ZyXEL Communications Nwa1100-n Bedienungsanleitung

www.zyxel.com

Quick Start Guide

NWA1100-N

802.11b/g/n PoE Access

Point

Firmware Version 1.00

Edition 1, 3/2011

DEFAULT LOGIN DETAILS

IP Address http://192.168.1.2

Username admin

Password 1234

CONTENTS

ENGLISH 3

DEUTSCH 15

ESPAÑOL 29

FRANÇAIS 42

ITALIANO 56

РУССКИЙ 70

SVENSKA 84

简体中文 96

繁體中文 108

2011 ZyXEL Communications Corporation

Panels

Overview

This Quick Start Guide shows how to set up and configure the

NWA1100-N (marked Zin the figure) to allow wireless clients to securely

access your wired network. See your User’s Guide for more information.

You may need your Internet access information.

To set up your wireless network you need to:

• Connect the Hardware

• Access the Web Configurator

• Configure the NWA1100-N

• Install the Hardware

• Set Up Power over Ethernet (Optional)

ENGLISH

Connect the Hardware

1. Using the Ethernet cable, connect the ETHERNET port to a computer

for initial configuration.

2. Connect the POWER 12VDC socket to a power source using only the

included power adaptor.

Connect the NWA1100-N’s ETHERNET port to an Ethernet jack with network

access after you have completed the initial configuration.

LEDs

•TheSYS LED blinks red, then turns steady green when the power is

connected.

• One of the LEDs by the ETHERNET port turns on if the port is

properly connected, and blinks when there is traffic. The yellow light

shines if the connection is at 1000 Mbps. The green light shines if

the connection is at 10/100Mbps.

#If neither LED near the ETHERNET port turns on, check the cable

connections to the port. Ensure your computer’s network card is working

properly.

Access the Web Configurator

Internet Explorer 6.0 and later versions, with JavaScript enabled, or Mozilla Firefox

3 and later versions or Safari 2.0 and later versions.

Set Up Your Computer’s IP Address

Note down your computer’s current IP settings before you change them.

First, set your computer to use a static IP address in the 192.168.1.3 -

192.168.1.254 range with a subnet mask of 255.255.255.0. This ensures

that your computer can communicate with your NWA1100-N. See your

User’s Guide for information on setting up your computer’s IP address.

Log Into the Web Configurator

Even though you can connect to the NWA1100-N wirelessly, it is recommended

that you connect your computer to the ETHERNET port for initial configuration.

1. Launch your web browser. Enter

192.168.1.2 (the NWA1100-N’s

default IP address) as the

address.

#If you cannot access the Web configurator, make sure the IP addresses and

subnet masks of the NWA1100-N and the computer are in the same IP

address range.

2. Enter admin (the default

username) in the Username field

and 1234 (the default password) in

the Password field. Click Login.

3. Change the login password by

entering a new password and

clicking Apply. Be sure to record

the new password and keep it in a

safe place.

#If you change the password and then forget it, you will need to reset the

NWA1100-N. Refer to the User’s Guide for how to use the RESET button.

Configure the NWA1100-N

Configure System Settings

1. Click SYSTEM in the navigation panel.

2. The SYSTEM > General screen appears.

• System Name is for identifying the NWA1100-N on your network.

Choose a distinctive name, or leave this at its default.

4. The STATUS screen appears.

• You can configure the Ethernet port speed and duplex in the

Ethernet Data Rate field. If you are not sure, select Auto.

3. Click Apply.

Configure Wireless Settings

1. Click WIRELESS in the navigation panel. The Wireless Settings

screen displays. Configure the basic settings for your wireless

network.

The wireless stations and the NWA1100-N must use the same SSID, channel ID

and encryption settings for wireless communication.

• Operation Mode: Ensure that Access Point mode is selected.

• Wireless Mode: Select the wireless standard you want your

network to use. If you are not sure which to select, select 802.11b/

g/n.

• SSID Profile: Select the SSID profile you want to configure for

network access from the drop-down list box.

• Channel: Select the wireless channel you want your network to

use.

• Channel Width: Select the channel bandwidth you want to use. If

you are not sure, select 20/40 MHz.

2. Click Apply to save your settings.

3. Click the SSID tab. If you want to configure advanced settings of an

SSID profile (such as change the profile name, SSID, or security),

select it and click Edit.

1010

4. Click the Security tab. Select the profile you want to configure and

click Edit.

5. The edit screen of the selected security profile appears. If you don’t

configure wireless security, anyone can access your network.

• This is where you can enter the security settings for your wireless

network. The fields you fill in differ according to the type of security

you select in the Security Mode field. Select None if you do not

wish to use wireless security.

• This example uses WPA2-PSK security, in which all wireless clients

must use the same pre-shared key to join the network.

• Ensure that all your wireless clients support the type of security you

set. Click Apply when you have finished.

#If the wireless clients cannot communicate with the network, ensure that the

clients and the NWA1100-N are using the same wireless security settings.

Andere Handbücher für nwa1100-n

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications Drahtloser Zugangspunkt Handbücher

ZyXEL Communications

ZyXEL Communications NWA1120 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR B-5000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5160N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA1300-NJ - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA50AX Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-570S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA450 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5120 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR X1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 100-NH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA3560-N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VES-1616PE-54 Handbuch

ZyXEL Communications

ZyXEL Communications WAC6552D-S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NAP102 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA-1100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA-1100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WRE6606 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA3000-N Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications HD Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-3000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA 1121-NI - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-570U Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

ZyXEL Communications nwa1100-n Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken