ZyXEL Communications 3G Wireless Router NBG410W3G Bedienungsanleitung

NBG410W3G Series

3G Wireless Router

Quick Start Guide

Version 4.03

05/2008

Edition 1

DEFAULT LOGIN

IP Address http://192.168.1.1

Password 1234

CONTENTS

ENGLISH 3

DEUTSCH 15

ESPAÑOL 29

FRANÇAIS 41

ITALIANO 53

РУССКИЙ 65

繁體中文 77

ENGLISH

Overview

With the NBG41xW3G you can do the following.

• Use a 3G connection to access the Internet from any location with 3G coverage (A).

• Set up a secure Wi-Fi IEEE 802.11b/g wireless network (B).

• Enjoy added security with an advanced firewall (C).

This guide shows you how to do the following.

See the User’s Guide for more information on all features.

Before you begin check your ISP (Internet Service Provider) or network administrator has

provided you the following:

1Connect your hardware (page 4)

2Access the NBG41xW3G from your computer (page 5)

3Set up a 3G connection (page 7)

4Set up a wireless network (page 8)

5Access the Internet (page 11)

For 3G Internet access you need an activated

3G user account, and a 3G SIM card and

Internet access information for your 3G

account.

For wired Internet access you need the

Internet access information provided to

you by your ISP.

Internet

WLAN 3G

ENGLISH

1 Hardware Connections

Do the following to make hardware connections for initial setup.

1 Antenna: Connect the antenna to the antenna socket, ensuring the antenna is screwed

in firmly and pointing upwards.

23G:Before inserting the SIM card (only NBG410W3G) or 3G dongle, ensure POWER is

disconnected. Insert the 3G SIM card and/or 3G dongle given to you by your ISP or

network administrator, as shown in the figure.

3WAN: Use an Ethernet cable to connect the WAN port on your NBG41xW3G to the

Ethernet port on your Internet access device (for example, a router or modem).

4LAN(1~4): Use the included Ethernet cable to connect the Ethernet port on your computer

to a LAN port on the NBG41xW3G.

5POWER: Use the power adapter from the package to connect the POWER socket to an

appropriate power source.

Internet

NOT IN

NBG412W3G

ENGLISH

Look at the LEDs (Lights)

•ThePOWER ( ) light blinks during start-up and stays green once the NBG41xW3G is

ready.

•TheLAN ( ) and WAN ( ) lights turn on and stay on if the corresponding con-

nections are properly made.

•TheWLAN ( ) light turns steady green when the built-in Wi-Fi feature is enabled.

•The3G OPERATION ()light turns on when a 3G connection is made and the 3G SIG-

NAL STRENGTH ( ) light indicates the signal strength. See the User’s Guide for more

information on these lights.

VCheck your connections if the power ()or LAN ()light does not

turn on. If this doesn’t help, disconnect the NBG41xW3G from its power

source, wait for a few seconds and then reconnect the power.

2 Access the NBG41xW3G from Your Computer

Use the NBG41xW3G’s web configurator to configure settings on the NBG41xW3G.

1Launch a web browser (such as Internet

Explorer). Enter the NBG41xW3G’s

default IP address, http://192.168.1.1,

and press [ENTER].

2Click Login (the default password 1234

is already entered).

ENGLISH

VIf the login screen does not display, make sure your computer is set to

receive an IP address dynamically. If that doesn’t help, check your web

browser’s security settings (see the User’s Guide for information on both

suggestions)

3Change the login password by entering a

new password and clicking Apply. Then log

in again with your new password..

4A unique certificate is important for

network security. Click Apply to replace

the NBG41xW3G’s default certificate..

5The HOME screen

appears.

Congratulations, you have connected the NBG41xW3G to your computer. You are now

ready to configure 3G (page 7), Wi-Fi settings (page 8) or wired Internet access settings

(page 11) on the NBG41xW3G.

ENGLISH

3 Set Up a 3G Connection

This section shows you how to quickly configure and set up a 3G connection on the

NBG41xW3G. Leave any settings not mentioned at their default values or see the User’s

Guide for more information.

You should have ready the Internet access information for your activated 3G user account.

1Click WIRELESS > 3G (WAN 2) in the NBG41xW3G’s navigation

menu.

2Select Enable.

3Check your device is set to the

correct 3G Interface.

4Type the access point name

given to you by your 3G service

provider in the Access Point

Name (APN) field.

5If your 3G service provider

gave you a user name and

password, select CHAP/PAP in

the Authentication Type field

and enter the user name and

password in the fields below.

Otherwise, set the

Authentication Type to None.

6If your 3G service provider

gave you a PIN code, type it in

the PIN Code field.

7Type the phone number given to you by your 3G service provider in the Phone Number

field.

8If your service provider gave you an IP address for a 3G connection, select Use Fixed

IP Address and enter it in the My WAN IP Address field. Otherwise, select Get

Automatically from ISP.

9Ensure Enable NAT is selected and click Apply.

ENGLISH

Congratulations, you have set up your 3G Internet access. Open a web browser such as

Internet Explorer and browse to your favorite website.

VIf you cannot connect to the Internet with your 3G connection, check your

3G connection status in the HOME screen. If your 3G connection status is

down, check your 3G settings are correctly configured and the SIM card is

correctly inserted. See the User’s Guide for more suggestions.

4 Set Up a Wi-Fi Wireless Network

This section shows you how to configure wireless settings on your NBG41xW3G, then how

to connect a wireless device, such as your laptop, to your wireless network.

4.1 Configure Wireless Settings on the NBG41xW3G

1Click WIRELESS > Wi-Fi in the NBG41xW3G’s navigation menu.

2To apply wireless security, click

the Security tab. Then click the

Edit ( ) icon.

It is strongly recommended you

apply wireless security!

3Click the Security Mode drop-

down list. The drop-down list

displays the security methods in

increasing order of strength.

Select the highest level of security

supported by the other devices on

your wireless network.The recommended level of security for a typical home network is

WPA2-PSK. Choose WPA2-PSK-MIX if some devices on your network support WPA2-

PSK and others support WPA-PSK.

ENGLISH

4If you choose WPA(2) or WPA(2)-

PSK, type a Pre-Shared Key

using 8~63 English upper or

lower case letters (A~Z, a~z) or

numbers (0~9).

5Write it down as you will need it

later to connect your computer to

the wireless network.

6Click Apply.

7Click on the Wireless Card tab to

show the following screen.

8Select Enable Wireless Card.

9Leave other settings at their

defaults to quickly set up a

wireless network. See the User’s

Guide for detailed information on

these fields.

10 Click the Edit ( ) icon.

11 SSID: Enter a unique network

name for the wireless network.

12 Security: Select the security

setting you set up in the WiFi >

Security screen.

13 Leave other settings at their

defaults to quickly set up a

wireless network. Otherwise, see

the User’s Guide for detailed information on these fields. Click Apply and then click

Apply in the Wireless Card screen.

Congratulations, you are now ready to connect a wireless device such as your notebook to

your wireless network.

Write down the Pre-Shared Key!

ENGLISH

4.2 Connect Your Computer to the NBG41xW3G Wirelessly

You can now connect wirelessly to your NBG41xW3G from your computer and access the

Internet. You will need the Network Name (SSID)and also the Pre-Shared Key if you set

up security in the previous section. The connection procedure is shown here using

Windows XP as an example.

1Right-click the wireless adapter icon which appears in

the bottom right of your computer monitor. Click View

Available Wireless Networks.

2Select the SSID name you gave the

NBG41xW3G and click Connect (A).

The SSID “SecureWirelessNetwork”

is given here as an example.

3If you have set up wireless security,

you are prompted to enter a password.

Enter the Pre-Shared Key you set up in the

previous section and click Connect (B).

4You may have to wait several minutes while

your computer connects to the wireless

network.

5You should now be securely connected

wirelessly to the NBG41xW3G.

Congratulations! You are now ready to connect to the Internet wirelessly

through your NBG41xW3G.

Andere Handbücher für 3G Wireless Router NBG410W3G

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-320W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG 5715 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-310N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FSG1100HN Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX208M2W SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nbg334s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE5388-M804 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-334SH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG334W Referenzhandbuch

ZyXEL Communications

ZyXEL Communications MWR102 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG7815 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-418N v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG 5715 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Multy U WSR30 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR G5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-420N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications X150N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WAH7003 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications CellPipe 7130 RG Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4115 - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU(L)-FxF Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7461-M602 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung