ZyXEL Communications PLA5215 Bedienungsanleitung

Extend the Home

Network Coverage by

using Powerline Adapter

and Home Router

Background

These days, the Internet is an integral part of our lives. We use laptops,

cell phones or iPads to surf the Internet and communicate with our

friends via Facebook, Twitter etc. We can communicate from anywhere

in our house.

For good signal coverage in our houses, we would need to extend the

wireless signal or wired network. We often extend the range of the

network using a router of AP.

If the range is too large, we would have to lay out a significant amount

of RJ-45 cable. This may cause an inconvenience in our lives.

Now, if there is a house that has 3 floors, but only the ground floor has

the network. How can we reduce the cumbersome network wires

without affecting the range and quality of the network on al floors?

The following example demonstrates this scenario.

Topology

First Floor

Second Floor

Internet

Third Floor

Ethernet

Power circuit

Wall

PLA4231

PLA5215

PLA5215

Storage

NBG6503

Device and Firmware Information

1. NBG6503, v1.00(AAJN.0)C0

2. PLA5215

3. PLA4231, v1.00(AAGV.0)C0

Configuration Procedure

1. Connect the PC to the LAN port of the NBG6503.

2. Access the NBG6503 via web Internet interface with default

address http://192.168.1.1 from LAN.

3. Chose the third icon on the left-hand side of the navigator

section for “Network”configuration. Then, select the “WAN”

function to Setup the PPPoE account and password.

The exact pathway of the selection would be “Configuration >

Network > WAN”and select “ISP Parameters for Internal Access”

as PPPoE. Fill-in your account and password, and then click on

the “Apply” button.

4. Setup your Wi-Fi sharing to service the first floor.

Go to “Configuration > Network > Wireless LAN 2.4/5G”, and

setup your SSID and password as would like it to be.

5. Check the NBG6503’s status to make sure the network is

successfully configured.

6. After the setup procedure of the NBG6503 is complete, plug-in

the PLA5215 into the socket, and use a cable to connect to

connect to the NBG6503.

7. Make the PLA4231 and PLA5215 sync. You can use hardware

button “Encrypt Key”to sync both.

Press both buttons for around 0.5-2 seconds. You will notice that

both of the HomePlug LEDs start to blink until they become

steadily. This means that the network as connected successfully.

PLA4231

PLA5215

1

8. Login to PLA4231’s web interface via http://192.168.1.2.

9. Configure the PLA4231’s SSID via

“Configuration > Network > Wireless LAN”.

10. Check the status to see that the setup was successful.

Andere Handbücher für PLA5215

1

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications PowerLine PL-100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-302 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA6457 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD3105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PowerLine PL-100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-405 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 2002 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SHD5110 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1000 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-225H V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD6505 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1000 Series Handbuch

ZyXEL Communications

ZyXEL Communications omni.net D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WPA-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-4xx Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-220 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications WPA-1000 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung