ZyXEL Communications NWA1300-NJ - Bedienungsanleitung

www.zyxel.com

NWA1300-NJ

802.11 b/g/n In-wall PoE Access Point

Firmware Version 1.00

Edition 1, 03/2011

DEFAULT LOGIN DETAILS

User Name admin

Password 1234

CONTENTS

ENGLISH 3

DEUTSCH 13

ESPAÑOL 23

FRANÇAIS 33

ITALIANO 43

РУССКИЙ 53

SVENSKA 63

简体中文 73

繁體中文 81

2011 ZyXEL Communications Corporation

ENGLISH

Device Panels

LEDs

Ethernet

Port

Phone

Port

Ethernet

Port

Phone

Port

Reset Button

ENGLISH

Package Contents

Single-Unit Package

• One NWA1300-NJ

• One Quick Start Guide

• One Support CD

• One Ethernet Cable

• One Telephone Cable

• One In-wall Installation Kit

• Two Brackets

• Two M3 Tapping Screws

and Washers

• One Wall Faceplate

• One Cover Faceplate

Eco Package

• Ten NWA1300-NJs

• One Quick Start Guide

• One Support CD

• Ten In-wall Installation Kits

ENGLISH

Hardware Installation

1. Slide the included

brackets to align with

screw holes on the top

and bottom of the

NWA1300-NJ. Use the

included M3 tapping

screws and washers to

secure the brackets to

the NWA1300-NJ.

There are three screw

holes on the bracket, which

allow you to adjust the

NWA1300-NJ’s depth in the wall.

2. Slide the

NWA1300-NJ into

the wall faceplate.

Align the screw

holes on the

brackets with the

faceplate’s screw

holes.

The distance between

the two screw holes of

the faceplate is 60 mm.

ENGLISH

3. Unplug the phone

or networking

device from the

existing wall outlet

if any. Remove the

outlet from the

wall.

The recommended

telephone wall outlet

dimensions are 72.60

mm by 72.60 mm by

48.40 mm.

4. Through the wall,

connect the

Ethernet cable

from a PoE switch

to the RJ-45 port

and the telephone

cable from a

telephone

switchboard (if

available) to the

RJ-11 port on the

back of the

NWA1300-NJ.

5. Install the

NWA1300-NJ in

the wall outlet box.

Fasten two screws

to secure the

NWA1300-NJ onto

the wall or

baseboard with

screws.

6. Attach the cover

faceplate. Press

gently but firmly

until the faceplate

clicks into place.

ENGLISH

Check the LEDs

Look at the LEDs (lights) on

the front panel of the

NWA1300-NJ.

The PWR/SYS and ETHN

LEDs stay on during start-up

and turn off once the

NWA1300-NJ is ready.

 If no lights are on when

the system starts up,

check your

connections. Make

sure the NWA1300-NJ is receiving power from a

PoE switch. Turn the NWA1300-NJ off by

disconnecting the Enternet cable to the PoE

switch, wait for a few seconds and connect the

Ethernet cable to turn it back on. If the LEDs are

still off, contact your local vendor.

Managing Your NWA1300-NJ

After you have installed the NWA1300-NJ in the wall

and connected it to a PoE switch, you can use its Web

Configurator or an Enterprise Network Center (ENC) to

configure the NWA1300-NJ.

To use the Web Configurator, attach a computer (A) to

the Ethernet port on the NWA1300-NJ’s front panel or

wirelessly connect to (B) each NWA1300-NJ for

individual configuration. The NWA1300-NJ’s WAN port

is set to DHCP client mode by default. Connect a router

with DHCP server enabled (R) to assign the NWA1300-

NJ an IP address.

It’s recommended that you use the Enterprise Network

Center (ENC) to provision and manage the NWA1300-

NJ. See your ENC’s documentation for detailed

instructions.

ENGLISH

Accessing the Web Configurator

Before you can configure the NWA1300-NJ using it’s

web configurator, make sure your computer is set to get

an IP address and DNS server information

automatically from a DHCP server.

See the User's Guide on the CD or www.zyxel.com for

more information.

1. Open a web browser on your computer, check your

DHCP server and enter the NWA1300-NJ’s IP

address assigned by the DHCP server (192.168.1.2

for example) as the address.

2. Enter the

username admin

and password

1234 (default).

Click Submit.

 If the login screen does not open, make sure you

allow web browser pop-up windows, JavaScripts

and Java permissions.

3. The main screen displays.

Setting Up Your Wireless Security

There is no

wireless

security

enabled on the

NWA1300-NJ

by default. If

you do not set

wireless

security,

anyone within transmission range could use your

NWA1300-NJ to access your network and the Internet.

See the User’s Guide for how to configure wireless

security settings.

Connecting to the NWA1300-NJ Wirelessly

Manually configure wireless clients to join the

NWA1300-NJ’s wireless network. If you didn’t configure

the NWA1300-NJ’s wireless settings, use the default

wireless SSID (network name) “ZyXEL”.

Andere Handbücher für NWA1300-NJ -

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications Drahtloser Zugangspunkt Handbücher

ZyXEL Communications

ZyXEL Communications ZyAIR B-5000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nwa1100-n Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-3000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA3550-N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nwa series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VES-1616PE-54 Handbuch

ZyXEL Communications

ZyXEL Communications nwa series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-3202HN-Ba Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA-3550 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5160N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G570S V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA1120 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA90AX Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAX510D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA3000-N Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-3000H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA-1100 - V1.00 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA 1121-NI - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5160N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications HD Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5121-N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWA5120 Series Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung