ZKTeco ZM100 Bedienungsanleitung

Installation Guide

Version: 1.0

Date: September, 2017

ZM100 Face and Fingerprint Lock

Contents

Before Installation.................................................. 1

Diagram.......................................................1

Packing List ...................................................2

Notes................................................................4

Cautions.......................................................4

Installation Environment .....................................5

Check door open direction ...................................6

Tips............................................................7

Installation..........................................................9

Quick operation guide.............................................17

Before Installation

Diagram

Packing List

BCI



Wooden Door Security Door

Check door thickness, prepare the proper screws and spindles.

Door Thickness

35-45mm

45-50mm

50-60mm

60-65mm

D Spindle

(8*8)

65mm

85mm

L Spindle

(5*5)

50mm

60mm

J Screw

(M4)

25mm

40mm

J Screw

(M5)

25mm

40mm

Notes: Screws and spindles for doors thickness of 35-65mm are all included in the standard

package. Please apply the corresponding package according to the actual door thickness.

For the door thickness of 65-90mm, the standard package does not have the proper screws

and spindles. If you need them, please contact with the dealer.

Notes

Cautions

1. New lock can not unlock with ANY verification. Please register one administrator at

least first, if there is no any administrator, registration for normal users is not allowed.

2. The lock is equipped with mechanical keys for manual unlocking. Remove mechanical

keys from the package and keep them in a safe place.

3. The lock is equipped with lithium battery.

4. It's forbidden to remove the battery, if you need to replace with newly-bought

battery, please operate under the guidance of professional technique person.

5. Please replace the battery once the lock prompts "Low Battery". Please use the original

charger to charge.

6. Without any operation, the lock will power off automatically within 10 seconds.

7. Keep your fingers, screen and camera clean when using this lock.

1.0m

Installation Environment

This lock is recommended to be installed in the indoor and semi-outdoor environment,

where the luminance is within 5000Lux.

Recommended installation position:

There are several situation will affect the recognition:

Expose to direct

sunlight (outdoor)

Expose to direct

sunlight through

the window (indoor)

Expose to slant

sunlight through

the window (indoor)

Expose to strong

light at a close

distance (indoor)

Left Inward Right Inward

Left Outward Right Outward

GEG

Check door open direction.

Note : Please install the mortise and strike plate according to the above pictures.

Check door type.

Mortise without hooks is applied to wooden door,

and mortise with hooks is applied to security door.

(Without hooks) (With hooks)

180°

Tips

1. How to change the direction of latch bolt?

Step1: Push the switch to the end

Step2: Push the latch bolt into the mortise

Step3: Rotate the latch bolt at 180° inside mortise,

then loose it.

2. How to change the handle direction?

Front Lock Back Lock



Loose

screw

4.How to use mechanical key ?

3. How to use emergency power?

9V Alkaline

Battery

(6LR61)

1.Key A is used for lock installer

and upfitter. After the

installation completed, the

owner check and take back Key

A, insert Key B into the keyhole

and rotate 90°, then Key A will

be unable to open the lock.

2.Key B is packed in the sealed

plastic wrap for safety, which is

used only for house owner.

Unlocking method: Please remove

the silicon stopper of the keyhole

first, then insert the key into the

keyhole and rotate 90° to left or

right, press the handle to unlock.

Notes: Key A and Key B are designed

for the property safety of the

house owner:

Caution: Please do not press down the

handle before rotating the key.

Andere Handbücher für ZM100

Inhaltsverzeichnis

Andere ZKTeco Sperren Handbücher

ZKTeco

ZKTeco AL30B Bedienungsanleitung

ZKTeco

ZKTeco L 6800 Bedienungsanleitung

ZKTeco

ZKTeco TL300 Bedienungsanleitung

ZKTeco

ZKTeco SBTL9000 Series Bedienungsanleitung

ZKTeco

ZKTeco CL10 Bedienungsanleitung

ZKTeco

ZKTeco ZM100 Bedienungsanleitung

ZKTeco

ZKTeco TL400B Bedienungsanleitung

ZKTeco

ZKTeco ML200 Series Bedienungsanleitung

ZKTeco

ZKTeco DL30B Bedienungsanleitung

ZKTeco

ZKTeco Padlock Bedienungsanleitung

ZKTeco

ZKTeco DL30DB Bedienungsanleitung

ZKTeco

ZKTeco AL30B Bedienungsanleitung

ZKTeco

ZKTeco AL20B Bedienungsanleitung

ZKTeco

ZKTeco DL30B Bedienungsanleitung

ZKTeco

ZKTeco TL800 Bedienungsanleitung

ZKTeco

ZKTeco AL10B Bedienungsanleitung

ZKTeco

ZKTeco DL30B Bedienungsanleitung

ZKTeco

ZKTeco DL30Z Bedienungsanleitung

ZKTeco

ZKTeco AL20B Bedienungsanleitung

ZKTeco

ZKTeco PL10 Series Bedienungsanleitung

ZKTeco

ZKTeco AL10B Bedienungsanleitung

ZKTeco

ZKTeco PL10 Series Bedienungsanleitung

ZKTeco

ZKTeco ZL500 Bedienungsanleitung

ZKTeco

ZKTeco AL40 Series Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung