Zte R218 Bedienungsanleitung

R218

Quick Start Guide

ZTE CORPORATION

ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park,

NanshanDistrict,Shenzhen,Guangdong,518057, P.R.China

Getting to Know Your Device

Appearance

The following figure is for your reference only.

1. Charging/micro-USB jack

2. Indicator light

3. Power key

Press and hold for about 3 seconds to power on/off your

device.

Press and hold for about 10 seconds to restart your

device.

5. WPS key

Press and hold for 3 seconds to activate the WPS function.

6. micro-SIM card slot and reset hole

Getting to Know Your Device

Indicator lights

Indicator Status Description

Battery

Red solid /

blinking The battery is low. Please

charge the battery.

Green

blinking The battery is being

charged.

Green

solid The battery level is middle

or high.

Light off Your device is not being

charged.

Wi-Fi

Blue solid Wi-Fi is active.

Blue

blinking WPS is active.

Light off Wi-Fi is off.

SMS

Blue solid You have unread messages.

Blue

blinking You have new messages.

Light off There is no unread

message or new message.

Network

Red Error status. Not registered

to the mobile network, no

micro-SIM card inserted or

no network service

available.

Green

solid Registered to the 2G/3G

mobile network.

Green

blinking Connected to the 2G/3G

mobile network and data is

being transferred.

Blue solid Registered to the 4G LTE

network.

Blue

blinking Connected to the 4G LTE

network and data is being

transferred.

Getting to Know Your Device

Connection Scenarios

The device allows multiple clients to surf on the Internet at the

same time. The following figure is for your reference only.

A micro-SIM card can be used to access the Internet.

Installin

1. Open the mi

NOTE:

Do not remove

device.

2. Install a mic

WARNING

Your device do

other non-stan

device, do not

3. Close the

Your Devi

cro-SIM card cover.

the cover rudely, be

o-SIM card to the m

es not support SIM

dard micro-SIM car

se those cards or a

icro-SIM card cove

ause it is connecte

icro-SIM card slot.

ards, nano-SIM car

s. To avoid dama

ny card holders.

with the

s or any

e to the

Connec

Using Wi-

1. Power on y

2. Ensure tha

enabled Wi-

NOTE: Re

further details

use a comput

address autom

3. Select the

Connect.

4. Enter the W

NOTE: Re

SSID and P

password.

5. Wait until t

successfully

Using a U

1. Connect a c

2. Power on

identifies n

software.

ing to Your

ur device.

your computer o

Fi, and search for a

fer to your Wi-Fi-en

on how to search f

r, you need to set y

atically.

Wi-Fi name (SSID

)

-Fi password if nec

er to the chapter

ssword to get th

he client device is

B Cable

mputer to your dev

our device. The o

w hardware, and

Device

other client devic

ailable wireless net

bled client device m

r wireless networks

ur computer to obt

)

of your device,

ssary, and click OK.

etting to Know t

e default Wi-Fi S

connected to you

ce with a USB cabl

erating system det

automatically ins

es have

orks.

nual for

. If you

in an IP

nd click

e Wi-Fi

ID and

r device

cts and

alls the

NOTE:

If the system d

double-click t

install the soft

3. Wait until

successfully

Getting

Passwo

You can view

SSID and pas

Logging

Hotspot

1. Ensure that

client devic

2. Launch the

http:/

ufi.zt

3. Enter the

configuratio

NOTE:Th

oes not automaticall

e device installatio

are.

the computer is

o Know th

the label on the de

word.

in to t

Configurati

the connection be

is correct.

Internet browser an

device.com in the

assword to log in

page.

default password i

launch installation,

icon in My Com

connected to you

Wi-Fi SSI

ice to get the defa

e 4G M

on Page

tween your device

enter http://192.1

ddress bar.

to the 4G Mobile

admin.

you can

pute

device

and

ult Wi-Fi

obile

and the

8.0.1 or

Hotspot

Changing the Wi-Fi SSID or

Password

1. Log in to the 4G Mobile Hotspot configuration page.

2. Select Wi-Fi Settings.

3. Change the Network Name (SSID) or the Password in the

Main SSID area.

4. Click Apply.

Accessing the Internet

After a client device is successfully connected to your device,

you can access the Internet in Automatic or Manual mode. The

default mode is Automatic.

Mode Operation

Automatic Your device is automatically connected to the

Internet, and you can surf on the Internet

through the client.

Manual 1. Log in to the 4G Mobile Hotspot

configuration page.

2. In My router section, select LTE (or other

network type) Settings > Connection

Mode > Manual, and then click Apply.

3. Click to return to the home page,

and then click or .

NOTE:

• To change current connection setting, please disconnect

from network.

• To modify the parameters of your device, log in to the 4G

Mobile Hotspot configuration page.

Configuring Your PC

The following procedure describes how to configure the Internet

Protocol in Windows 7 for your Wi-Fi connection.

1. Right-click Network and select Properties.

2. Select Change adapter settings.

3. Right-click Wireless Network Connection and select

Properties.

4. Select Internet Protocol Version 4 (TCP/IPv4),and click

Properties.

5. Select Obtain an IP address automatically and Obtain

DNS server address automatically, and click OK.

Inhaltsverzeichnis

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung