ZyXEL Communications AG-220 Bedienungsanleitung

AG-220

802.11a/g Wireless USB Adapter

Quick Start Guide

Version 1.10

Edition 1

5/2008

Table of Contents

ENGLISH 3

DEUTSCH 17

ESPAÑOL 33

FRANÇAIS 47

ITALIANO 61

РУССКИЙ 75

SVENSKA 89

繁體中文 103

ENGLISH

About Your AG-220

The AG-220 is a wireless network adapter for your desktop or

notebook computer. It plugs into your computer’s USB port

and allows you to access available wireless networks.

Use Wi-Fi Protected Setup (WPS) to connect to other WPS-

enabled devices in a few steps. WPS allows you to set up a

secure wireless network at the press of a button (Windows

Vista).

Installation Requirements

Before installation, make sure you have a computer with the

following:

• Pentium II 300 MHz or above

• A USB port (with USB 2.0/1.1 the AG-220 can transmit at up

to only 11 Mbps)

• A minimum of 20 MB available hard disk space

• A minimum of 32 MB RAM

• A CD-ROM drive

• Windows 98 Second Edition (SE), Windows ME, Windows

2000, Windows XP or Windows Vista

• Windows 98 SE users may need the Windows 98 SE CD.

If you have already installed Funk Odyssey Client

software on the computer, uninstall (remove) it.

ENGLISH

ZyXEL Utility Installation

The installation procedures are similar for all supported

Windows versions.

1Insert the included CD into the CD-ROM drive on your

computer. When the following screen displays, click

Setup. If the screen does not display, locate and double-

click autorun.exe.

2Select your language and click OK.

Install the ZyXEL utility before you insert the AG-

220.

ENGLISH

3The following screen displays. Click Next.

4Select Driver and Utility to install both ZyXEL utility and

driver on your computer. If you want to install the driver

only and use Wireless Zero Configuration (WZC) with

Windows XP, select Driver only (see Note for Windows XP

Users). Click Next to accept the default file location or

click Browse to select an alternate folder.

ENGLISH

5You must restart your computer before using the ZyXEL

utility. Save your work and close any open programs

before restarting. Click Finish to complete the installation.

Hardware Connections

1Locate an available USB port on the computer.

2Remove the protective cap

to expose the USB

connector. Insert the AG-

220 into an available USB

port on the computer. The

AG-220’s LINK light turns

on if it is properly inserted.

Never bend, twist or force the AG-220 into the port.

If there is not enough space to attach the AG-220,

use the included USB cable.

ENGLISH

ZyXEL Utility Icons

After you install the ZyXEL utility and insert the AG-

220, an icon appears in the system tray (typically at

the bottom of the desktop). The AG-220 automatically

searches for any available network(s) and connects to a

wireless network without security enabled.

If the icon color is green and/or you see the following icon

on your desktop, you are already connected to a wireless

network.

To access the Internet, open your Internet browser and enter

the URL of a web site in the address bar.

If the icon color is red, you are not connected to a

wireless network. See the next section for details on

how to manually connect to a network.

Manual Network Connection

If your AG-220 does not automatically connect to a wireless

network, you can use the ZyXEL utility to connect manually.

ENGLISH

1Double-click the icon to display the ZyXEL utility Link Info

screen.

2Click the Site Survey tab.

3The available wireless network(s) displays in the

Available Network List. You can click Scan to have the

AG-220 search again.

ENGLISH

If a wireless network without security is available, one of the

following icons appears next to an entry in the list.

If a wireless network with security is available, one of the

following icons appears next to an entry in the list.

4To connect to an available network, double-click an entry.

If the network has security enabled, you need to know its

settings. Refer to the User’s Guide for how to configure

security settings.

If no entries appear in the list, there are no available wireless

networks within range. See Troubleshooting or the User’s

Guide for more information.

Connect to a Wireless Network Using

WPS (Windows Vista)

You can use Wi-Fi Protected Setup (WPS) to add your

computer to a wireless network.

The AG-220 supports two WPS methods for creating a secure

connection:

ENGLISH

•Push Button Configuration (recommended) - create a

secure wireless network simply by clicking a button.

•PIN Configuration - create a secure wireless network by

entering the AG-220’s PIN (Personal Identification Number)

into the configuration screen of an Access Point (AP).

Push Button Configuration

1Make sure that your wireless AP (Access Point) is turned

on and that it is within range of your computer.

2In the Adapter screen, select WPS (Wi-Fi Protected

Setup) and PBC (Push Button Configuration).

3Click Start.

4Press the WPS button on your wireless AP (ZyXEL’s

NWA570N is shown as an example). It doesn’t matter

Andere Handbücher für AG-220

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications AG-225H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-271N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD210N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-160 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR B-320 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-210H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-225H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1100P Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-407 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FN312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1000 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications OMNI LAN PCI G1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N220 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-271N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WPA-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications OMNIMPRI Gebrauchsanweisung

ZyXEL Communications

ZyXEL Communications WPA-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 v2 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications NWD217N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WPA-1000 Handbuch

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-271N - Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung