Zcorporation ZScanner 700 Bedienungsanleitung

Self-Positioning Handheld 3D Scanner

ZScan™1.3 User Guide

ZScan: Version 1.3

CAUTION NOTES...................................................................................................1

LASER WARNING..................................................................................................2

WARNING LABELS AND LOCATIONS.................................................................3

WHAT’S NEW ........................................................................................................4

System Overview...................................................................................................5

System description.............................................................................................5

General care......................................................................................................7

Scanner Manipulation ........................................................................................7

Connecting the scanner .................................................................................8

Storing your ZScanner 700 ............................................................................9

Specifications...................................................................................................10

Concept............................................................................................................11

ZScan™................................................................................................................12

ZScan minimal required configuration..............................................................12

System Installation / Start-up...........................................................................12

ZScan Software installation..............................................................................13

License and configuration files update.............................................................18

ZScan software removal ..................................................................................18

General Concepts............................................................................................19

File Types.....................................................................................................19

Positioning Features.....................................................................................19

References ...................................................................................................20

Surface and Volume .....................................................................................20

Facets, Edition and Multi-resolution..............................................................20

Menu.............................................................................................................21

Toolbar..........................................................................................................23

Scan tree ......................................................................................................26

Expanding Panel...........................................................................................27

3D viewer controls ........................................................................................30

Status Bar.....................................................................................................31

Sensor Configuration .......................................................................................31

Sensor Calibration............................................................................................33

Build Reference ...............................................................................................34

Scanning procedures........................................................................................35

Object preparation............................................................................................35

Applying targets............................................................................................35

Reference targets.........................................................................................36

Starting the Software........................................................................................37

Adjusting the surface settings..........................................................................37

Configuring the sensor.....................................................................................39

Importing positioning targets 40

Acquiring data..................................................................................................40

Proper distance digitizing..............................................................................41

Editing the scan ...............................................................................................43

Saving your work..............................................................................................43

Troubleshooting................................................................................................44

PLEASE READ THE COMPLETE MANUAL BEFORE USE. OPERATING

YOUR ZScanner 700 LASER SCANNER USING PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

AVOID DIRECT EYE CONTACT WITH THE LASER BEAM.

ELECTROSTATIC DISCHARGES COULD DISCONNECT THE DEVICE.

DISREGARDING ANY OF THE RULES AND CARE RECOMMENDATION

INCLUDED IN THIS MANUAL MAY VOID THE SYSTEM WARRANTY.

Please read and follow all WARNING statements throughout this manual

USER LICENSE

The ZScanner 700 system and the ZScan software are provided according to a

license agreement. Any partial or complete copying of this software without

proper authorization is prohibited. Distribution of the software without a written

authorization from Z Corporation is forbidden. The Purchaser shall not reproduce

or duplicate, dissemble, decompile, reverse engineer, sell, transfer or assign, in

any manner the Scanner, the Software and the System. ZScanner 700 is a

trademark of Z Corporation.

CAUTION NOTES

This system uses a class II laser which is considered eye and skin safe but can

cause eye damage if exposed directly for a prolonged time. Natural human

reflexes will normally make the subject blink or look away before any

damage is inflicted to the eyes. Any usage procedures other than those

specified in this document could result in hazardous laser radiation

exposure. Use the following usage precaution:

Never stare into the beam, neither directly nor from a mirror-like

surface. Human skin is not considered as a reflective surface.

MEDICAL USAGE: warn subject not to stare into the beam.

Subjects under effect of any medication and young children could

possibly have their natural aversion reflex affected and it may be

advisable to wear a blindfold.

The ZScanner 700 should NEVER be opened for any reason as

there are no internal adjustments. In case of a malfunction, contact

the manufacturer or distributor.

LASER WARNING

WARNING LABELS AND LOCATIONS

Figure I - Laser labels and locations

WHAT’S NEW

ZScan 1.3

Full compatibility with Windows Vista 32 bits OS

Enhanced, more functional and efficient facet edition mode

New reliable, fast and powerful memory

management

algorithms (up to 70% more laser curves than 1.2)

Session title added to the title bar

Help menu

Enhanced overall look & feel

Enhanced copy features functionality

Enhanced surface reconstruction speed (up to 40% faster than

1.2 on Dual Core CPUs)

Multi-Operations enabled volume settings with live preview

New Fit Volume functionality

Calibration information added to the calibration window.

Faster and more reliable than ever!

ZScan 1.2

Automatic isolated patches remover (see 2.7.4.6)

Positioning model optimizer (see 2.7.4.1)

Multilingual support (French and English available, more to

come)

Improved performance and memory management

Improved surface reconstruction for thin surfaces

Clearer and sharper boundaries

Possibility to import targets acquired with photogrammetry (see

3.5)

Full support for UNICODE characters

Improved multi-resolution

Support for user selectable measurement units

Support for reference adapters

System Overview

System description

The ZScanner 700 system includes the following components:

ZScanner 700 scanner

Ergonomic stand

Reflective targets

Calibration verification plate

Carry-on case

Firewire PCMCIA card

Firewire cable

Firewire power supply

Laptop computer (optional)

ZScan software

Instruction manual (PDF)

Figure 1.1 - ZScanner 700

General care

The ZScanner 700 contains optical precision parts and must be handled with

care to avoid damage to the components or the calibration system. For

transportation, the system must be placed in the carry-on case provided with the

kit. The system must be stored in a dry, dust-free place and kept at ambient

temperature.

The scanner must be kept on its support or in its carrying case when not

used.

Clean the interference filters with a clean and dry cloth.

Never open any of the system’s components. By doing so, the user may

inadvertently damage the system and the ZScanner 700 will have to be

recalibrated. Only Z Corporation staff or authorized technicians are qualified to

work on the scanner. No maintenance is required by the end user. If the system

shows troubles or dysfunctions, it must be sent to Z Corporation or to an

authorized reseller.

Sca

nner Manipulation

The first step when it comes to scanning with the ZScanner 700 is to be able to

connect the system properly. Also, in order to avoid recalibration, the ZScanner

700 should always be properly stored in its case.

Connecting the scanner

The first step is to turn on the computer.

Safely place the ZScanner 700 on its stand.

Figure 1.2 Position of the ZScanner 700 on the support

Next, the FireWire adapter should be plugged into the computer with the cables

plugged in. The connections are shown on the pictures below:

Figure 1.3 Scanner's connection on the computer

The outlet end of the power supply cable should be plugged into a power outlet

using the appropriate outlet adapter. The end of the FireWire cable with the right-

angle 6-pin plug should be plugged into the ZScanner 700.

Launch ZScan.

Inhaltsverzeichnis

Andere Zcorporation Scanner Handbücher

Zcorporation

Zcorporation ZScanner Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung