ZyXEL Communications A-6000 Bedienungsanleitung

A-6000

High Speed, Long Range Ethernet Wireless Bridge

Ver 1.0

January, 2005

Quick Start Guide

Table of Contents

1. Introduction to the A-6000 ...................................................................4

2. Product installation requirements ......................................................4

3. Hardware Description ..........................................................................5

3.1. Packing list ...............................................................................................5

3.2. The outdoor unit .......................................................................................6

3.3. The Indoor Unit .........................................................................................7

4. Configuring A-6000 ..............................................................................7

4.1. Default Configuration...............................................................................7

4.2. To access the A-6000 System WEB Server ............................................8

4.3. System Configuration ..............................................................................9

4.3.1 Working with Configuration Windows – System Setup ........................9

4.3.2 System Configuration Windows - Software Download .......................12

4.3.3 System Log Windows ............................................................................13

5. Hardware Installation .........................................................................13

5.1. A-6000 office test....................................................................................13

5.2. A-6000 Physical Connection..................................................................15

5.3. Installation of outdoor unit ....................................................................15

5.4. Indoor Unit Installation...........................................................................19

5.5. Initializing the A-6000 .............................................................................19

5.6. Antenna Alignment.................................................................................19

5.7. Indoor Interface Unit ..............................................................................20

5.8. System LED Indication...........................................................................21

5.9. RSSI LED Indication ...............................................................................21

5.10. Alignment Tools......................................................................................21

5.11. Special Notice for Waterproof Installation............................................22

List of figures

Figure 3-1 Packing contents of A-6000 ................................................................................ 6

Figure 3-2 Top panel of outdoor unit .................................................................................... 7

Figure 3-3 Bottom panel of outdoor unit ............................................................................. 7

Figure 4-1 Status-System information.................................................................................. 8

Figure 4-2 Status Wireless information................................................................................ 9

Figure 4-3 Configuration-System setup............................................................................. 10

Figure 4-4 Configuration –Wireless setup......................................................................... 10

Figure 4-5 FTP firmware update........................................................................................... 12

Figure 4-6 System log............................................................................................................. 13

Figure 5-1 Physical connection of A-6000 for office test with flat panel antennas 14

Figure 5-2 Physical Installation of A-6000 with flat panel antenna............................. 15

Figure 5-3 Mounting Bracket Assembly............................................................................. 16

Figure 5-4 Attach the Mounting Bracket to Outdoor Unit.............................................. 16

Figure 5-5 Install Outdoor Unit to the Mast ....................................................................... 16

Figure 5-5 Install Antenna to the Outdoor Unit ................................................................ 17

Figure 5-6 Connect Cat-5 cable to the outdoor unit ....................................................... 17

Figure 5-8 Connect Grounding wire to the outdoor unit ............................................... 18

Figure 5-9 Cable Connections of Network/Power Injector............................................ 19

Figure 5-10 Waterproof installation of cable connections ............................................ 22

List of tables

Table 3-1 Connectors of outdoor unit................................................................................... 7

Table 3-2 Connectors of indoor unit ..................................................................................... 7

Table 4-1 Default configuration .............................................................................................. 7

Table 4-2 Parameter description .......................................................................................... 12

1. Introduction to the A-6000

The ZyXEL A-6000 is a Wireless Bridge for Inter-building Point to Point Ethernet connection. By supporting

AES/TKIP, A-6000 is particularly suited for sensitive data transmission. System privacy is also inherent

through the MAC & 802.1x based mutual authentication functionality. Outdoor-mounted design with

weatherproof enclosure and connecting with low loss cable to antenna achieves outstanding performance in

the longer communication distance. The power over Ethernet (POE) technology supplies the power and

Ethernet connectivity via a single Ethernet cable and allows users to install system quickly. A-6000 meets

FCC 15.203 regulations. The A-6000 is strictly intended for sale to the professional market as it requires

sophisticated installation methods and is an integral part of a larger infrastructure that will be sold to ZyXEL

licensed operators as a package. The A-6000 uses a standard N-type connector however it requires installation

done only by a licensed professional due to the complexity of the technology and product. Installation

requires special training by ZyXEL to align the antennas.

2. Product installation requirements

1. The A-6000 can only be installed by a licensed installer; training and access to technical requirements will

be provided through the user guide and through training done by the business partnership agreements with

respective customers.

2. The installation will be done in a controlled and licensed environment; and filing of the appropriate

documentation as required by local law.

3. Installation requires special training (special programming, access to keypad, field strength measurements

made) by ZyXEL of the installation and maintenance teams of the ZyXEL licensed service providers and

operators.

4. ZyXEL licensed service providers will be required to have their installation teams trained to do installation

of the A-6000 and antennas on high sited areas in order to meet the performance and regulatory requirements.

This will require professional installation; the installation of the A-6000 must be controlled and installed by

licensed professionals. Specially designed antennas and mounting procedures will be required and

professional installation needed to ensure the equipment works reliably and compatibly with the complete

ZyXEL infrastructure.

5. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the ZyXEL

or its customer shall be used with the A-6000. The use of a permanently attached antenna or of an antenna

that uses a unique coupling to the intentional radiator shall be considered sufficient to comply. If the unit

becomes broken, the antenna can be replaced by the user, but the use of a standard antenna jack or electrical

connector is prohibited. Further, this requirement does not apply to intentional radiators that must be

professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other

intentional radiators which must be measured at the installation site. However, the installer shall be

responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded.

6. This standard antenna may be used in a point-to-point application, and possibly may require a tower mount

and/or directional antenna. Such use would be applicable in the following uses: data and control signal

transmitter located in oil fields; transmitters mounted on trains and train stations; pole-mounted police and/or

emergency vehicles.

7. Permanent attachment of the A-6000 can be achieved by various means such as factory application of a

permanent cement or epoxy to a standard antenna connector. The A-6000 will specify the certification

application type of adhesive to be used and must confirm that the adhesive will be applied at the factory –

prior to shipment.

8. The installer must ensure that the A-6000 and antenna is properly installed so as not to exceed the limits for

which it has been designed.

9. Compliance is required for special waterproofing procedures, insulation against lightening and other

weather conditions.

10. Also requires special mounting brackets for instillation in professional environments.

11. Licensees will be recruited primarily from existing service providers and manufacturers that are already

successful in Internet, paging, or mobile phone service industries.

12. ZyXEL will provide products and services through service providers, its main sales strategies will be to

empower service providers and to provide on-going service and support to service providers. Service

providers will focus on local markets and offer flexible services to niche markets.

13. Multiple service providers can be started with a relatively low cost of entry. ZyXEL will provide licensing

companies already in the service industry (such as Internet, paging, or mobile telephone service companies), it

will be possible to qualify and license service provides in a short space of time.

14. ZyXEL will provide all starter ingredients (such as prototypes) on a discounted basis to Widenet service

providers for smooth transition and integration into existing client bases, authorization, and billing.

15. All equipment will be sold only to ZyXEL qualified network operators that will be purchasing the

equipment as a part of an infrastructure to provide services. The intended use and design of the A-6000 is for

use by utility companies, large telecom corporations to build out or compliment their current infrastructure for

radio frequency and telecommunications signaling.

3. Hardware Description

The A-6000 is composed of outdoor and indoor unit which are connected by a single Ethernet cable.

3.1. Packing list

a. Outdoor Unit

b. Network Power injector

c. HDF 400 RF coaxial cable

d. 20m Cat-5 STP cable with special waterproof connector

e. Mounting bracket

f. power adaptor

g. CAT-5 Straight-through Ethernet cable

h. RS-232 cable

i. Grounding wire

j. Quick installation guide

k. Supporting CD

l. antenna alignment kit

Optional components

m. 22 dBi antenna

n. 50m Cat-5 STP cable with special waterproof connector

o. 90m Cat-5 STP cable with special waterproof connector

Figure 3-1 Packing contents of A-6000

3.2. The outdoor unit

The outdoor unit is a radio transceiver equipped with a robust IP66 approved enclosure and features a N-type

connector for external antenna connection. A special weather proven connector is used for connecting the

single STP cable to the indoor unit and special weatherproof RS232 connector is built for the connection of a

special designed antenna alignment kit to align the directional antenna.

Figure 3-2 Top panel of outdoor unit

Figure 3-3 Bottom panel of outdoor unit

Table 3-1 Connectors of outdoor unit

Function Location Label Interface Description

Antenna Top

N male RF connector with

special water proof

Connecting to the outdoor antenna

Signal &

Power

Bottom

8-pin female connector

with special water proof

Connecting to the indoor interface unit

supplying the power and signal

Antenna

alignment

Bottom

8-pin male connector with

special water proof

Connecting to AK-100 for antenna

alignment

3.3. The Indoor Unit

The indoor unit is a network/power injector which is used to combine the signal stream and DC power into

single category-5 cable to connect outdoor unit. It has three ports.

Table 3-2 Connectors of indoor unit

Function Name Connector Description

Power POWER Power jack Connecting to the outdoor antenna

Ethernet TO LAN RJ45 User for CPE connection via straight through

Ethernet cable

Signal & Power TO RADIO RJ45 Used for outdoor unit connection via special

waterproof category-5 cable

4. Configuring A-6000

This guide shows you the default factory configuration of A-6000 and how to configure the A-6000 for

appropriate operation at the first time. See the User’s Guide for configuration details.

4.1. Default Configuration

The A-6000 is shipped with following factory default configurations:

Table 4-1 Default configuration

BU RU

LAN IP 192.168.1.1 192.168.1.1

Subnet Mask 255.255.255.0 255.255.255.0

Wireless ESSID Wireless Wireless

Username/Password admin/1234 admin/1234

4.2. To access the A-6000 System WEB Server

There are three tags on left-top of the Web Server System Status window: Status, Configuration and Syslog.

Each of the tag contains different functions of the A-6000 management.

Follow these steps to configure the channel frequency and SSID using a web browser:

1. Launch a web browser (Netscape Navigator or Internet Explorer are examples of commonly used web

browsers).

2. From the PC, enter the IP address that is assigned to the system as the URL address, for example

http://192.168.1.1.

3. A dialog box appears requesting login authorization.

When prompted, enter the following information to log in:

Password: 1234

Click OK to complete the login process.

NOTE: The web browser must support frames and Java script must be enabled.

4. The A-6000 Web Server System Status window appears as below:

Figure 4-1 Status-System information

5. Press the Wireless Information, then current Radio Status is shown as below:

Figure 4-2 Status Wireless information

4.3. System Configuration

The web server windows allow you to setup the configuration information for the system. The web server

provides functions for system setup and firmware updates by clicking the “Configuration” tag on left-top of

the WEB window.

To access any of these system configuration screens, click on the desired hotlink from the navigation bar in

the “Configuration” screen.

4.3.1 Working with Configuration Windows – System Setup

The Web Server configuration windows provide a user-friendly interface to aid in quick configuration of the

system. After making any additions or changes to any configuration window, update the configuration file to

save the changes. The new configuration is not in effect until the system reboots.

Andere Handbücher für A-6000

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications NR/FWA Outdoor Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 642 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWall Montageanleitung

ZyXEL Communications

ZyXEL Communications IES-1000 - ANNEXE 7 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-662HW-D - V3.40 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-419N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS-4012F Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Dimension ES-3124PWR Referenzhandbuch

ZyXEL Communications

ZyXEL Communications PRESTIGE 650H - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG5313-BXB SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NXC5200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302R-P1C Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 100 - VERSION 2.20 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 1 Handbuch

ZyXEL Communications

ZyXEL Communications NBG334W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8623-T50B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660R-T Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3316 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8924-B10D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 2602HWL-D3A Montageanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise