ZyXEL Communications P-2302HW-P1 Series Bedienungsanleitung

P-2302HW/HWL-P1

802.11b/g Wireless VoIP Station Gateway

Quick Start Guide

Version 3.60

Edition 1

8/2006

P-2302HW/HWL-P1 Series Quick Start Guide

1 Connect the Hardware

1WAN: Use an Ethernet cable to connect the DSL modem to this port.

2LINE(P-2302HWL models only): Use the green PSTN line cable to connect the TEL or PHONE jack on a

splitter to this port. If no splitter is provided connect the the telephone jack to this port.

Note: When the P-2302HWL-P1 does not have power, only the phone connected to the PHONE 1 port

can be used for making calls. Ensure you know which phone this is, so that in case of emergency

you can make outgoing calls.

3ETHERNET: Use an Ethernet cable to connect a computer to this port for initial configuration and/or

Internet access.

4 PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P-2302HW/HWL-P1)

to connect your telephones to these ports. If you only have one telephone, you should use port 1.

P-2302HW/HWL-P1 Series Quick Start Guide

5POWER:Use the power adaptor provided with your P-2302HW/HWL-P1 to connect an appropriate power

source to this socket.

1.1 LEDs (Lights)

•ThePOWER light blinks during start-up and is green once the P-2302HWL-P1 is ready.

• Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected.

The lights blink when the P-2302HWL-P1 is sending or receiving data through the correspond-

ing ETHERNET port.

•TheWAN light stays on if a physical connection with your DSL modem exists. The INTERNET

light stays on when Internet access is available.

•ThePHONE lights stay on when your SIP account is registered and they blink if the receiver is

off the hook.

•TheWLAN light turns on when the wireless LAN is ready. It blinks when the P-2302HWL-P1 is

sending/receiving data through the wireless LAN.

2 Initial Configuration

If none of the LEDs are on, turn the device off and

recheck your hardware connections.

1Open your browser, and go to http://192.168.1.1.2Enter the password 1234. Then, click Login.

P-2302HW/HWL-P1 Series Quick Start Guide

2.1 Connection Wizard

The connection wizard helps you set up your Internet

connection as well as your wireless settings. Click

CONNECTION WIZARD.

Note: Enter the Internet access information exactly

as given to you by your ISP in each wizard

screen and then click Next to continue or click

Back to return to the previous screen.

Current screen information will be lost if you

click Back.

3Follow the directions in this screen. 4Click Go to Wizard setup.

P-2302HW/HWL-P1 Series Quick Start Guide

STEP 1: System Information

STEP 2: Wireless LAN

A Select None for your initial wireless security.

B Select No in the Do you want to enable OTIST ? radio button.

Note: These settings allow you to access the wireless network without setting up any security on your

wireless client. This means that any wireless device within range of your P-2302HW/HWL-P1

can access your wireless network.

If you know the security settings you want to set up you can also enter them in these screens. If

you want to set up OTIST, see the following section. Refer to your User’s Guide for more

information on setting up your wireless network.

This screen is optional. You can just click Next.

•System Name is for identifying the P-2302HW/

HWL-P1. You can enter your computer's "Com-

puter Name".

• If you leave the Domain Name blank, the domain

name obtained by DHCP from the ISP is used.

P-2302HW/HWL-P1 Series Quick Start Guide

OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the

SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2302HW/HWL-P1.

Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P-

2302HW/HWL-P1 will create a WPA-PSK automatically.

If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P-

2302HW/HWL-P1 will replace the WEP key with a WPA-PSK.

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-2302HW/HWL-P1 and all wireless clients within three minutes in any order.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.

If you have previously saved a setup key on the P-2302HW/HWL-P1, use it instead of the default.

STEP 3: WAN

Select one connection type from the drop-down list box. Check with your ISP to make sure you use the correct

type:

1Ethernet

2PPPoE

Note: If you were given Internet access settings, enter them in the following fields. Otherwise leave the

default settings and just click Next.

P-2302HW/HWL-P1 Series Quick Start Guide

A Select Ethernet as your WAN connection type.

B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to C.

Select Use fixed IP address provided by your ISP to give the P-2302HW/HWL-P1 a fixed, unique IP

address. Go to B1.

B1 If you select Use fixed IP address provided by your ISP,enter a WAN IP address, WAN IP Subnet Mask

and the neighboring device’s IP address given by your ISP.

If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and

just click Next.

C Select Factory Default to use the factory assigned default MAC address. Click Apply to save your changes.

The OTIST in Progress screen appears if you enable OTIST in the previous wizard screen. Wait for the P-

2302HW/HWL-P1 to finish transferring OTIST settings.

D Click Finish to complete the wizard.

Ethernet Connection

P-2302HW/HWL-P1 Series Quick Start Guide

A Select PPPoE as your WAN connection type.

B Type a Service Name (Optional), User Name and Password.

C Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to D.

Select Use fixed IP address provided by your ISP to give the P-2302HW/HWL-P1 a fixed, unique IP

address. Go to C1.

C1 If you select Use fixed IP address provided by your ISP,enter a WAN IP address, WAN IP Subnet Mask

and the neighboring device’s IP address given by your ISP.

If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and

just click Next.

D Select Factory Default to use the factory assigned default MAC address. Click Apply to save your changes.

The OTIST in Progress screen appears if you enable OTIST in the previous wizard screen. Wait for the P-

2302HW/HWL-P1 to finish transferring OTIST settings.

E Click Finish to complete the wizard.

PPPoE Connection

P-2302HW/HWL-P1 Series Quick Start Guide

3 Configure VoIP

Click VOIP SETUP.

Note: You should have the information provided by

your VoIP service provider.

Enter the information provided by your VoIP service

provider. Keep the default settings if your VoIP service

provider did not provide some information. If you have a

SIP account like 1234567@VoIP-provider.com, the SIP

Number is 1234567, and the SIP Service Domain is VoIP-

provider.com. When you are done, the PHONE light

should be on. Close the wizard.

Andere Handbücher für P-2302HW-P1 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications P-660HN-51 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 314 PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SBG3300-N series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HN-51D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 660H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HWP-D1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-61 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications ZyWALL USG100-Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 1050 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-793H 601156 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HN-5xb Handbuch

ZyXEL Communications

ZyXEL Communications P660HW-T1V3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX308M Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NSG Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-51A V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications USG-50 - QUICK GUIDE V2.21 ED 1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-793H 601156 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications XMG3512-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2900 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 10 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt