ZALMAN CNPS 8000 Bedienungsanleitung

* Applies to all versions of CNPS8000 LED.

* Please read this manual thoroughly before installation.

http://www.zalman.co.kr http://www.zalmanusa.com

(English version)

CNPS 8000

(English version)

※

The specifications of any product may change without prior notice to improve performance.

3. Exploded View

1. Features

1) Noiseless and vibration-free operation in Silent Mode.

2) Optimum performance and quick heat dispersion achieved with the use of heatpipes.

3) Optimized fin design for lightness and higher performance.

) Ultra quiet 92mm fan.

5) Compatible with Slim and Low Profile Computer Enclosures.

6) Compatible with Intel Pentium D (Socket 775), Intel Pentium (Socket 775), AMD Athlon 6 X2

(Socket 939), and AMD Sempron/AMD6 (Socket 75 /939/9 0).

7) FAN MATE 2 included for manual adjustment of fan speed.

1) Cooler (CNPS8000)

2) FAN MATE 2

- Output Voltage : 5V ~ 11V

2 %

- Power Consumption : 6W or lower

2. Specifications

CNPS8000

Model

Spec.

Materials

Weight

Thermal Resistance

Dimensions

Dissipation Area

Bearing Type

Fan Speed

Noise Level

Input Voltage

Pure copper and pure aluminum

350g

0.13 ~ 0.20°C/W

108(L) X 108(W) X 62.5(H)

2,815

㎠

2-Ball Bearing

1,400rpm ± 10% ~ 2,600rpm ± 10%(1)

18.0dBA ± 10% ~ 30.0dBA ± 10%(2)

12V

(Note 1)

The fan operates at 2,800rpm if connected directly to the motherboard’s fan connector without

the use of FAN MATE 2.

(Note 2) Noise measured 1m away from the source.

Fan

Heat Sink

Fan Guard

Fan Support

※

The specifications of any product may change without prior notice to improve performance.

󳣍Korean Patent Application No. 2005-117680

󳣍Korean Design Application No. 2005-3771

󳣍Patent Applications pending in over 10 nations around the world including the United States, Europe,

China, and Taiwan.

4. Patents

. Components

1) Common Components

❶

One CNPS8000

❷

One Thermal Grease

❸

One FAN MATE 2 (Fan Speed Controller)

❹

One Cable for FAN MATE 2

❺

One Double-sided Tape

(for attaching FAN MATE 2)

❻

One User’s Manual

2) Components for Intel Pentium

D/Pentium (Socket 775)

❼

Two Clips for Socket 775

❽

One Backplate for Socket 775

3) Components for AMD AMD6

(Socket 75 /939/9 0)

❾

One Clip-A for AMD6

❿

One Clip-B for AMD6

❸❹❺❻

❼

❾

❽

❿

❷

❶

1) Keep and store the product away from the reach of children.

2) Check the components list and condition of the product before

installation. If there is any problem, contact the shop of purchase

to get a replacement or refund.

3) If excessive force is exerted on the fan, it may result in

malfunction or damage to the product and/or system.

) Zalman Tech Co., Ltd. is not responsible for any damages

due to external causes, including but not limited to, improper

use, problems with electrical power, accident, neglect,

alteration, repair, improper installation, and improper testing.

5) CPU and motherboard are subject to damage if the product

is incorrectly installed. Familiarize yourself with the “Installation”

steps before installing the CNPS8000.

6) See the picture on the right for product dimensions to check

whether the product interferes with any motherboard

components.

6) Avoid inserting objects or fingers into the fan while it is in

operation.

5. Precautions

PSU

VGA Card Slot

Case chassis Cover

50mm 58mm

5 mm 5 mm

System Fan

62.5mm

ODD

※

The specifications of any product may change without prior notice to improve performance.

7. Compatible CPUs

1) All Intel Socket 775 CPUs

- Pentium D

- Pentium

- Celeron D

2) All AMD Socket 75 /939/9 0 CPUs

- Opteron

- Athlon 6 X2

- Athlon 6 FX

- Athlon 6

- Sempron

Air Guide equipped cases recommended for CPUs with high TDP.

Zalman’s Super Thermal Grease recommended for better thermal performance.

8. Installation

1) Intel Pentium D / Pentium - Socket 775

①①

Backplate Installation

Remove the protective film of theBackplate for

Socket 775, and attach the backplate after

aligning it with the holes from the backside of

motherboard.

②②

Thermal Grease Application

Clear off any particles and residue from the top

of the CPU then spread the enclosed Thermal

Grease generously on the surface of the CPU

that makes contact with the base of CNPS8000.

③③

Clip Installation

Inter rock the pair of Clips for socket 775 by

sliding them into each other between the

heatsink's base and fin.

Caution) The arrowhead marking on each clip must

be in line with the arrowhead markings on

the heatsink's base.

④④

Cooler Installation

Place the CNPS8000 on the center of the CPU.

Slightly screw the four bolts onto the backplate’s

nipples, then tighten each bolt one rotation at a

time until all are completely tightened.

Note 1) Excessive force can result in damage to the

nipples.

Note 2) Exerting excessive force on the fan with the

driver can result in malfunction.

⑤⑤

Power Connection (FAN MATE2 Installation)

󳣍Please refer to FAN MATE 2 Installation and Usage on page 5.

Mounting hole

Nipple Protective Film

Backplate for

Socket 775

Thermal Grease

CPU(IHS)

Base

Bolt

Clip for

Socket 775

※

The specifications of any product may change without prior notice to improve performance.

2) AMD Sempron / AMD6 - Socket 75 /939/9 0

①①

Thermal Grease Application

Clear off any particles and residue from the top

of the CPU then spread the enclosed Thermal

Grease thinly on the surface of the CPU that

makes contact with the base of CNPS8000.

②②

Clip Installation

Inter rock the pair of Clips for AMD 6 by sliding them into each other between the heatsink's base and fin.

Caution) The arrowhead marking on each clip must be in line with the arrowhead markings on the heatsink's base.

③③

Cooler Installation

Hook the hole of Clip-B onto the retention frame’s lug. Then hook the hole of Clip-A onto the retention

frame’s lug by pressing down on the lever of the Clip-A.

Note ) Set the direction of the Clips in a manner so that there is no interference with other components

of the motherboard.

Uninstalling the Cooler

To uninstall the CNPS8000, press onto the clip slot with the use of a ( -) driver, then push off the

lever to disconnect the clip hole from the retention frame’s lug.

④④

Power Connection (FAN MATE2 Installation)

󳣍Please refer to FAN MATE 2 Installation and Usage on page 5.

Clip-A for AMD6

Base

Clip-B for AMD6

Lever

Lug

Clip slot

Thermal Grease

CPU(Lid)

※

The specifications of any product may change without prior notice to improve performance.

10. Notes on Usage

1) Checking CPU Compatibility

Please refer to “Compatible CPUs” on page 3 to confirm that your CPU is compatible before using the

CNPS8000.

2) Cautions During Booting

The computer system may automatically shut down when booting the computer after the system

monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully

turn the speed control knob in the clockwise direction before booting to disable the ‘CPU Fan Detected’

option in BIOS setting, or set the CPU fan’s rotational speed to less than or equal to 1300rpm in the

system monitoring program.

Note) Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm.

However, booting can be possible even at low fan rpm if the BIOS settings are updated.

For more information on updating your BIOS, please refer to the website of your motherboard

manufacturer.

There are motherboards which fail to detect the rpm while operating the cooler on Silent Mode, but

this does not affect computing performance.

3) OVERCLOCKING

Zalman Tech Co., Ltd. is not responsible for any damages in CPU resulting from OVERCLOCKING.

9. FAN MATE 2 Installation and Usage

1) Installing FAN MATE 2 on the Inside of the System 2) Installing FAN MATE 2 on the Outside of the System

Connect the appropriate 3-pin connector on the

cable to the motherboard fan header and the

CNPS8000’s fan connector.

Pull the 6-pin connector out of the system

through the back and connect it to FAN MATE 2,

which should be installed on the case using the

included double-sided tape (⑤).

◆When the speed control knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in

Silent Mode. Turned fully clockwise, it operates in Normal Mode. You can select the desired fan speed

by turning the knob.

Note) FAN MATE 2 has been specifically designed for the fan of this product.

Zalman Tech Co., Ltd. is not responsible for any damage to systems or CPUs caused by using it

with other types of fans.

Fan Connector

(CNPS8000)

Motherboard

Double - sided Tape

FAN MATE 2

6-Pin Connector

※

The specifications of any product may change without prior notice to improve performance.

13.

Home Theatre PC Enclosures

TNN Computer Enclosures are the world’s first environment-friendly noiseless computer enclosures

that operate without the use of a fan. TNN Computer Enclosures use the aluminum enclosure itself

as a heatsink. They are ideal for environments that require silence, as well as for home theatre

systems and multi-media systems.

The HD160 is designed for ultra quiet home theatre

PC operation, utilizing optimized ventilation and

anti-vibration reinforcements, making it ideal for

environments that require silence such as living

rooms, bedrooms, educational facilities, and offices.

For more information, please visit our website.

12.

TNN (Totally No Noise) Computer Enclosures

TNN 300 TNN 500AF

HD1 0

The use of Zalman’s Noiseless Power Supply, CPU Cooler, Case Fan, Fanless Northbridge

Cooler, and Video Card Cooler will allow you to achieve stable performance and maintain a

noiseless environment.

11. Zalman Computer Noise Prevention System

Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler

Noiseless Case Fan Quiet VGA Cooler Fan Controller

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN CNPS6500B-AlCu Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000B Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS14X Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR1 V2 Kurzanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000B-AlCu Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR 1 Bedienungsanleitung

ZALMAN

ZALMAN CNPS9700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C-Cu Bedienungsanleitung

ZALMAN

ZALMAN ZM-RF1 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7500 LED Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AT Bedienungsanleitung

ZALMAN

ZALMAN CNPS9900A LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS16X Bedienungsanleitung

ZALMAN

ZALMAN Optima CNPS8X Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000B Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS9800 MAX Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C-Cu/AICu Bedienungsanleitung

ZALMAN

ZALMAN ZM80D-HP Bedienungsanleitung

ZALMAN

ZALMAN FS-V7 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C Series Bedienungsanleitung

ZALMAN

ZALMAN ZM500-ST Bedienungsanleitung

ZALMAN

ZALMAN VF900-Cu Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung