Zortrax M200 Bedienungsanleitung

Nozzle Cleaning

SOURCE:

https://support.zortrax.com/nozzle-cleaning/

Table Of Content

Scrubbing the Nozzle 3

Unclogging the Nozzle 4

Unloading the Material 5

Nozzle Removal 6

Unplugging the Power Cable 7

Cleaning the Nozzle 8

Removing the Nozzle from the Container 9

Nozzle Assembly 10

Scrubbing the Nozzle

Take the spatula from the Starter Kit and gently scrub the nozzle to remove material

remains.

Unclogging the Nozzle

From the menu choose “Material” and then “Load the material” option. Follow the

instructions displayed on the screen.

Use the pliers from the Starter Kit to hold a needle. As soon as the printer starts to load

the material, insert the end of the needle into the nozzle to unclog it.

If that doesn’t help, follow the rest of the steps from this manual.

Unloading the Material

From the menu choose “Material” and then “Unload the material” option. The extruder

should start to heat up automatically. Once the extruder is hot, the motor will start to

unload the material.

Nozzle Removal

Unscrew the nozzle counterclockwise (when viewed from below). Use the nozzle key

from the Starter Kit box. Removing the nozzle should take place while the extruder is still

hot. When the nozzle is loose, remove it using pliers.

Unplugging the Power Cable

Turn off the printer and unplug the power cable. Wait about 15 minutes and let the

machine cool down.

Cleaning the Nozzle

If you were printing with Z?GLASS / Z?PETG / Z?PCABS / Z-ESD, print a small-sized

object using Z?ABS. This will help to extrude material remains from the nozzle.

Using the pliers, place the nozzle in a container filled with acetone.

Make sure that the nozzle is cold before you put it into the container.

Removing the Nozzle from the Container

After 8-10 hours take the nozzle out of the container with pliers.

Nozzle Assembly

Install the nozzle in its place in the hotend and screw it in clockwise using the nozzle key

(when viewed from below).

Screw in the nozzle gently; do not use too much force.

Powered by TCPDF (www.tcpdf.org)

Andere Handbücher für M200

22

Inhaltsverzeichnis

Andere zortrax 3D-Drucker Handbücher

zortrax

zortrax M200 Gebrauchs- und Pflegehandbuch

zortrax

zortrax M200 Plus Leitfaden

zortrax

zortrax Z-PLA Pro Montageanleitung

zortrax

zortrax M200 Plus Gebrauchs- und Pflegehandbuch

zortrax

zortrax Z-Axis Gebrauchs- und Pflegehandbuch

zortrax

zortrax M300 Merkblatt

zortrax

zortrax FEP Film Gebrauchs- und Pflegehandbuch

zortrax

zortrax Inventure Bedienungsanleitung

zortrax

zortrax M200 Plus Bedienungsanleitung

zortrax

zortrax M200 Bedienungsanleitung

zortrax

zortrax HEPA Cover Gebrauchsanweisung

zortrax

zortrax M200 Gebrauchs- und Pflegehandbuch

zortrax

zortrax M200 Plus Merkblatt

zortrax

zortrax M200 Bedienungsanleitung

zortrax

zortrax M200 Gebrauchs- und Pflegehandbuch

zortrax

zortrax Apoller Bedienungsanleitung

zortrax

zortrax M200 Bedienungsanleitung

zortrax

zortrax M200 Plus Bedienungsanleitung

zortrax

zortrax M300 Bedienungsanleitung

zortrax

zortrax M300 Bedienungsanleitung

zortrax

zortrax M300 Bedienungsanleitung

zortrax

zortrax M200 Plus Gebrauchs- und Pflegehandbuch

zortrax

zortrax Inkspire Bedienungsanleitung

zortrax

zortrax Endstop Sleeve Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch