Zte MF10 Bedienungsanleitung

3G Wireless Router

Fixed Wireless Adapter

Quick Setup Guide

Contents

................................

..............................

Description:

................................

................

Features:

................................

.....................

LED Indicator

................................

............

Interface Description

................................

Installation

................................

......................

Inserting the (U)SIM Card

................................

........................

Inserting the modem

................................

Connecting computer

................................

Connecting the external power

................................

.................

Switching on your dev

ice

................................

..........................

Power supply

................................

..................

Notes on Service and Coverage

................................

....................

Internet Ac

cess

................................

...................

Preparation

................................

.....................

Settings

................................

...........................

................................

..........................

Quick setup

................................

................

3G Settings

................................

...............

WAN Connection

................................

....

Disconnecting from the Internet

................................

.................

Description:

Features:

LED Indicator

ZTE MF10 is a portable 3G wireless router providing wireless broadband internet

service on 2G and 3G network, user can simply connect co

mputers to MF10 via

Ethernet or WLAN interface to get high

speed internet connectivity, The USB modem

stick on MF10 via a USB 2.0 Master high speed port can support multi

mode 3G

bands, such as HSPA/UMTS/EDGE/GPRS/GSM, MF10 comply with 802.11b/g

standard w

ith Wi

Fi security.

Size:93 × 70 × 25mm

Weight:83g

Tri

bands HSUPA/HSDPA/UMTS(850/1800/2100MHz)

Four bands EDGE/GPRS/GSM(850/900/1800/1900MHz)

One USB 2.0 Master high speed port

Two RJ45 Ethernet ports

IEEE 802.11b/g WLAN access point(supporting

WEP/WPA/WPA2 security)

Server and DNS proxy

WEB based interface for local management

. P

External power supply works

normally.

OFF

External power suppl

y is disconnected

or power off.

WLAN

works normally.

Blinking

Data transmission

OFF

WLAN

works abnormally.

PPP

Internet connected

Blinking

The router attempts to connect

Internet.

Indicator

State

Description

Indicator

State

Description

Notes:

The indicators (including

WLAN

and PPP) are all blinking in green when:

•

? The (U)SIM card has not been installed.

•

? The PIN code or PUK code is required.

•

? The router can not work normally.

WPS

LAN 1

LAN

POWER Socket

POWER Switch

OFF

Internet disconnected and not attempt

to conn

ect.

WPS

authentication

is started and

available.

Blinking

WPS

authentication

is in progress or

unavailable.

OFF

WPS

authentication

is not started.

LAN

Off

Out of Connection

Solid Green

Connection

Flashing Green

Data Service Process

: WPS button is used to start Wi

Fi Protected Setup authentication process.

: Ethernet connections to computer.

: Connection to the external po

wer supply.

: Turn the router ON or OFF. Hold on for several seconds to restore the

factory default settings.

、

Interface Description

Installation

Inserting the (U)SIM Card

Inserting the modem

Insert the (U)SIM card into the modem(supplied by ZTE).

Take down the modem cap, and then the USB connector is visible.

Pull

out

the plastic socket above the USB connector out.

Insert the (U)SIM card into the socket, and make sure that metal contact area facing to the

modem.

Insert the plastic socket into the modem. Y

ou can hear a click when the (U)SIM card socket

locks into place.

Insert the modem into the router.

Rotate the

front

cover.

Notes:

Do not pul

l the (U)SIM socket rudely for the socket is fixed with the modem.

Otherwise the socket will get damaged.

Plug the USB connector into the USB port

Connect y

our computer to the LAN interface

using the Ethernet cable (RJ45)

to the

WLAN

Wireless interface.

Connect the external power adaptor to a standard power outlet.

Insert the plug into the socket at the rear of the router.

Warning:

Please power off the router and remove the external power adapter before removing or

inserting the modem, if not, the router or modem may be damaged.

Notes:

The router will adapt the Ethernetcable style (crossover orstraight) automatically.

Connecting computer

Connecting the external power

itching on your device

Pow

er supply

Notes on Service and Coverage

Preparation

Turn the power switch on to get started.

Wait 1~2 minutes after turning the router on before you use the service. The power

indicator should be lit on.

For normal operation connect the router to the external power adapter. In case of power

failure or when there is no available external power supply, the router can not work.

If you cannot get service, make sure that

•

You are in an area which has sufficient network coverage.

•

You are using the correct (U)SIM card.

•

If necessary you need enter y

our PIN or PUK code.

•

Please wait 1

2 minutes for the modem to initialize, attach to the network and obtain an IP

address.

The router does not require any drivers, and it supports all operating systems with Ether

net

LAN capability, such as Windows 2000, XP, Vista, MAC OS X and Linux. The router

supports two computers surfing on internet using Ethernet cable

at the same time, and also

supports Wireless LAN connection.

Before using the data service, make sure:

•

The (U)SIM card is installed into the modem.

•

The modem is inserted into the router.

•

The Ethernet cable is connected properly.

•

The power light is on.

•

The PPP light is on.

It is suggested that you use one of these web browsers to connect to the internet.

Internet Access

Web browser requirement:

•

IE 6.0 or above

•

Firefox 2.0

•

Netscape version 9.0

Do not change any setti

ngs unless instructed by your service provider. To make changes to

your settings you need to disconnect the router from the network. After making changes

reboot your router by turn off and on again.

The router can be

connected by RJ45 or by Wi

Fi (the SSID is “ZTE Wireless Network”). By

either connection mode, you should set to obtain an IP address automatically in the attribution

setting of Internet protocol

(TCP/IP).

After your computer gets the IP address (like 192

.168.0.101) from the router, open a web

browser and type “http://192.168.0.1” in the address bar, and then input the username and

password to log in.

Click

to log in the router. Check

to let the Explorer keep t

he user name and

password.

When you successfully login, the router status web page appears:

Settings

User Name

admin

Password

admin

Save

The whole page is divided into two parts. Related functions can be executed by operation in

the related areas.

•

: Show configuration list for your rout

er.

•

: Show the detail configuration.

Click

, you can set up your gateway in the safe way. Click

button to show

following figure:

Click

button

Index area

Content area

Quick Setup

Quick setup

Click

button.

Click

button.

Andere Handbücher für MF10

Inhaltsverzeichnis

Andere Zte Netzwerk-Router Handbücher

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise