ZyXEL Communications ZyAIR G-200 Bedienungsanleitung

ZyAIR G-200

Wireless LAN USB Adapter

Quick Installation Guide

Version 1.00

December 2003

Procedure to View a Product’s Certification(s)

1. Go to www.zyxel.com

2. Select your product from the drop-down list box on the ZyXEL home page to go

to that product's page.

3. Select the certification you wish to view from this page.

1. Installation Requirements

Before installation, make sure you have the following requirements.

• Pentium II 300MHz or above

• A minimum of 6 MB available hard disk space

• A minimum of 32 MB RAM

• A CD-ROM drive

• A computer with an available USB port

• Windows 2000/XP

2. ZyAIR Utility and Hardware Installation

The installation procedures are similar for all supported Windows versions.

Windows XP screen shots are shown unless otherwise specified.

DO NOT connect the ZyAIR at this point.

1. Insert the support CD into the CD-ROM drive on your computer. The CD

auto runs. Otherwise, locate and double-click on setup.exe.

A Welcome screen displays. Click Next.

2. Click Next to accept the default file location or click Browse to select an

alternate folder.

3. Click Finish to restart the computer.

4. With a USB cable, connect the ZyAIR to an available USB port on the

computer. The PWR LED turns on if the ZyAIR is properly connected.

5. Windows 2000: If a warning window displays, click Yes.

6. Windows XP: A Found New Hardware Wizard windows displays. Select

Install the software automatically (recommended) and click Next.

7. Windows XP: If a warning window displays, click Continue Anyway.

Then click Finish to complete the installation process.

After you install the ZyAIR Utility and connect the ZyAIR, an icon

appears in the system tray.

If the ZyAIR Utility icon displays, the ZyAIR is installed

properly. Refer to the User’s Guide to configure the ZyAIR.

LED Display

The following table describes the LEDs on the ZyAIR.

LED COLOR STATUS DESCRIPTION

On The ZyAIR is receiving power.PWR Green

Off The ZyAIR is not receiving power.

On The ZyAIR has a connection to a wireless LAN.

Blinking The ZyAIR is receiving or sending data.

LINK Green

Off The ZyAIR is not connected to a wireless LAN.

PWR LED LINK LED

Troubleshooting

PROBLEM CORRECTIVE ACTION

Make sure the ZyAIR is connected to the computer USB port

properly and then restart your computer. Check the LEDs on

the ZyAIR.

Perform a hardware scan by clicking Start, Settings, Control

Panel and double-clicking Add/Remove Hardware. (Steps

may vary depending on the version of Windows).

Follow the on-screen instructions to search for the ZyAIR and

install the driver.

Check for possible hardware conflicts. In Windows, click Start,

Settings, Control Panel, System, Hardware and then click

Device Manager. Verify the status of the ZyAIR under Network

Adapter. (Steps may vary depending on the version of

Windows).

Reinstall the driver/utility.

Windows does not

auto-detect the

ZyAIR.

Install the ZyAIR in another computer. If the error persists, you

may have a hardware problem. In this case, you should contact

your local vendor.

Andere Handbücher für ZyAIR G-200

Inhaltsverzeichnis

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications NWD210N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-302 V3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N220 - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications M-202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-270S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WPA-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Wireless LAN USB Adapter ZyAIR 200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-225H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD7605 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR G-260 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-210H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-320H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-102 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1000 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-220 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications ZyAIR G-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-202 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-270N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5456 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA450 Series Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung