ZyXEL Communications P-660R-T Series Bedienungsanleitung

P-660R-T Series

ADSL2+ Access Router

Quick Start Guide

Version 3.40

9/2005

P-660R-T Series Quick Start Guide

Overview

The Prestige 660R-T (P-660R-T) ADSL2+ access router is the ideal device for small networks connecting to

the Internet via ADSL.

See your User’s Guide for background information on all features.

1 Hardware Connections

If you prefer to see a multi-media animation of how to make hardware connections, see the included CD.

1DSL: Connect the Prestige to a telephone jack using a telephone wire.

2LAN: Use an Ethernet cable to connect a computer to the LAN port for initial configuration and/or Internet

access.

3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source

(see the User’s Guide for power adaptors specifications by region).

After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel

LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS then turn steady on if the

testing is successful. The LAN LED turns on if the LAN port is properly connected.

2 Configuration for Internet Access

You may configure the Prestige for Internet access in any one of these ways:

• Configuration Genie

P-660R-T Series Quick Start Guide

• Zero Configuration

•Web Configurator Internet Access Wizard

Note: Configuration genie or Zero configuration are only able to configure the device automatically for

Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a

dynamically-assigned IP address from your ISP.

If you’re not using these Internet access settings, then use the Web Configurator Internet

Access Wizard to manually configure the device.

You will need your Internet access information such as user name and password if given by your ISP.

2.1 Configuration Genie

From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and

then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the

installation tutorial or from “Multimedia Auto Provisioner” in the CD.

2.2 Zero Configuration

Launch your web browser and navigate to any web

site (for example, www.zyxel.com). The Prestige

automatically detects and configures your Internet

connection. This may take about two minutes.

If you have a PPPoE or PPPoA

connection, a screen displays

prompting you to enter your

Internet account information.

Enter the username, password

and/or service name exactly as

provided. Click Apply.

INFORMATION From ISP ENCAPSULATION METHOD YOU ARE USING

None RFC1483 in bridged mode with a dynamic IP address or

ENET ENCAP with a dynamic IP address

An IP address only RFC1483 in routing mode with a static IP address

A user name and password (and an IP address) PPPoA or PPPoE encapsulation (with a static IP address)

An IP address, subnet mask and a gateway IP

address

ENET ENCAP with a static IP address

P-660R-T Series Quick Start Guide

2.3 Web Configurator Internet Access Wizard

2.3.1 Accessing the Web Configurator

1Launch your web browser. Enter “192.168.1.1” as the web site address.

Note: If you do not see the next screens, then please read Section 4.1 on page 8.

2Click Login.

3Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main

web configurator screen.

4In the Site Map screen, click Wizard Setup.

P-660R-T Series Quick Start Guide

2.3.2 Internet Access Setup

1Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and

Encapsulation you chose in the first wizard screen.

Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen. If

not given, leave the fields set to the default.

RFC 1483

A) Select Routing if your ISP gave

you an IP address and allows

multiple computers to share an

Internet account. Otherwise, select

Bridge. Then select RFC 1483.

B) Click Next.

C) If you selected Routing, enter the

IP address given by your ISP.

D) If you selected Routing,select

SUA Only when you have one

public IP address, Full Feature

when you have more than one

public IP address (for translation)

or None to disable NAT.

E) Click Next.

ENET ENCAP

A) Select Routing, then ENET

ENCAP.

B) Click Next.

C) If your ISP gave you an IP

address, subnet mask and

gateway address, select

Static IP address and enter

them. Otherwise, select

Obtain an IP Address

Automatically.

D) Select SUA Only if you

have one public IP address,

Full Feature if you have

more than one public IP

address (for translation) or

None to disable NAT.

E) Click Next.

P-660R-T Series Quick Start Guide

PPPoE

A) Select Routing, then

PPPoE.

B) Click Next.

C) Enter the service name,

username and password

given by your ISP.

D) If your ISP gave you an IP

address, select Static IP

address and enter it.

Otherwise, select Obtain an

IP Address Automatically.

E) Select Nailed-Up

Connection to have your

connection up all the time.

Otherwise, select Connect

on Demand and specify an

idle time-out period (in

seconds) in the Max. Idle Timeout field.

F) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP

address (for translation) or None to disable NAT.

G) Click Next.

PPPoA

A) Select Routing if your ISP

allows multiple computers

to share an Internet

account. Otherwise, select

Bridge. Then select

PPPoA.

B) Click Next.

C) Enter the username and

password given by your

ISP.

D) If your ISP gave you an IP

address, select Static IP

address and enter it.

Otherwise, select Obtain an

IP Address Automatically.

E) Select Nailed-Up

Connection to have your

connection up all the time.

P-660R-T Series Quick Start Guide

Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle

Timeout field.

F) If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you

have more than one public IP address (for translation) or None to disable NAT.

G) Click Next.

2Verify your LAN and

WAN settings and click

Save Settings.

3The Prestige

automatically tests the

connection to the

computer(s) connected

to the LAN port. To test

the connection from the

Prestige to the ISP, click

Start Diagnose.

Otherwise click Return

to Main Menu to go back

to the main screen.

3 NAT

NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to

a different IP address in another. For example, you could translate one public IP address to multiple private IP

addresses on your LAN (SUA Only). You must select Routing mode to use routing features such as NAT.

Click

Advanced

Setup and

then NAT to

open the

NAT-Mode

screen.

Select SUA

Only if you

have one public IP address and Full Feature if

you have multiple public IP addresses (for

address translation).

If you have

servers on your

LAN, configure

an SUA server

set to have

them visible to

the outside.

From the NAT -

Mode screen

click Edit

Details and fill

in the fields as

shown.

P-660R-T Series Quick Start Guide

4 Troubleshooting

4.1 Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can connect with your Prestige. Refer to your User’s Guide for detailed IP

address configuration for other Windows and Macintosh computer operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

3Right-click Local Area Connection and then click Properties.

PROBLEM CORRECTIVE ACTION

None of the LEDs turn on

when you connect the

Prestige’s power.

Make sure that you have the correct power adaptor connected to the Prestige, it is

plugged into an appropriate power source and the Prestige is turned on.

Check all cable connections. If the LEDs still do not turn on, you may have a hardware

problem. In this case, you should contact your local vendor.

Cannot access the

Prestige from my

computer.

Check the cable connection from your computer to the Prestige.

Make sure your computer’s IP address is in the same subnet as the Prestige’s IP

address (see Section 4.1 on page 8).

Ping the Prestige from a computer on the LAN. Make sure your computer’s Ethernet

adapter is installed and functioning properly. In the computer, click Start, (All)

Programs, Accessories and then Command Prompt. In the Command Prompt

window, type "ping" followed by the Prestige’s LAN IP address (192.168.1.1 is the

default) and then press [ENTER]. The Prestige should reply; otherwise see Section

4.1 on page 8.

If the Prestige’s IP address has changed, then enter the new one as the URL.

Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with

JavaScript enabled.

Make sure you enter the password correctly (the field is case sensitive).

If you’ve forgotten the Prestige’s password, use the RESET button. Press the button in

for about 10 seconds (or until the PWR/SYS LED starts to blink), then release it. It

returns the Prestige to the factory defaults (password is 1234, LAN IP address

192.168.1.1 etc.; see your User’s Guide for details).

Cannot access the

Internet.

Verify the Internet connection settings in the wizard. Make sure you entered the

correct user name and password if you are using PPPoE or PPPoA.

The Prestige stores the Internet connection settings that it detects using zero

configuration. Reset the Prestige to the factory defaults or manually configure it for

Internet access if you connect it to another DSL line with a different VPI and VCI.

P-660R-T Series Quick Start Guide

4Select Internet Protocol (TCP/IP) (under the General tab in

Windows XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

6Select the Obtain an IP address automatically and Obtain

DNS server address automatically options.

7Click OK to close the Internet Protocol (TCP/IP) Properties

window.

8Click Close (OK in Windows 2000/NT) to close the Local Area

Connection Properties window.

9Close the Network Connections screen.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Inhaltsverzeichnis

Andere ZyXEL Communications Netzwerk-Router Handbücher

ZyXEL Communications

ZyXEL Communications Multy Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 128L Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EXTRASMART ES-1528 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 202H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660RU-Tx v3 SERIES Handbuch

ZyXEL Communications

ZyXEL Communications P-2602R-DXA - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 643 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8924-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 642M series Beilage

ZyXEL Communications

ZyXEL Communications Prestige 480 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PES-1014 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NR2301 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1200 SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 782R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-663H-51 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications GS1920 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications O2 HomeBox Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WT Handbuch

ZyXEL Communications

ZyXEL Communications VMG8825-B Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602H-D1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602R-D1A Handbuch

ZyXEL Communications

ZyXEL Communications P-660RU-T1 v3s Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung