ZUMEX Versatile Pro Konfigurationshandbuch
Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com
Cleaning Instructions For a correct cleaning process, please follow the instructions below.
Caution! Before getting started, make sure that the machine is
unplugged from general switch.
Remove the feeder plate by unscrewing the
central knob.
Then clean the feeder base with a wet cloth.
Assemble the blade protector and then
remove the blade by pulling the handle
towards you.
Remove the front cover.
Remove the juice tray.
Clean the front part of the machine with a
soft sponge.
Unscrew the central knob of the 1Step
Extraction Kit.
Remove the anti drop tray and the filter.
Remove out the filter.
Remove the peel buckets.
Remove the tap pressing softly both sides.
Remove the 1Step Extraction Kit by pulling
it towards you with the stainless-steel
handles.
In case of podium models, clean the hopper
with a soft sponge.
Once all the parts have been disassembled,
proceed to deep cleaning.
Take out the waste bin and clean inside the
podium, making sure that there is no rest of
pulp and peels.
The cleaning process will be explained in details for each one of the machine’s components below.
Replacing parts.
For quick cleaning in the middle of
the day, we recommend having a kit
with spare parts. This Kit is made up
of: a cover, 1Step Extraction Kit, Juice
container and Filter.
13 14
1
7
4
10
2
8
5
11
3
9
6
12
Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com
All the parts, except from the cover and the tap can be
put in a dishwasher to clean them. Furthermore, if you
have Silver or Graphite models do not put peel buckets as
well.
Cleaning of the extraction area and any of its removable
parts must be done with a sponge. Do not use scouring
sponges that could scratch the surfaces.
Use a degreaser product for food use to be able to
easily remove all traces of pulp and adhering wax. It is
necessary to sanitize with a disinfectant product after
each cleaning.
Rinse with plenty of water after sanitizing, in order to
remove any remaining disinfectant.
Cleaning instructions for components
Cleanliness and hygiene warnings.
Zumex recommends cleaning the machine at least once or twice a day, depending on how
much it is used in order to maintain optimal food hygiene conditions.
!
Blade, tap, juice container, filter, drip tray, feeder
plate and front cover
1Step Extraction Kit
Daily cleaning
Clean piece by piece, by hand or in the
dishwasher.
*Check the recommendations regarding parts
that can be washed in the dishwasher (pag. 2)
Clean the feeding plate in the dishwasher or
with a soft sponge to remove the remaining
particles still stuck to it.
Clean the entire assembly with a spon-
ge and soap in a single piece under a tap.
Move the pressing units around to make
sure that they are completely clean.
Clean the cover with a soft sponge to avoid
damaging the material. Rinse with plenty of
water.
The assembly can also be washed in a
single piece in a dishwasher.
For a quick cleaning, clean the
1Step Extraction Kit assembled
in a single piece under a tap or
in a dishwasher.
1 2 3
1 2
Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com
Clean piece by piece, by hand or in the
dishwasher.
*Check the recommendations regarding parts
that can be washed in the dishwasher (pag. 2)
Recommended cleaning instructions
Cover, 1Step Extraction Kit, Juice container, filter and tap
Midday Cleaning
Remove the juice container and the cover. Remove 1Step Extraction kit and the blade.
Recommended cleaning instructions
1Step Extraction Kit
Weekly cleaning
Lift the stainless-steel handles.
For deep cleaning, disassemble
the 1Step Extraction Kit and
clean all the parts
Remove the pressing units.
Remove the peel ejectors located on the
sides at the bottom.
Clean all the parts with a sponge and soap,
rinse after with clean water. All the parts
can also be washed in a dishwasher.
Unscrew the knob located on the lower
central part.
!
1 2 3
53
1
4
2
Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected]. Zumex Service Tel: +34 960 800 999. www.zumex.com
Assembly Instructions
Assemble the tap.Insert the juice tray and the filter.
¡Caution! Remove the blade protector
before inserting the kit.
Insert the blade pressing towards the
machine until notice the clip sound.
Place the peel buckets towards the
machine until notice the bucket is in their
position.
Assemble the juice container and the filter
together.
Insert the feeder plate by screwing the
central knob.
Screw the central know of the 1Step
Extraction Kit.
Screw the central know of the 1Step
Extraction Kit.
Assemble the front cover.
2
5
8
1
4
7
3
6
9
10
Andere Handbücher für Versatile Pro
1
Inhaltsverzeichnis
Andere ZUMEX Entsafter Handbücher
ZUMEX
ZUMEX Speed Pro Bedienungsanleitung
ZUMEX
ZUMEX ESSENTIAL PRO Bedienungsanleitung
ZUMEX
ZUMEX Soul 2 Series Bedienungsanleitung
ZUMEX
ZUMEX MINEX Bedienungsanleitung
ZUMEX
ZUMEX MINEX Bedienungsanleitung
ZUMEX
ZUMEX Speed S+ Bedienungsanleitung
ZUMEX
ZUMEX Multifruit Bedienungsanleitung
ZUMEX
ZUMEX Speed Up Montageanleitung
ZUMEX
ZUMEX Multifruit Bedienungsanleitung
ZUMEX
ZUMEX Speed Pomegranates Bedienungsanleitung
ZUMEX
ZUMEX ZUMEX SPEED Bedienungsanleitung
ZUMEX
ZUMEX Versatile Pro Cashless Bedienungsanleitung
ZUMEX
ZUMEX essential Bedienungsanleitung
ZUMEX
ZUMEX ESSENTIAL PRO Konfigurationshandbuch
ZUMEX
ZUMEX Multifruit Bedienungsanleitung
ZUMEX
ZUMEX PUSH&JUICE Bedienungsanleitung
ZUMEX
ZUMEX MINEX Bedienungsanleitung
ZUMEX
ZUMEX PUSH&JUICE Soul Bedienungsanleitung
ZUMEX
ZUMEX Zumex Bedienungsanleitung
ZUMEX
ZUMEX MINEX Bedienungsanleitung
