equipment where it may be exposed to splashes of water, corrosive

or flammable gases, or near flammable materials.

Failure to observe this caution may lead to electric shock or fire.

E-13

CAUTION

(Ref.No.)

• SERVOPACK grounding must be in accordance with the national code and consis-

tent with sound local practices.

Failure to observe this warning may lead to electric shock or fire.

E-16

(Ref.No.)

• Do not connect three-phase power supply to SERVOPACK output terminals U, V,

and W.

Failure to observe this caution may lead to personal injury or fire.

E-16

• Securely tighten screws on the power supply and motor output terminals.

Failure to observe this caution may result in a fire.

E-16

WARNING

CAUTION

(Ref.No.)

• To avoid inadvertent accidents, run the servomotor only in test run (without load).

Failure to observe this caution may result in personal injury.

E-25

• Before starting operation with a load connected, set up parameters suitable for the

machine.

Starting operation without setting up parameters may lead to overrun failure.

E-25

• Before starting operation with a connected load, make sure emergency-stop proce-

dures are in place.

Failure to observe this caution may result in personal injury.

E-25

• During operation, do not touch the SERVOPACK’s heatsink.

Failure to observe this caution may result in burns.

E-26

CAUTION

E-6

INSPECTION AND MAINTENANCE

(Ref.No.)

• Be sure to turn OFF power before inspection or maintenance.

Otherwise, electric shock may result.

E-27

• Never open the terminal cover while power is ON, and never turn ON power when

the terminal cover is open.

Otherwise, electric shock may result.

E-27

• After turning OFF power, wait at least five minutes before servicing the product.

Otherwise, residual electric charges may result in electric shock.

E-27

(Ref.No.)

• Never change wiring while power is ON.

Failure to observe this caution may result in electric shock or personal injury.

E-27

WARNING

CAUTION

Note the following to ensure safe application.

• Some drawings in this manual are shown with the protective cover or shields removed, in order

to describe the detail with more clarity. Make sure all covers and shields are replaced before

operating this product.

• Some drawings in this manual are shown as typical example and may differ from the shipped

product.

• This manual may be modified when necessary because of improvement of the product, modifi-

cation or changes in specifications.

Such modification is made as a revision by renewing the manual No.

• To order a copy of this manual, if your copy has been damaged or lost, contact your

YASKAWA representative listed on the last page stating the manual No. on the front cover.

• YASKAWA is not responsible for accidents or damages due to any modification of the product

made by the user since that will void our guarantee.

E-7

WARNING LABEL

May causeburn.

Disconnect all power and wait 5 min.

before servicing. May causeelectric shock.

Do not touch heat sink when power is ON.

Use proper grounding techniques.

WARNING

CAUTION

SERVOPACK warning label position

SERVOPACK Warning Label and Grounding Mark Position

Andere Handbücher für S-II Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere YASKAWA Steuereinheit Handbücher

YASKAWA

YASKAWA CM006 Bedienungsanleitung

YASKAWA

YASKAWA FM 054 Bedienungsanleitung

YASKAWA

YASKAWA IM 208-1DPx1 Bedienungsanleitung

YASKAWA

YASKAWA 62K-JJK0 Bedienungsanleitung

YASKAWA

YASKAWA IM 053MT Bedienungsanleitung

YASKAWA

YASKAWA SPEED7 CPU-SC 313-5BF23 Bedienungsanleitung

YASKAWA

YASKAWA SLIO CP 042-1IO00 Bedienungsanleitung

YASKAWA

YASKAWA VIPA System SLIO Bedienungsanleitung

YASKAWA

YASKAWA VIPA System SLIO Bedienungsanleitung

YASKAWA

YASKAWA Profibus-DP SGDH Series Bedienungsanleitung

YASKAWA

YASKAWA VIPA System 200V Bedienungsanleitung

YASKAWA

YASKAWA MP2000 Series Bedienungsanleitung

YASKAWA

YASKAWA motoman NX100 Bedienungsanleitung

YASKAWA

YASKAWA FM 054 Bedienungsanleitung

YASKAWA

YASKAWA VIPA SLIO FM 050 Bedienungsanleitung

YASKAWA

YASKAWA JEPMC-OP3C01-E Bedienungsanleitung

YASKAWA

YASKAWA AC Drive V1000 Option SI-EM3/V Bedienungsanleitung

YASKAWA

YASKAWA System 300S CP 342-1DA70 Bedienungsanleitung

YASKAWA

YASKAWA CM085 Bedienungsanleitung

YASKAWA

YASKAWA YASNAC 3000G Bedienungsanleitung

YASKAWA

YASKAWA SI-EM3 Bedienungsanleitung

YASKAWA

YASKAWA AI-A3 Bedienungsanleitung

YASKAWA

YASKAWA CM092 Bedienungsanleitung

YASKAWA

YASKAWA MP2000 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung