ZyXEL Communications ZyAIR G-4100 Bedienungsanleitung

ZyAIR G-4100

802.11g Wireless Hotspot Gateway

Quick Start Guide

Version 1.00

8/2005

ZyAIR G-4100

Table of Contents

1 Introducing the ZyAIR...................................................................................................... 2

1.1 Safety Warnings .......................................................................................................... 2

1.2 Side Panel Connections .............................................................................................. 4

1.3 The Front Panel LEDs ................................................................................................. 5

1.4 Factory Defaults........................................................................................................... 6

2 Setting Up Your Computer’s IP Address ....................................................................... 6

2.1 Windows 2000/NT/XP.................................................................................................. 7

2.2 Checking/Updating Your Computer’s IP Address ....................................................... 8

2.3 Testing the Connection to the ZyAIR........................................................................... 8

3 Configuring Your ZyAIR .................................................................................................. 9

3.1 Accessing Your ZyAIR Via Web Configurator ............................................................. 9

3.2 Internet Connection Wizard ....................................................................................... 10

3.3 Introducing the Web Configurator.............................................................................. 20

3.4 Resetting the ZyAIR................................................................................................... 21

3.5 Test Your Internet Connection................................................................................... 22

4 Hardware Installation ..................................................................................................... 22

4.1 Attaching Antennas.................................................................................................... 22

4.2 Hardware Mounting Installation ................................................................................. 23

5 Troubleshooting ............................................................................................................. 26

1 Introducing the ZyAIR

The ZyAIR Hot Spot Gateway combines an IEEE 802.11g wireless access point, router, 4-port

switch and service gateway in one box. If you have an “exclusive printer”, you can connect it

directly to the ZyAIR, allowing you to easily print subscriber statements. The ZyAIR is ideal for

offices, coffee shops, libraries, hotels and airport terminals catering to subscribers that seek Internet

access. You should have an Internet account already set up and have been given usernames,

passwords etc. required for Internet access.

1.1 Safety Warnings

For your safety, be sure to read and follow all warning notices and instructions.

ZyAIR G-4100

 Do NOT open the device or unit. Opening or removing covers can expose you to dangerous

high voltage points or other risks. ONLY qualified service personnel can service the

device. Please contact your vendor for further information.

 Use ONLY the dedicated power supply for your device. Connect the power cord or power

adaptor to the right supply voltage, that is, 110V AC for North America or 230V AC for

Europe.

 Do NOT use the device if the power supply is damaged as it might cause electrocution.

 If the power supply is damaged, remove it from the power outlet.

 Do NOT attempt to repair the power supply. Contact your local vendor to order a new

power supply.

 Place connecting cables carefully so that that no one will step on them or stumble over

them. Do NOT allow anything to rest on the power cord and do NOT locate the product

where anyone can walk on the power cord.

 If you wall mount your device, make sure that no electrical, gas or water pipes will be

damaged.

 Do NOT install nor use your device during a thunderstorm. There may be a remote risk of

electric shock from lightning.

 Do NOT expose your device to dampness, dust or corrosive liquids.

 Do NOT use this product near water, for example, in a wet basement or near a swimming

pool.

 Make sure to connect the cables to the correct ports.

 Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.

 Do NOT store things on the device.

 Connect ONLY suitable accessories to the device.

ZyAIR G-4100

1.2 Side Panel Connections

Figure 1 ZyAIR Side Panel Connections

ZyAIR G-4100

Table 1 Side Panel Connections

LABEL DESCRIPTION

PRINTER Use the printer cable to connect an “exclusive printer” to this port.

LAN 1-4 These ports are auto-crossover, (”auto MDI/MDI-X”) which means you can use either a

straight-through or crossover Ethernet cable to connect the ZyAIR to a computer or a hub.

WAN Connect your broadband modem to this port with the Ethernet cable that came with your

modem.

RESET You only need to use this button if you’ve forgotten the ZyAIR’s password. It returns the

ZyAIR to the factory defaults (password is 1234, LAN IP address 192.168.1.1).

POWER 5VDC After you’ve made the above connections, connect the ZyAIR’s included power adaptor to

the ZyAIR’s power socket. Use only the included power adaptor. The PWR LED turns on.

The LAN and WAN LEDs flash and then turn on if they have proper connections. The

ZyAIR LED turns on for 20 seconds and then turns off. The SYS LED turns on. The ZyAIR

LED turns back on and blinks if the wireless connection is active.

1.3 The Front Panel LEDs

Figure 2 ZyAIR Front Panel

ZyAIR G-4100

Table 2 Front Panel LEDs

LED STATUS DESCRIPTION

ZyAIR On (Blue) The ZyAIR is ready, but is not sending/receiving data through the wireless

LAN.

Blinking (Blue) The ZyAIR is sending/receiving data through the wireless LAN.

LAN (1-4) On (Green) The port is connected to a 10/100Mbps Ethernet device.

Blinking (Green) The port is receiving or sending data.

Off The port is not connected to a 10/100Mbps Ethernet device.

WAN On (Green) The WAN port has a connection to your cable or DSL modem.

Blinking (Green) The WAN port is sending or receiving packets.

Off The WAN link is not ready, or has failed.

SYS On (Green) The ZyAIR is ready and running.

Off The ZyAIR is not ready or has failed.

PWR On (Green) The ZyAIR is receiving power.

Off The ZyAIR is not receiving power.

1.4 Factory Defaults

Table 3 Factory Defaults

Username “admin” (case sensitive) WAN IP Address DHCP Client (dynamic WAN IP)

Password “1234” LAN IP Address 192.168.1.1

LAN DHCP Server

2 Setting Up Your Computer’s IP Address

Skip this section if your computer is already set up to accept a dynamic IP

address. This is the default for most new computers.

The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your

computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254

ZyAIR G-4100

range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can

communicate with your ZyAIR.

Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed

on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

2.1 Windows 2000/NT/XP

1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2. In the Control Panel, double-click Network Connections (Network and Dial-up Connections in

Windows 2000/NT).

3. Right-click Local Area Connection and then click Properties.

4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.

5. The Internet Protocol TCP/IP Properties screen

opens (the General tab in Windows XP).

- To have your computer assigned a dynamic IP

address, click Obtain an IP address automatically.

If you know your DNS sever IP address(es), type them

in the Preferred DNS server and/or Alternate DNS

server fields.

-To configure a static IP address, click Use the

following IP Address and fill in the IP address

(choose one from 192.168.1.2 to 192.168.1.254),

Subnet mask (255.255.255.0), and Default gateway

(192.168.1.1) fields.

Then enter your DNS server IP address(es) in the

Preferred DNS server and/or Alternate DNS server

fields.

If you have more than two DNS servers, click

Advanced, the DNS tab and then configure them using

Add.

ZyAIR G-4100

6. Click Advanced. Remove any previously installed

gateways in the IP Settings tab and click OK to go back

to the Internet Protocol TCP/IP Properties screen.

7. Click OK to close the Internet Protocol (TCP/IP)

Properties window.

8. Click Close (OK in Windows 2000/NT) to close the

Local Area Connection Properties window.

9. Close the Network Connections window (Network

and Dial-up Connections in Windows 2000/NT).

2.2 Checking/Updating Your Computer’s IP Address

1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your computer’s IP

address is in the correct range (192.168.1.2 to 192.168.1.255) with subnet mask 255.255.255.0. This is

necessary in order to communicate with the ZyAIR.

Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh

computer operating systems.

2.3 Testing the Connection to the ZyAIR

1. Click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ping” followed by a space and the IP address of the ZyAIR

(192.168.1.1 is the default).

ZyAIR G-4100

3. Press ENTER and the following screen displays.

Your computer can now communicate with the ZyAIR using a LAN port.

3 Configuring Your ZyAIR

This guide shows you how to use the web configurator for initial

configuration. See your User’s Guide for background information on all

other ZyAIR features.

3.1 Accessing Your ZyAIR Via Web Configurator

1. Your web browser must have JavaScript support enabled. Launch your web browser. Enter

“192.168.1.1” as the web site address.

Figure 3 Entering ZyAIR LAN IP Address in Internet Explorer

2. A login screen displays. Enter the user name (“admin” is the default), password (“1234” is the

default) and click Getting Started. The user name is case sensitive, so enter “admin” exactly as

shown. If you make an incorrect entry, refresh your browser and try again. Only one

administrator can log in at one time. The ZyAIR logs you out after five minutes of no

management using the web configurator, so you then have to log in again.

Web site address.

C:\>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=10ms TTL=254

Reply from 192.168.1.1: bytes=32 time<10ms TTL=254

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 10ms, Average = 2ms

ZyAIR G-4100

Figure 4 Web Configurator: Login Screen

3.2 Internet Connection Wizard

The Wizard Setup screens appear by default after login only the first time you access the ZyAIR and

run the wizard. After that, the SYSTEM QUICK VIEW screen appears after login.

1. The first Wizard screen displays after your initial login. This first screen varies depending on the

type of Internet connection you use.

Figure 5 Internet Connection: DHCP Client

Select DHCP Client if your ISP did not assign

you a fixed IP address. Your ISP assigns the

ZyAIR’s WAN port a dynamic IP address. This is

the default selection.

Click Next to continue to Figure 9.

Andere Handbücher für ZyAIR G-4100

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications PRESTIGE 2302RL - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 35 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HNT1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302R-P1C Handbuch

ZyXEL Communications

ZyXEL Communications VMG1312-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SBG5500 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE6101 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-662H-61 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications ZyWALL 70 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG5313-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-4000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG5100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications USG-300 - V2.20 ED 2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1302-T11C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1202-T10A Bedienerhandbuch

ZyXEL Communications

ZyXEL Communications UAG4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-T1 v3s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 20/20W Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-D1 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt