ZyXEL Communications ZyXEL ZyAIR B-400 Bedienungsanleitung

ZyAIR B-400

11Mbps Wireless LAN

Ethernet Adapter

Quick Installation Guide

ZyAIR B-400 Quick Installation Guide

—

FCC Warning

The ZyAIR B-400 has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that changes or modifications not expressly

approved by the party responsible for compliance could void your

authority to operate the equipment.

FCC Radiation Exposure Statement

The ZyAIR B-400 complies with FCC radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed

and operated with minimum distance 20cm between the radiator &

your body. This equipment must not be co-located or operating in

conjunction with any other antenna or transmitter.

CE Marking Warning

This is a Class B product. In a domestic environment this product may

cause radio interference in which case the user may be required to

take adequate measures.

ZyAIR B-400 Quick Installation Guide

—

Table of Contents

ZYAIR B-400 FEATURES .................................... 4

PACKAGE CONTENTS ........................................ 5

PHYSICAL DETAILS ........................................... 6

HARDWARE INSTALLATION ............................ 8

WIRELESS NAVIGATOR INSTALLATION ....... 9

STARTUP AND LOGIN ...................................... 13

FAQ AND TROUBLESHOOTING..................... 16

ZyAIR B-400 Quick Installation Guide

—

ZyAIR B-400 Features

LAN Features

 DHCP Support – Enable the adapter to act as a DHCP client to

receive an IP address from a DHCP Server in the wired

Ethernet LAN

 Built-in 10BaseT LAN Port – Designed to connect the adapter

with any Ethernet-ready device, such as a desktop PC, print

server and network printer/scanner.

Wireless Features

 Standard Compliant – The adapter complies with the

IEEE802.11b standard, and it is interoperable with

IEEE802.11b-Compliant Equipment

 High speed Wireless Connection – Supports up to 11Mbps

wireless data rate

 Data Rate Auto Fall-Back - Provides 11, 5.5, 2 and 1Mbps

wireless data rates. Shifts dynamically to guarantee the

availability and reliability of wireless connections.

 Roaming – Provides seamless roaming within the IEEE802.11b

wireless LAN infrastructure

Configuration & Management

 Easy to Setup - With the Windows-based Wireless Navigator

Utility, users can easily setup the IP address of the adapter, and

upgrade the firmware.

 Easy to Manage – The adapter can be easily configured using

any WEB browser from anywhere on the wired or wireless LAN.

Security

 Configuring Protection – Provides password protection to

prevent unauthorized users from changing the configuration.

 Wireless LAN Security - Provides 64-bit & 128-bit Wired

Equivalent Privacy (WEP) encryption to protect the wireless

data transmissions.

ZyAIR B-400 Quick Installation Guide

—

Package Contents

 One ZyAIR B-400 11Mbps Wireless LAN Ethernet adapter

 One installation CD-ROM (Wireless Navigator Utility & User’s

Manual Included)

 One power adapter

 One quick installation guide

If any of the above items are damaged or missing, please contact your

dealer immediately.

ZyAIR B-400 Quick Installation Guide

—

Physical Details

Rear Panel

INIT Button “INIT” means “Initialize”. Pressing the button will

reboot the device and restore the settings to the

factory default settings.

LAN Cable

Selection Switch

X: Crossover: the RJ-45 port Tx and Rx lines are reversed. Use

this setting when using a straight cable connected to a PC or

other Ethernet device. It is also the factory default setting.

II: Straight: Straight: the RJ-45 port Tx and Rx lines are normal.

Use this setting when using a straight cable connected to an

Ethernet device, such as an Ethernet hub/switch.

LAN Connection

Power Input

INIT Button

LAN Cable

Selection Switch

ZyAIR B-400 Quick Installation Guide

—

LAN Connection Use a standard straight, UTP Ethernet cable (RJ-

45 connector) to attach the PC, hub/switch or

broadband router/modem to this port.

Power Input Only use the power adapter supplied with the

adapter

LED Indications

LED Color Status Description

ON The LAN port is linked.

OFF The LAN port is not linked with any

Ethernet device.

Ethernet Green

Blinking The LAN port is sending or

receiving data.

ON The B-400 is linked with a wireless

LAN device.

OFF No data is forwarding between the

wireless LAN and wired LAN ports.

Wireless Green

Blinking Sending or receiving wireless data.

ZyAIR B-400 Quick Installation Guide

—

Hardware Installation

The following illustration is an example showing how to install the B-

400 adapter with a PC. Be sure to use the supplied power adapter.

Note!

The B-400 may also be connected to other

Ethernet-ready devices, such as print servers.

ZyAIR B-400 Quick Installation Guide

—

Wireless Navigator Installation

The Wireless Navigator Utility is provided to allow users to easily

configure the B-400 adapter using any Windows-based PC. This

section describes procedures for installing the Wireless Navigator

Utility onto the PC.

Note!

Please make sure that the PC already has the

TCP/IP protocol installed. If not, please consult

the Windows help file for assistance with setting

up TCP/IP on the PC.

Note!

If the B-400 adapter is used with a non-PC

Ethernet device such as a print server or game

console, users can still install the Wireless

Navigator in any PC located in the same IP

subnet with the B-400. The utility can locate the

B-400 via both wired and wireless Ethernet

connections for remote management.

Step 1: Insert the installation CD-ROM into the CD-ROM drive. Run

the SETUP.EXE program on the CD-ROM. The following

window will be shown automatically.

ZyAIR B-400 Quick Installation Guide

—

Step 2: After the InstallShield Wizard preparation is finished, the

following window will be shown. Click the Next button to continue.

Step 3: Type in the User Name and Company Name, and click the

Next button to continue.

Andere Handbücher für ZyXEL ZyAIR B-400

Inhaltsverzeichnis

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications G-162 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-100 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-402 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4211 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4201 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WPA-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 802.11g Wireless Ethernet Adapter 1-G-470 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-210H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL PLA-401 v3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-400 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-402 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FN-300 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N220 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Omni TA128 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5206 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-470 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR G-260 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung