ZyXEL Communications P-2602HW-D1A Bedienungsanleitung

P-2602HW(L)-DxA Series

ADSL2+ 4-port Gateway VoIP IAD with IEEE 802.11g Wireless

Quick Start Guide

Version 3.40

Edition 1

5/2006

P-2602HW(L)-DxA Series Quick Start Guide

Overview

This Quick Start Guide is designed to help you set up the P-2602HW-DxA series and the the P-2602HWL-DxA

series devices (“P-2602HW(L)-DxA”). The P-2602HW-DxA series is an ADSL2+ router with a built in 4-port

switch and VoIP integrated access device (IAD). It also can expand your wired network by providing IEEE

802.11g wireless access.

The P-2602HWL-DxA series can also be set up to use regular phone services which do not use the Internet.

Note: The screens in this guide reflect the P-2602HWL-D1 model.

The following figure shows how your P-2602HW(L)-DxA (A) connects your network to the Internet and

provides firewall protection. It also shows how your device can make VoIP calls and calls to regular phones.

1 Requirements

Make sure you have the following things before you set up your P-2602HW(L)-DxA.

• Internet access - account information provided by your ISP, such as user name, password, and so on.

• VoIP account - You need the account information provided by your VoIP service provider (the company that lets

you make phone calls over the Internet). This information might include your URI, number, and so on.

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.

P-2602HW(L)-DxA Series Quick Start Guide

2 Hardware Connections

1DSL: Use the gray ADSL cable to connect the DSL (or MODEM) jack on a splitter to this port. If a splitter is

not provided connect the telephone jack to this port.

2LINE: Use the green PSTN line cable to connect the TEL (or PHONE) jack on a splitter to this port. If a splitter

is not provided connect the telephone jack to this port. The LINE port is only available in the P-2602HWL-

DxA models.

Note: When the ZyXEL Device does not have power, only the phone connected to the PHONE 1 port

can be used for making calls. Ensure you know which phone this is, so that in case of emergency

you can make outgoing calls.

P-2602HW(L)-DxA Series Quick Start Guide

3ETHERNET1~4: Use Ethernet cables to connect computers to this port for initial configuration and/or

Internet access.

4 PHONE 1-2: Use a telephone cable (and any telephone adaptors provided with your P-2602HW(L)-DxA) to

connect your telephones to these ports. If you only have one telephone, you should use port 1.

5POWER:Use the power adaptor provided with your P-2602HW(L)-DxA to connect an appropriate power

source to this port.

Note: If you are using T-ISDN (UR-2), connect the green wire to a TAE connector before connecting it

to a telephone wall jack or the telephone splitter's TEL (or PHONE) jack.

6Push in the POWER button. Look at the lights on either side of the P-2602HW(L)-DxA.

•ThePOWER light blinks during start-up and is green once the P-2602HW(L)-DxA is ready.

• Each ETHERNET light turns on if the corresponding ETHERNET port is properly connected.

The lights blink when the P-2602HW(L)-DxA is sending or receiving data through the corre-

sponding ETHERNET port.

•TheDSL light stays on if a physical connection with the ISP is established. The INTERNET

light stays on when Internet access is available.

•ThePHONE lights stay on when your SIP account is registered and they blink if the receiver

is off the hook.

•TheWLAN light turns on when the wireless LAN is ready. It blinks when the P-2602HW(L)-

DxA is sending/receiving data through the wireless LAN.

If the PHONE 1 or PHONE 2 light is on, go to Section 4 to see how to make calls through

the Internet.

If the INTERNET light comes on but the PHONE lights are off, go to Section 3.3 and use the

VOIP SETUP wizard.

If the INTERNET light is off but the DSL light is on, go to Section 3.1 and use the

INTERNET SETUP wizard to configure your Internet access settings.

If the lights are different than described, go to Troubleshooting.

P-2602HW(L)-DxA Series Quick Start Guide

3 Initial Configuration

3.1 Internet/Wireless Setup

Note: You should have the information provided by your ISP.

1Open your browser, and go to http://192.168.1.1.2Enter the password 1234. Then, click Login.

If your browser cannot find this screen, make sure

your browser is configured correctly. See

Troubleshooting in the User’s Guide for details.

3Follow the directions in this screen. 4Click Go to Wizard setup. Then, click Apply.

P-2602HW(L)-DxA Series Quick Start Guide

1Click INTERNET/WIRELESS SETUP.

2Wait while the P-2602HW(L)-DxA tries to detect

your Internet connection. If the P-2602HW(L)-

DxA cannot detect your Internet connection,

follow the directions. Enter the information

provided by your ISP. Keep the default settings

if your ISP did not provide some information.

Make sure your wireless security settings are

compatible with your existing wireless devices.

See the User’s Guide for more information on

wireless networks. If you want to set up OTIST, go

to Section 3.2.

3When your Internet connection is setup

correctly, the INTERNET light should be green.

When you are finished click Return to Wizard

Main Page.

3.2 Wireless Security and OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the

SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2602HW(L)-DxA.

Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P-

2602HW(L)-DxA will create a WPA-PSK automatically.

If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P-

2602HW(L)-DxA will replace the WEP key with a WPA-PSK.

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-2602HW(L)-DxA and all wireless clients within three minutes in any order.

To start OTIST on the P-2602HW(L)-DxA, hold in the RESET button for one to five seconds. Do not hold the

RESET button in for too long, as this will reset the P-2602HW(L)-DxA to the factory defaults. You can also

start OTIST in the wireless wizard screen.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.

If you have previously saved a setup key on the P-2602HW(L)-DxA, use it instead of the default.

For more information on wireless security and configuration, see Wireless LAN in the User's Guide.

P-2602HW(L)-DxA Series Quick Start Guide

3.3 VoIP Setup

1Click VOICE OVER INTERNET SETUP.

Note: You should have the information provided

by your VoIP service provider.

2Enter the information provided by your VoIP

service provider. Keep the default settings if your

VoIP service provider did not provide some

information. If you have a SIP account like

1234567@VoIP-provider.com, the SIP Number

is 1234567, and the SIP Service Domain is VoIP-

provider.com.

3When you are done, the PHONE light should be

on. Close the wizard and the main screen opens.

3.4 Regular Phone Line Setup (“L” Models Only)

When one of your VoIP accounts is registered, the P-2602HW(L)-DxA normally uses the Internet (not the

regular phone line) to make phone calls. Follow the directions in this section to make sure you can also use

the regular phone line while one of your VoIP accounts is registered.

Note: When the ZyXEL Device does not have power, only the phone connected to the PHONE 1 port

can be used for making calls. Ensure you know which phone this is, so that in case of emergency

you can make outgoing calls.

In the main screen, click VoIP > PSTN Line.

P-2602HW(L)-DxA Series Quick Start Guide

PSTN Line Pre-fix Number: If you want to make a regular

phone call while one of your SIP accounts is registered.

Enter a prefix number (1 to 7 digits long) in the PSTN Line

Prefix Number field. These numbers tell the ZyXEL device

that you want to make a regular phone call.

Relay to PSTN Line: Enter phone numbers for regular

phone calls (that do not use the Internet) that you always

want to dial without the prefix number. For example, enter

emergency phone numbers here.

Click Apply.

4 Phone Calls

When a PHONE light turns on, your SIP account is registered successfully. Dial a numerical SIP number (like

“12345” for example) on your phone’s keypad. Use your voice service provider’s dialing plan to make calls

through the Internet to regular telephone numbers. See your User’s Guide for other calling options.

Troubleshooting

If you cannot access the Internet, follow these steps.

1Check the device’s lights. If they are different than what is described in Section 2, turn off the device, make

sure the connections are correct, and inspect your cables for damage. Turn the device on again.

2Follow the steps in Section 3 again. Make sure you enter the correct information. For example, if your

account has a user name and password, make sure you type it correctly. In addition, if you are not sure

which encapsulation your ISP uses, contact your ISP.

3If you are using a new Internet account, contact your ISP to make sure it is active.

4If you still have problems, see Troubleshooting in the User’s Guide.

If you can access the Internet, but you cannot make calls through the Internet, follow these steps.

1Check the PHONE lights. If neither of them is on, make sure that your telephone is connected to the

corresponding PHONE port.

2Make sure the VOICE OVER INTERNET SETUP wizard screens are properly configured (see Section 3.3).

3You can also check the VoIP status in the Status screen. See the User’s Guide for more information about

this screen.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications AMG1312-T Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-661H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-I1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nebula NSG Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Handbuch

ZyXEL Communications

ZyXEL Communications Prestige 314 PLUS Handbuch

ZyXEL Communications

ZyXEL Communications VMG4825-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1312-T10D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG6726-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-51 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302HWUDL-P1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 660W/HW Series Montageanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-BX0D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-662H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL2+ 4-port Gateway P-660H-D Series Handbuch

ZyXEL Communications

ZyXEL Communications N4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VSG1432 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P873HNUP - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 660 HW Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt