ZyXEL Communications P-2612HW Series Bedienungsanleitung

www.zyxel.com

802.11g Wireless ADSL VoIP IAD

Firmware v3.70

Edition 1, 12/2008

P-2612HW-F1

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

Username: admin

Password: 1234

ZyXEL Communications Corporation

Device Panels

WLAN

BUTTON POWER

LED ADSL

LED WAN

LED PHONE 1, 2

ON/OFF

RESET

POWER

ETHERNET

PORTS

LEDS

INTERNET

LED

WLAN

LED

ETHERNET

LED

PHONE

PORTS

DSL/WAN

WAN

PORT

DSL

PORT

ENGLISH

Overview

The P-2612HW-F1 is a router which combines high-speed ADSL

Internet access, a built-in switch, a firewall and high-speed wireless

networking capability. It also has a phone port for making calls over the

Internet (Voice over IP or VoIP).

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with

JavaScript enabled.

See the User’s Guide for all configuration details including file sharing

and setting up a shared printer.

To read the User’s Guide insert the CD that came in the box into your

CD-ROM drive. A screen should pop up. Navigate to the User’s Guide

from this screen. If a screen does not pop up, open Windows Explorer

(click My Computer), click on the CD-ROM drive (usually drive D) and

navigate to it from there.

ENGLISH

Hardware Connections

Remove the plastic cover from the P-2612HW-F1 before you

use it.

1. DSL: Use a telephone wire to connect this port to a telephone jack (or

the DSL or MODEM jack on a splitter, if you have one).

WAN: If you have a DSL router or modem already in your network or

you want to use a cable modem, push the DSL/WAN switch to the

WAN side and use an Ethernet cable to connect this port to an

Ethernet jack with Internet access.

2. ETHERNET: Use an Ethernet cable to connect a computer to one of

these ports for initial configuration and/or Internet access.

3. PHONE: Use a telephone cable (and any telephone adaptor provided

with your P-2612HW-F1) to connect a telephone to the PHONE 1 or

PHONE 2 port.

4. Use the power adaptor provided with your P-2612HW-F1 to connect

an appropriate power source to this socket.

5. Push the power button to the on position.

Look at the LEDs (lights) on the top panel of the P-2612HW-F1.

• The POWER light blinks during start-up and is green once the P-

2612HW-F1 is ready.

• Each ETHERNET light turns on if the corresponding ETHERNET

port is properly connected. The lights blink when the P-2612HW-F1

is sending or receiving data through the corresponding ETHERNET

port.

• The ADSL light stays on if a physical DSL connection exists and

blinks when transmitting data.

The WAN light stays on if this port is properly connected and blinks

when transmitting data.

The INTERNET light is green when Internet access is available.

• The PHONE lights stay on when your SIP account is registered and

they blink if the receiver is off the hook.

ENGLISH

• The WLAN light stays green when the wireless LAN is ready. It

blinks when the P-2612HW-F1 is sending/receiving data through

the wireless LAN.

If the PHONE light is on, skip to Using the Phones on page 16 to see

how to make calls through the Internet.

 If none of the LEDs (lights) are on, check your connections.

Make sure that you have the power adaptor connected to the

P-2612HW-F1 and plugged into an appropriate power

source. Make sure the power source is turned on. Turn the

P-2612HW-F1 off, wait for a few seconds and turn it back on.

If the LEDs are still off, contact your local vendor.

Wizard Configuration

• If the INTERNET light is green, skip to Set Up a Wireless Network

on page 11.

• If the DSL/WAN switch is set to DSL and the DSL light is on but the

INTERNET light is off; use this section to configure your Internet

access settings. If the

• If the DSL/WAN switch set to WAN and the WAN light is on but the

INTERNET light is off; see your User’s Guide for how to use the

Network > WAN screen to set up the Ethernet WAN connection.

1. Open your browser and enter http://192.168.1.1 (the P-2612HW-F1's

default IP address) as the address.

2. For administrator login, enter username admin and password 1234

(default). Only administrators can configure the SIP account settings.

For user login, enter user as both the username and password. Click

ENGLISH

 If the login screen does not open, make sure you allow web

browser pop-up windows, JavaScripts and Java

permissions. Your computer should be also set to get an IP

address automatically from a DHCP server. See the

appendices in your User’s Guide for more information.

3. In the Status screen, click the Wizard icon ( ) in the upper right

corner.

Internet/Wireless Setup

Enter the Internet access information exactly as given to you by your ISP

in each wizard screen and then click Next to continue or click Back to

return to the previous screen. Current screen information is lost if you

click Back.

1. Click INTERNET/WIRELESS SETUP.

2. Wait while the P-2612HW-F1 tries to detect your Internet connection.

If the P-2612HW-F1 cannot detect it, follow the directions in the

screen. Enter the information provided by your ISP. Keep the default

settings if your ISP did not provide some information.

3. See the back panel for the P-2612HW-F1’s unique wireless SSID

(network name) and WPA-PSK encryption key. Unless you want to

use other wireless settings, you can close the wizard after you

configure the Internet connection.

To configure your wireless clients to connect to the P-2612HW-F1, see

Set Up a Wireless Network on page 11.

4. When your Internet connection is setup correctly, the DSL and

INTERNET lights should be green. When you are finished click

Return to Wizard Main Page.

 If you cannot access the Internet and the INTERNET light is

red, make sure you enter the correct information in the

INTERNET/WIRELESS SETUP wizard screens. If you are

using a new Internet account, contact your ISP to make sure

it is active. If you are trying to access the Internet wirelessly,

make sure the wireless and security settings in your wireless

client are the same as the settings in the P-2612HW-F1.

Andere Handbücher für P-2612HW Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications VMG8924-B30A Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-200M1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE5366 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2612HNU(L)-FxF Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications WSR30 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nbg334s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6616 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-4615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VSG-1200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 153 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-416N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W - V1.90 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-415N - V1.00 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-510S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-4615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-330W Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung