ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyAIR B-220

11M Wireless LAN USB Adapter

Quick Installation Guide

Version 2.00

September 2003

About Your ZyAIR

The ZyAIR is an IEEE 802.11b compliant wireless USB adapter that connects to

USB ports on desktop or notebook computers. Its maximum 11 Mbps data rate,

which gives Ethernet equivalent speed, is ideal in the corporate or home

environment. Users enjoy the wireless mobility within the coverage area.

Installation Overview

1. Installation Requirements

2. ZyAIR Utility and Hardware Installation

3. Disable Windows XP Configuration Tool

4. Accessing the ZyAIR Utility

Installation Requirements

Before installation, make sure you have the following requirements.

• Pentium II 300MHz or above

• A minimum of 6 MB available hard disk space

• A minimum of 32 MB RAM

• A CD-ROM drive

• A USB port (version 1.1 compatible)

• Windows 98 SE/Me/2000/XP

• Windows 98 SE users may need the Windows 98 SE CD

ZyAIR Utility and Hardware Installation

The installation procedures are similar for all supported Windows versions.

Windows XP screen shots are shown unless otherwise specified.

DO NOT insert the ZyAIR at this point.

1. Insert the support CD

into the CD-ROM

drive on your

computer. The CD

auto runs. Otherwise,

locate and double-click

on setup.exe.

A Welcome screen

displays. Click Next.

2. Click Next to accept

the default file location

or click Browse to

select an alternate

folder.

3. Windows 2000/XP:

Click Finish to

complete the

installation.

Windows 98 SE/Me:

Click Finish to restart

the computer.

4. Locate an available USB port on the

computer.

5. Remove the protective cap to expose

the USB connector. Insert the ZyAIR

to the USB port on the computer.

Never bend, force or twist

the ZyAIR into the port.

When the USB connector of the ZyAIR is properly inserted

into the computer USB port, the LED blinks.

Disable Windows XP Configuration Tool

Windows XP includes a basic configuration tool for wireless devices.

DO NOT use the configuration tool together with the ZyAIR

Utility program. It is recommended you use the ZyAIR Utility

program to configure the ZyAIR.

Follow the steps below to disable the configuration tool in Windows XP.

1. Double-click the network icon for

wireless connection in the system

tray.

2. When a Connect to Wireless

Network window displays, click

Advanced….

3. In the Wireless Network

Connection Properties window,

make sure the Use Windows to

configure my wireless network

settings check box is not selected.

Click OK.

Accessing the ZyAIR Utility

1. After you install the ZyAIR Utility, an icon

appears in the system tray.

If the ZyAIR Utility icon displays, the ZyAIR is installed

properly.

2. Click on the ZyAIR Wireless LAN Utility icon in the system tray to open

the ZyAIR Wireless LAN Utility program.

3. Refer to the ZyAIR User’s Guide to configure the ZyAIR using the ZyAIR

Utility.

Front Panel LED

The following table describes the LED on the front panel of the ZyAIR.

ZyAIR LED

COLOR STATUS DESCRIPTION

On The ZyAIR has a successful connection to an access point.

Blink (fast) The ZyAIR is sending or receiving data.

Blue

Blink (slow) The ZyAIR is ready but not connected to an access point.

Troubleshooting

PROBLEM CORRECTIVE ACTION

Make sure the ZyAIR USB connecter is inserted into the

computer USB port properly and then restart your computer.

Check the LED on the ZyAIR.

Perform a hardware scan by clicking Start, Settings, Control

Panel and double-clicking Add/Remove Hardware. (Steps

may vary depending on the version of Windows).

Follow the on-screen instructions to search for the ZyAIR and

install the driver.

Use the Device Manager window to check for possible

hardware conflicts.

Click Start, Settings, Control Panel, System, Hardware and

then click Device Manager. Verify the status of the ZyAIR

under Network Adapter. (Steps may vary depending on the

version of Windows).

Windows does not

auto-detect the

ZyAIR.

Install the ZyAIR in another computer.

PROBLEM CORRECTIVE ACTION

If the error persists, you may have a hardware problem. In this

case, you should contact your local vendor.

Make sure the ZyAIR is properly inserted and the LED blinks.

Use Device Manager to check for possible hardware conflicts.

Click Start, Settings, Control Panel, System, Hardware and

then click Device Manager. Verify the status of the ZyAIR

under Network Adapter. (Steps may vary depending on the

version of Windows).

Install the ZyAIR in another computer.

Cannot start the

ZyAIR Wireless

LAN Utility.

If the error persists, you may have a hardware problem. In this

case, you should contact your local vendor.

The ZyAIR

Wireless LAN

Utility displays

only three tabs.

When the ZyAIR Wireless LAN Utility displays only three tabs,

you are using the Windows XP wireless configuration tool at the

same time. Refer to the Disable Windows XP Configuration

Tool section to disable the Windows XP wireless configuration

tool.

Andere Handbücher für ZyXEL ZyAIR B-220

Inhaltsverzeichnis

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications NWD2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD2205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD2705 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4201 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-271N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GN600 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-100 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1000W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Wireless LAN USB Adapter ZyAIR 200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications omni.net LCD+M Gebrauchs- und Pflegehandbuch

ZyXEL Communications

ZyXEL Communications G-220 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N220 - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5215 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-162 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FN-300 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5215 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-320H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220F Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung