ZyXEL Communications P-2302HWUDL-P1 Series Bedienungsanleitung

P-2302HWUDL-P1

802.11g Wireless VoIP Station Gateway

with Built-in DECT Base Station

Quick Start Guide

Version 3.60

Edition 1

3/2007

P-2302HWUDL-P1 Quick Start Guide

Overview

The P-2302HWUDL-P1 model is a router with IEEE 802.11g wireless capability. It has a built in DECT GAP

base station for compatibility with DECT cordless phones, USB 2.0 ports for sharing files via USB compatible

storage devices and phone ports for making calls over the Internet (Voice over IP or VoIP). The P-

2302HWUDL-P1 can use regular phone services through regular (PSTN) phone lines and can also function as

a print server.

1 Requirements

Make sure you have the following things before you set up your P-2302HWUDL-P1.

• Internet access - account information provided by your ISP, such as user name, password, and so on.

• VoIP account - You need the account information provided by your VoIP service provider (the company that lets

you make phone calls over the Internet). This information might include your URI, number, and so on.

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.

Note: See the User’s Guide for all configuration details including file sharing and setting up a shared

printer.

P-2302HWUDL-P1 Quick Start Guide

2 Hardware Connections - P-2302HWUDL-P1

1WAN: Use an Ethernet cable to connect the DSL modem to this port.

2LINE: Use the green PSTN cable to connect the TEL or PHONE jack on a splitter to this port. If no splitter is

provided connect the telephone jack to this port.

Note: When the ZyXEL Device does not have power, only the phone connected to the PHONE 1 port

can be used for making calls. Ensure you know which phone this is, so that in case of emergency

you can make outgoing calls.

3 ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial configuration and/or

Internet access.

4 PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P-2302HWUDL-P1) to

connect your telephones to these ports. If you only have one telephone, you should use port 1.

P-2302HWUDL-P1 Quick Start Guide

5USB2.0: Use a USB cable (not provided) to connect a USB (version 2.0 or lower) printer to this port.

6 USB 2.0: Connect a USB (version 2.0 or lower) memory stick for file sharing. The P-2302HWUDL-P1

automatically detects the USB device.

7Use the power adaptor provided with your P-2302HWUDL-P1 to connect an appropriate power source to

this socket.

Look at the lights on the side panel of the P-2302HWUDL-P1.

•ThePOWER light blinks during start-up and is green once the P-2302HWUDL-P1 is ready.

• Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected.

The lights blink when the P-2302HWUDL-P1 is sending or receiving data through the corre-

sponding ETHERNET port.

•TheWAN light stays on if a physical connection with your DSL modem exists and blinks when

transmitting data. The INTERNET light stays on when Internet access is available.

•ThePHONE lights stay on when your SIP account is registered and they blink if the receiver is

off the hook.

•TheWLAN light turns on when the wireless LAN is ready. It blinks when the P-2302HWUDL-P1

is sending/receiving data through the wireless LAN.

•TheUSB light turns on when there is a USB device (printer or memory stick) connected to the

P-2302HWUDL-P1.

If PHONE 1 or PHONE 2 light is on, skip to Section 5.2 to see how to make calls through the

Internet.

If the INTERNET light comes on but the PHONE lights are off, go to Section 5and use the

VOIP SETUP wizard.

If the INTERNET light is off but the WAN light is on, go to Section 4and use the CONNECTION WIZARD to

configure your Internet access settings.

If the lights are different than described, go to Troubleshooting.

3 DECT Phone Registration

In order to use your DECT phone with the P-2302HWUDL-P1, the DECT phone must register with the P-

2302HWUDL-P1’s DECT base station. Take the following steps to register your DECT phone with the P-

2302HWUDL-P1.

1Press down the DECT base station button (A) on top of your P-2302HWUDL-P1 for 6 to 11 seconds. When

the LED light of the DECT base station button begins to blink , the P-2302HWUDL-P1 is in registration

mode. The P-2302HWUDL-P1 in registration mode for 25 to 30 seconds. Your DECT phone must be

registered within the time period.

P-2302HWUDL-P1 Quick Start Guide

Note: If you press the DECT base station button for 12 seconds or more, the DECT base station resets

and all previously registered DECT phones must be re-registered.

2Put your DECT phone in registration mode. Refer to your DECT phone documentation.

When the P-2302HWUDL-P1 is in registration mode, the LED of the DECT base station button (A) blinks and

the P-2302HWUDL-P1 starts to scan its surrounding area for DECT phones in registration mode.

Note: To ensure clear communication between the two devices, make sure your DECT phone is within

range of the P-2302HWUDL-P1 during the registration process. See the User’s Guide for details.

3When a P-2302HWUDL-P1 discovers a DECT phone in registration mode, it sends a request for a

Personal Identification Number (PIN). Your DECT phone receives the request and prompts you to enter the

PIN. Enter the PIN in the DECT phone by using the handset keypad. Entering a PIN ensures that only

authorized DECT phones connect to and use your P-2302HWUDL-P1 to make and receive calls.

Note: The default PIN of the P-2302HWUDL-P1 is 1234.

4Repeat steps 1 - 3 to register additional phones.

Note: You can register up to 6 DECT phones with the P-2302HWUDL-P1.

Once your DECT phones are registered with the P-2302HWUDL-P1 you can assign SIP accounts to make

and receive VoIP calls. You can also use DECT phones to make internal calls, see your DECT phone

documentation for more information. Internal calls are calls between DECT phones registered with the P-

2302HWUDL-P1. For the P-2302HWUDL-P1 you can also assign your DECT phones to receive calls from the

PSTN line (regular phone line).

P-2302HWUDL-P1 Quick Start Guide

4 Initial Configuration

1Open your browser and enter the P-2302HWUDL-

P1's IP address 192.168.1.1 (default) as the URL.

2Enter the admin password 1234 (default). Click

If your browser cannot find this screen, make sure

your browser is configured correctly. See

Troubleshooting in the User’s Guide for details.

3Follow the directions in this screen. 4Click Go to Wizard setup.

P-2302HWUDL-P1 Quick Start Guide

4.1 Connection Wizard

The connection wizard helps you set up your Internet

connection as well as your wireless settings. Click

CONNECTION WIZARD.

Note: Enter the Internet access information exactly

as given to you by your ISP in each wizard

screen and then click Next to continue or click

Back to return to the previous screen.

Current screen information will be lost if you

click Back.

STEP 1: System Information

STEP 2: Wireless LAN

A Select None for your initial wireless security.

This screen is optional. You can just click Next.

•System Name is for identifying the P-

2302HWUDL-P1. You can enter your computer's

"Computer Name".

• If you leave the Domain Name blank, the domain

name obtained by DHCP from the ISP is used.

P-2302HWUDL-P1 Quick Start Guide

B Select No in the Do you want to enable OTIST ? radio button.

Note: These settings allow you to access the wireless network without setting up any security on your

wireless client. This means that any wireless device within range of your P-2302HWUDL-P1 can

access your wireless network.

If you know the security settings you want to set up you can also enter them in these screens. If

you want to set up OTIST, see the following section. Refer to your User’s Guide for more

information on setting up your wireless network.

OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the

SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2302HWUDL-P1.

Note: If you enable OTIST but select None in the Security field using the wireless wizard, the P-

2302HWUDL-P1 will create a WPA-PSK automatically.

If you enable OTIST and select Basic(WEP) in the Security field using the wireless wizard, the

P-2302HWUDL-P1 will replace the WEP key with a WPA-PSK.

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-2302HWUDL-P1 and all wireless clients within three minutes in any order.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.

If you have previously saved a setup key on the P-2302HWUDL-P1, use it instead of the default.

P-2302HWUDL-P1 Quick Start Guide

STEP 3: WAN

Select one connection type from the drop-down list box. Check with your ISP to make sure you use the correct

type:

1Ethernet

2 PPP over Ethernet

Note: If you were given Internet access settings, enter them in the following fields. Otherwise leave the

default settings and just click Next.

A Select Ethernet as your WAN connection type.

B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to C.

Select Use fixed IP address provided by your ISP to give the P-2302HWUDL-P1 a fixed, unique IP address.

Go to B1.

B1 If you select Use fixed IP address provided by your ISP,enter a WAN IP address, WAN IP Subnet Mask

and the neighboring device’s IP address given by your ISP.

If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and

just click Next.

C Select Factory Default to use the factory assigned default MAC address and click Next. Then click Apply to

save your changes. The OTIST in Progress screen appears if you enable OTIST in the previous wizard

screen. Wait for the P-2302HWUDL-P1 to finish transferring OTIST settings.

D Click Finish to complete the wizard.

Ethernet Connection

P-2302HWUDL-P1 Quick Start Guide

Andere Handbücher für P-2302HWUDL-P1 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications VSG1435-B101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302HW-P1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications USG1900 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 314 PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL 2 WG Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway... Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PPC 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications p-2302rl series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HN-5xb Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302RL-P1 Handbuch

ZyXEL Communications

ZyXEL Communications P-660HN series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-DX Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HN-51B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications USG-300 - V2.20 ED 2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HWP-D1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-T Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 653HX Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 10W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-61 Referenzhandbuch

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt