ZyXEL Communications NBG318S Series Bedienungsanleitung

NBG-318S

Super G Wireless HomePlug AV Router

Quick Start Guide

Version 3.60

6/2007

Edition 1

DEFAULT LOGIN

IP Address http://192.168.1.1

User Name admin

Password 1234

CONTENTS

ENGLISH 2

DEUTSCH 14

ESPAÑOL 28

FRANÇAIS 42

ITALIANO 56

SVENSKA 70

ENGLISH

Overview

The NBG-318S is a wireless broadband router compatible with IEEE 802.11b/g and Super

G wireless devices. It also includes a HomePlug AV powerline adapter which allows you to

set up a network on your existing electrical wiring.

This Quick Start Guide shows you the following:

1Connecting your Hardware

2Accessing the Web Configurator

3Connecting to the Internet Using the Wizard

4Configuring your Wireless Settings

5Setting up a HomePlug AV Powerline Network

6Troubleshooting

See your User’s Guide on the CD in the package for more information on all features.

To read the User’s Guide insert the CD that came in the box into your CD-ROM drive. A

screen should pop up. Navigate to the User’s Guide from this screen. If a screen does not

pop up, open Windows Explorer (click My Computer), click on the CD-ROM drive (usually

drive D:) and navigate to it from there.

ENGLISH

1 Hardware Connections

Do the following to make hardware connections for initial setup.

WAN

Connect your modem to the WAN port using the cable that came with your

modem.

LAN

Connect your computer to a LAN port using the yellow Ethernet cable from the

package.

POWER Connection

Use the power cord from the package to connect the POWER socket to an appro-

priate power source. This is also your powerline connection.

The LEDs

Look at the LEDs (lights). When you connect the power, the POWER ( ) LED blinks and

stays on once the device is ready.

The LAN ( ) LEDs turn on if the LAN connections are properly made.

ENGLISH

VCheck your connections if an LED does not turn on. If this doesn’t help,

disconnect the NBG-318S from its power source, wait for a few seconds and

turn it back on.

2 Accessing the Web Configurator

Default Login Information

1Launch an Internet browser such as Internet Explorer. Enter “http://192.168.1.1” as

shown below.

2The Password window displays. Enter the password (“1234” is the default) and click

• If the Password window does not display, see Troubleshooting for suggestions.

3Change the password in the screen that follows and click Apply.

IP address http://192.168.1.1

administrator password 1234

ENGLISH

4Click Go to Wizard setup to set up your NBG-318S for the first time.

3 Connection Wizard Setup

1Choose your language from the drop-down list box. Click Next.

2Click Next in the following screen to proceed with the Connection Wizard.

"Enter the Internet access information exactly as given to you by your ISP in

each wizard screen. Click Next to continue or click Back to return to the

previous screen. Current screen information will be lost if you click Back.

3.1 System Information

This screen is optional. You can just click Next.

ENGLISH

3.2 Wireless LAN

Configure your NBG-318S to support a wireless network by following these steps.

1Enter a unique name to identify the NBG-318S on the wireless LAN.

2Select a wireless channel. The NBG-318S and the wireless client must use the same

channel.

3Select Auto to automatically use the WPA-PSK security standard, which provides a

high level of security. See your User’s Guide for information on other kinds of security.

Click Next.

4Write down the security key that displays in the pops-up screen. Wireless clients will need

this security key to access the NBG-318S. Click OK to continue.

"Write down the security key, Name (SSID), Security and Channel

Selection for later use as the NBG-318S and other devices on your

wireless network must use the same settings.

3.3 WAN Connection

1You may need to wait several minutes while the wizard attempts to detect which WAN

connection type (Ethernet, PPPoE or PPTP) you are using.

• If the wizard detects your connection type, follow the steps for your connection type as

given below.

ENGLISH

• If the wizard cannot detect a connection type, you must select your connection type from

the drop-down list box in the screen below. If you do not know what connection type to use,

check with your ISP.

"If you were given Internet access settings, type them in the following fields.

Otherwise leave the default settings and click Next.

Ethernet Connection

Select Ethernet as your WAN connection type and click Next to go to section 3.4.

PPPoE Connection

1Select PPPoE as your WAN connection type

2Type a Service Name (if your ISP gave you one), User Name and Password. Click Next

to go to section 3.4.

PPTP Connection

1Select PPTP as your WAN connection type.

ENGLISH

2Type a User Name and Password.

• If your ISP did not assign you a fixed PPTP IP address, select Get automatically from

ISP.

• If your ISP assigned you a fixed PPTP IP address, select Use fixed IP address to give the

NBG-318S a fixed, unique PPTP IP address and subnet mask.

3Type a PPTP Server IP Address.

4Type a Connection ID/Name (if provided by your ISP). Click Next to go to section 3.4.

3.4 WAN IP Address

• If your ISP did not assign you a fixed IP address, select Get automatically from your ISP

and click Next to go to section 3.5.

• If your ISP gave you a fixed IP address:

1Select Use fixed IP address provided by your ISP. Click Next.

2In the next screen type the WAN IP address, WAN IP Subnet Mask and the gateway IP

address given by your ISP.

If you are given DNS server settings, type them in the fields. Otherwise leave the default

settings and click Next.

ENGLISH

3.5 WAN MAC Address

1Configure the WAN port's MAC address by either using the factory assigned default

MAC address or cloning the MAC address of a computer on your LAN. By default, the

NBG-318S uses the factory assigned MAC address to identify itself on the WAN.

•SelectFactory Default to use the factory-assigned, default MAC address.

•SelectClone the Computer’s MAC Address to clone the MAC address from a computer

on your LAN. Type the IP address of the computer with the MAC address you are cloning. It

is advisable to clone the MAC address from a computer on your LAN even if your ISP does

not presently require MAC address authentication.

•SelectSet WAN MAC Address and enter the MAC address you want to use.

2Select Enable BM for all traffic automatically to have the NBG-318S apply bandwidth

management to traffic going out through any interface according to the traffic type.

Click Next.

3Click Apply to save your changes in the next screen that appears in the wizard.

If you have any Internet access problems, follow the on-screen instructions.

4Click Finish in the screen below to complete the wizard setup.

5Congratulations. Open a web browser, such as Internet Explorer, to visit your favorite

website.

4 Wireless Network Setup

Set up a wireless network with at least one other computer with a wireless network card/

adapter. To add a computer to your network, you need to configure your wireless-enabled

computer with the same SSID, channel and security settings as the NBG-318S. See the

note from section 3.

ENGLISH

1Open a wireless adapter utility such as the one shown below. The wireless utility on

your computer may be different from the one shown below.

2Locate your network’s name (SSID) and click Connect to add your computer to the

wireless network.

3Follow the instructions on your wireless utility. When finished, open your a browser

such as Internet Explorer to surf the Internet.

• For more information see the tutorial section in the User’s Guide.

5 HomePlug AV Powerline Network Setup

Follow these steps to set up your HomePlug AV network. You may remain connected to

any other networks such as a wireless network during this procedure.

1Connect your NBG-318S and other HomePlug AV powerline devices to power outlets

and turn them on.

2Log into the web configurator if you haven’t already logged in and go to Advanced setup.

Click on Network > HomePlug to begin setting up your network in the following screen.

3Set the name for your network in the Network Name section. The Network Name is

like a password for your network. A HomePlug AV adaptor can only access your

network if it has the correct Network Name.

•SelectPublic, Network Name is HomePlugAV to set your Network Name to the default

(HomePlugAV). Choose this option if you want to easily detect when a new HomePlug AV

device (with the default network name) is connected to your wiring, without having to

change its network password.

•SelectPrivate, Network Name is and type a Network Name if you want to make your net-

work more secure by changing the default Network Name to one that only you know.

Andere Handbücher für NBG318S Series

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications P-660HN-T1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-510S Montageanleitung

ZyXEL Communications

ZyXEL Communications NBG-4615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX208M2W SERIES Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR G5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications X-550N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications C2100Z Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MWR222 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU-Fx Series Handbuch

ZyXEL Communications

ZyXEL Communications NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-61 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4115 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6716 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HW Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-4615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MWR102 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications X150N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 153X Betriebsanleitung

ZyXEL Communications

ZyXEL Communications NBG5615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung