Zte MF636 Einrichtungshandbuch

ZTE Rogers

MF636 USB Modem

Quick Start User Guide

www.ztecanada.com

© ZTE Corporation, 2008.

-1-

1. Insert the SIM Card into the modem

The SIM slot is located above the

USB connector

Before using the modem make sure the SIM

card supports data services. Insert the SIM

card as shown with the gold contacts facing

down and the beveled edge on the left hand

side.

Push the SIM card in as far as it will go.

2. Connect the USB modem to your PC

Connect the modem to your PC’s USB port directly. You may alternatively use the

supplied USB cable. In most cases the single cable should suffice. However, to

increase the power delivered to the modem, use the double USB cable if required.

After the modem is connected, your PC will launch the installation application

software automatically.

Note: If your security settings preventAutorun then you will have to start the process

manually. Navigate to the CDROM and double click the Autorun.exe file to start the

software installation

-2-

3. First Time Software Installation

Select your language and click OK.

-3-

First Time Software Installation Continued…

Click Next to continue.

-4-

First Time Software Installation Continued…

Read the license agreement, select I accept the terms of the license agreement

and press Next.

-5-

First Time Software Installation Continued…

Click Next to accept the default installation location or press Change to specify your

own path.

-6-

First Time Software Installation Continued…

The wizard will take a few minutes to install software. Click Finish to complete.

-7-

4. Using your Modem

Connect your modem to the computer. Your computer will launch the Connection

Manager application automatically. The modem will initialize and the main user

interface will appear.

-8-

Using your Modem Continued…

Click the Internet button and then click Connect to establish a connection to the

internet.

5. Removing the Modem Safely

Please close the application software first, use the Safe Hardware Removal

procedure and then pull out the modem or USB cable.

-9-

6. LED Indicator

LED Indicator USB Modem Working Status

Yellow Power on. Not registered on the 2G or 3G network

Green Solid Registered on the 2G network.

Green blinking Active data transfer on the 2G network

Blue solid Registered on the 3G network.

Blue blinking Active data transfer on the 3G network.

Red solid Roaming status

Red blinking Active data transfer in roaming status

7. Functions & Operation

Connects to the internet.

Messages Interface

View your Contacts

Opens the Rogers Home Page

Change system settings

View the Help file

-10-

Andere Handbücher für MF636

5

Inhaltsverzeichnis

Andere Zte Modem Handbücher

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung

Aztech

Aztech HW831 Bedienungsanleitung