ZyXEL Communications WPA-1000 Bedienungsanleitung

WPA-1000

802.11g Wireless Projector Adapter

Quick Start Guide

Version 1.00

3/2007

Edition 1

WPA-1000 Quick Start Guide

Overview

The WPA-1000 allows meeting participants to access and share one projector via wireless

connection to the WPA-1000, as shown in the application diagram below. IEEE 802.11b/g

standards are supported and connections are secured with WEP security.

This Quick Start Guide shows how to connect to the WPA-1000 with an Ethernet cable in

order to set it up and secure the wireless connection. (If the wireless connection is not

secure, people in adjacent rooms may be able to view your presentation.) It also shows

how meeting participants can connect wirelessly to the WPA-1000 and use the WPA-1000

to display their presentation.

See your User’s Guide on the CD in the package for more information on all features.

To read the User’s Guide, insert the CD that came in the box into your CD-ROM drive. A

screen should pop up. Navigate to the User’s Guide from this screen. If a screen does not

pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually

drive D:) and navigate to it from there.

Setup Overview

1Hardware connections

2The standby screen

3Configuring wireless security

4Connecting wirelessly to the WPA-1000

5Installation of the WPA-1000 utility

6Projecting

System Requirements

• minimum 256 Mb RAM

WPA-1000 Quick Start Guide

• Windows XP Professional or Windows 2000

1 Hardware Connections

1Use the power adapter from the package to connect your WPA-1000’s power socket to

a power source.

2Connect the projector to the WPA-1000's VGA socket with the grey VGA cable from the

package.

3Connect your computer to the LAN port using the red LAN cable from the package.

4Press the ON/OFF button in to turn your device on.

VI cannot start my WPA-1000

• Check the POWER is turned on.

• Check the WPA-1000 is connected to a power source.

• Restart your device.

5Look at the LEDs (lights).

•TheSTATUS LED shows orange while the WPA-1000 is starting up, and green when it is

ready.

•TheLAN LED blinks while sending/receiving data, then shows a steady green when it has

a successful connection.

VI cannot make a LAN connection to the WPA-1000.

• Check the cables are connected properly and you are using the red Ethernet cable that

came in the package. If the cable is different, check it is an auto-crossover Ethernet cable.

WPA-1000 Quick Start Guide

• Check your computer is set to obtain IP addresses automatically. See the User’s Guide for

details on how to check this setting.

2 The Standby Screen

If the standby screen shown below appears on your projector screen, your WPA-1000 is

successfully connected to the projector.

VMy WPA-1000 cannot connect to a projector. The standby screen does not

appear.

• Check the projector is turned on and working properly.

• Check your grey VGA cable is securely attached to the WPA-1000 and to the projector.

"Write down the Server IP on the screen for use when connecting to the

web configurator.

3 Configuring Wireless Security on the WPA-1000

It is important to set up security on your wireless network before meeting participants

connect wirelessly.

LABEL VALUE

Server IP

WPA-1000 Quick Start Guide

1Open an Internet browser such as Internet Explorer on your computer.

2Type the Server IP address displayed on the standby screen in the web address field

of your Internet browser (the default IP address is 192.168.1.10). Press [ENTER].

3Click Administrator in the screen below.

4Type your user name and password in the screen below to access the administrator

screens.

Default Login Information

5Go to Network > Wireless to configure your wireless settings.

6Select AP Mode (default).

user name admin

password admin

WPA-1000 Quick Start Guide

7Set the ESSID that you want every user to see when they scan for available wireless

devices. The ESSID identifies a wireless network. The ESSID is WPA-1000 by default.

8Type a Key in the screen. Make sure the key is the correct length and type of character

according to the type of Key you choose.

• An ASCII key is made from alphanumeric characters only.

• A hexadecimal key is made from digits and letters from A to F.

"Write down the WEP Key for use when meeting participants connect to the

WPA-1000’s network.

9Click Send.

10 Click Reboot to restart your WPA-1000.

VI cannot set up wireless security.

• Check you have entered a key with the correct length and the correct character. For

example, if you select 128 bit ASCII security, your key must be 13 characters long, made

from alphanumeric characters.

WPA-1000 Quick Start Guide

4 Connecting Wirelessly to the WPA-1000

After configuring wireless security, meeting participants can now connect securely to the

WPA-1000’s wireless network.

When the WPA-1000 restarts, check the standby screen displayed on the projection

screen. To connect to the WPA-1000, participants must use the same ESSID, channel and

security settings as the WPA-1000.

Write down the following details for use when connecting wirelessly to the WPA-1000 and

using the WPA-1000 utility.

"The Login Code changes each time the WPA-1000 is started.

1Start your wireless adapter management utility on your computer. Go to Start >

Programs, and then click on the name of your wireless adapter management utility.

2Use your wireless adapter management utility to scan the available wireless networks

for your WPA-1000’s network ID (ESSID). The default is ZyXEL. Check the standby

screen on the projector for your device’s ESSID.

3Connect to this network.

4Type the Key when prompted. This is the key you entered when you set up wireless

security in the previous section.

5Select the Channel if prompted.

6Check the WLAN LED on your device (see figure 2 on page 2).

• If it shows green the WPA-1000 has a successful wireless connection.

• If it is green and blinks it is sending /receiving data.

• If it is off, your device has no wireless connection.

7Use the login code and device name from the standby screen and begin projection.

LABEL VALUE

Channel

Device Name

ESSID

Server IP

WPA-1000 Quick Start Guide

VI cannot find my network.

• Check the WPA-1000’s correct ESSID on the projector standby screen.

• Scan the available wireless networks again with your wireless adapter management utility.

VI cannot connect to my network

• Check you have set the same ESSID, channel, encryption type (WEP) and Key as the

WPA-1000 on your computer.

5 Installing the WPA-1000 Utility

The WPA-1000 utility allows meeting participants to display presentations on the projector via

the WPA-1000. Follow the instructions below to download and install the WPA-1000 utility on

your computer (or use the CD included in the package).

1Open an Internet browser such as Internet Explorer on your computer.

2Type the Server IP address displayed on the standby screen in the web address field

of your Internet browser (the default IP address is 192.168.1.10). Press [ENTER].

3Click Download in the screen below to download the WPA-1000 utility file and save it

to a location on your computer.

WPA-1000 Quick Start Guide

4After it finishes downloading, double-click the file to begin the installation wizard.

Follow the directions to install the utility.

5After installation completes, a shortcut ( ) appears on your desktop.

6Restart your computer if prompted.

VI cannot download the WPA-1000 utility from the WPA-1000 using my web

browser.

1Insert the CD that came in the package into your CD-ROM.

2Click Setup, or find the setup file in the directory of your CD-ROM and then double-

click it.

3Follow the directions for installing the utility.

6 Projecting Presentations via the WPA-1000

Follow the directions below to begin projecting.

1Double-click the shortcut ( ) on your desktop or click Start > Programs > WPA-

1000 to start the WPA-1000 utility. A control panel appears.

2Press the play button ( ).

3The WPA-1000 utility searches for available projectors. Choose the projector with the

Device Name shown in the standby screen.

WPA-1000 Quick Start Guide

4Type the Login Code that appeared in the standby screen. Then press [ENTER]. .

5The projector displays the content on your computer monitor. The PLAY LED blinks

when your WPA-1000 is successfully projecting.

6Control your presentation using the WPA-1000 utility’s functions described below.

VThe projection is unclear.

1Click Refresh in the WPA-1000 utility.

2Check the resolution settings on your computer graphics settings. The projection is best

viewed at 1024 * 768.

VI cannot use the WPA-1000 utility to project my presentation.

1Uninstall the WPA-1000 utility and reinstall it.

BUTTON DESCRIPTION

A (Play) Use this button to search for available projectors and to

project content from your computer after one has been

selected.

B (Stop) Use this button to stop projection.

C (Search) Use this button to search for available projector(s).

D (Help) Use this button to open the help file.

E (Refresh) Use this button to refresh the current projection screen.

F (Minimize) Use this buttonto minimize this utility to the system tray at the

bottom right of your screen.

G (Exit) Use this button to close and exit the utility.

ABCD

Andere Handbücher für WPA-1000

Inhaltsverzeichnis

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications PLA-4xx Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD210N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GN650-T Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-225H V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-402 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-120 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-470 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD6505 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-400 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N220 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-320H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Omni TA128 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-405 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4211 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-211AN - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-200 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung