ZyXEL Communications P-2302HWL-P1 Bedienungsanleitung

ZyXEL Confidential

360AJB0C1.rtf 1/36

ZyXEL

Firmware Release Note

P-2302HWL-P1

Standard Version

Release 3.60(AJB.0)C1

Date: September 9, 2006

Author: Chun Hsing Chien

ZyXEL Confidential

360AJB0C1.rtf 2/36

ZyXEL P-2302HWL-P1 Standard Version

Release 3.60(AJB.0)C1

Release Note

Date:September 9, 2006

Supported Platforms:

ZyXEL P-2302HWL-P1

Versions:

ZyNOS Version: V3.60(AJB.0) | 09/08/2006 17:21:22

Bootbase Version: V1.03 | 04/10/2006 11:52:50

Notes:

1. Bootbase version V1.03.

2. Support Trunking. (DTMF Mode=SIP_INFO and Compression Type codec=G.729)

3. Support No Not Disturb.

4. Support Bandwidth Management.

5. Support 802.11BG mode.

6. Support Multiboot 2.3

7. Enable quick route by default.

Known Issues:

1. Packet interval for both G.711 and G.729 is irregular.

2. Trigger port can't work if enable firewall.

3. On Consultative Transfer, when DUT-A transfer to DUT-C, it generates noise.

4. Don’t support Web Help at this moment.

5. Sometimes Blind Transfer got failure.

6. DUT can't send/receive FAX through VoIP call with Cisco T.38 gateway.

7. Intel Wireless 3945ABG (V10.1.1.3) can’t associate with DUT successfully when

DUT change 802.11 mode from 802.11g to 802.11b.

8. The Bandwidth Management's Fairness-Based don't work on LAN and WAN and

WLAN interface.

9. Audio of windows Live messenger don't establish session.

Features:

Modification in V 3.60(AJB.0) | 09/08/2006

1. Change default setting to fix REN issue.

 First Ringing Timeout to 200 msec.

 Caller ID Ring Timeout to 500 msec.

Modification in V 3.60(AJB.0) | 08/09/2006

2. Change to FCS version.

ZyXEL Confidential

360AJB0C1.rtf 3/36

Modification in V 3.60(AJB.0)b8 | 08/04/2006

[Bug Fix]

3. [SPR: 060713764] Sometimes DUT can not receive alerting tone when hop off with

Auto Attendant.

4. [SPR: 060713765] Sometimes DUT can not receive alerting tone when hop on with

Auto Attendant and DUT will reboot abnormally.

5. [SPR: 060728931] UPnP device name is incorrect.

Modification in V 3.60(AJB.0)b7 | 07/26/2006

[Bug Fix]

1. [SPR: 060711581] Wizard spoof WAN MAC address problem.

2. [SPR: 060712677] Failure rate is too high when test Continuous VoIP call with G.711

Codec by using SIP1 account with data traffic.

3. [SPR: 060718151] Can't enable "Maximize bandwidth usage" of Bandwidth MGMT

on WAN interface.

4. [SPR: 060718153] Don't Modify and disable service at Wizard .

5. [SPR: 060718155] Using BM Wizard to create subclass and delete, the default class

quantity will not increase.

6. [SPR: 0607181601] Sometimes occur to lose DTMF key in Taiwan's phone.

Modification in V 3.60(AJB.0)b6 | 07/07/2006

[Bug Fix]

1. [SPR: 060413901] DUT hang up frequently during FW testing.

2. [SPR: 060503168] IGMP-V2 don't work correctly

3. [SPR: 060313996] Voice quality is very poor with G.729 and G.711 Codec when

sending heavy traffic on LAN port.

4. [SPR: 060413890] Packets can not send and receive after Long VoIP conversation.

5. [SPR: 060413858] SmartBit throughput test got failure.

6. [SPR: 060314078] When DUT power on, PSTN phone will be dropped.

7. [SPR: 060502043] Trigger port can't work rule2 ~ rule12.

8. Remove Help Icon temporarily since there P2302HWL does not support Web Help at

this moment.

Modification in V 3.60(AJB.0)b5 | 04/27/2006

[Bug Fix]

9. [SPR: 060310918] Remove Preamble configuration in GUI.

10. [SPR: 060313994] Load default configuration from e/WC, Wireless security="Static

WEP" and passphrase=1, then you will see the channel change to ch1.

11. [SPR: 060313996] The "passphrase" and "generate button" are not grayed when

security mode is WEP Encryption to 256bit.

12. [SPR: 060411652] The picture of Internet Detection don't display in Wizard.

13. [SPR: 060411647] Wireless Security item "802.1x" should be removed in GUI.

14. [SPR: 060412804] After doing Blind Transfer, DUT-A generate dial tone with noise

in background.

15. [SPR: 060412739] Exception will happen while we change the wireless setting from

WPA-PSK to WPA.

16. [SPR: 060412674] The LED of "Internet" doesn't meet the PS definition.

ZyXEL Confidential

360AJB0C1.rtf 4/36

17. [SPR: 060413892] Don't make call after unplug DUT WAN cable during ringing on

VoIP call

18. [SPR: 060413856] In debug mode: ATBR failed to restore to default setting. It needs

to re-upload the RAS code.

19. [SPR: 060413899] Disable CallerID, DUT can not terminate a VoIP call.

20. [SPR: 060413903] DUT work as bridge during initial boot up process.

21. [SPR: 060413904] DUT maintain only one STUN setting in SIP1, change any setting

on SIP1's STUN setting will affect SIP2's stun setting.

22. [SPR: 060310898] On PPPoE connection mode to configure First DNS server from

ISP to none and Second DNS server from none to ISP, all traffic can't go out.

23. Turn on watch dog timer by default.

24. DUT can not work properly when entering a flash key during a PSTN call.

Modification in V 3.60(AJB.0)b4 | 04/10/2006

[Bug Fix]

25. [SPR: 060310913] OTIST function can not work properly.

26. [SPR: 060309829] IGMP-v1 does not work.

27. [SPR: 060309830] IGMP-v2 does not work.

28. [SPR: 060328365]WAN don't get IP address from DHCP server when enable Spoof

WAN MAC address

29. Remove 802.11a function in GUI.

30. Extend ROM file to 112 Kbytes. (Please update bootbase.bin and restore to default

setting)

31. [SPR:060314080]DTMF lost on PSTN call.

Modification in V 3.60(AJB.0)b3 | 03/30/2006

[Bug Fix]

32. [SPR: 060310913] OTIST function can not work properly.

33. [SPR: 060309829] IGMP-v1 does not work.

34. [SPR: 060309830] IGMP-v2 does not work.

35. [SPR: 060328365]WAN don't get IP address from DHCP server when enable Spoof

WAN MAC address

Modification in V 3.60(AJB.0)b2 | 03/26/2006

[Bug Fix]

36. [SPR: 060308696] Can not get the WAN MAC Address

37. [SPR: 060308702] Step1: Edit Web/Go Wizard setup/Apply/Connection Wizard

Step2: WAN MAC address/Choose "Spoof this computer's MAC

address"/IP address =192.168.1.33/Next/Apply. Message : Can not get the WAN MAC

Address

38. [SPR: 060309826] Bandwidth Management can't work.

39. [SPR: 060309827] SNMP can't work on GUI.

40. [SPR: 060310910]The default "setup key" of OTIST is "01234567" , not null

41. [SPR: 060310912]From the wizard, configure wireless security mode =auto and

enable OTIST function and setup key="01234567", after all process finished , the

OTIST count down page only show 1 sec. In general, it counts down from 180 sec.

42. [SPR: 060310913]From the wizard, configure wireless security mode =auto ,enable

ZyXEL Confidential

360AJB0C1.rtf 5/36

OTIST function and setup key="01234567",after OTIST count down page ,all

process finished, configure wireless setting from Network/wireless , it will show the

message" Auto Security in process ,but I think the OTIST function doesn't work well

43. [SPR: 060310916]Can't keep the 802.11a mode after device reboot.

44. [SPR: 060310917]Channel change cause to wireless mode change.

45. [SPR: 060310919]Ethernet PC can't ping to DUT.

46. [SPR: 060313985]"Reset" button can't work in GUI.

47. [SPR: 060313990]Ethernet PC can't ping to DUT.

48. [SPR: 060313997]Load default first, from e/WC, Network/Wireless, configure

wireless security=WPA ,802.1X or WPA2 ,one wireless station connect to

DUT,when configure any setting ,device exception.

49. [SPR: 060313003]802.11a mode can't work well.

50. [SPR: 060314056]802.11a and 802.11g all can't pass PQA criteria .

51. [SPR: 060314074]Voice quality is very poor with G.711 codec on Phone 1.

52. [SPR: 060314075]DTMF lost with SIP INFO mode on codec is G.729 and G.711.

53. [SPR: 060314077]DUT can't display CLID from PSTN CO simulator.

54. [SPR: 060314079]DUT can't receive FAX through G.729 codec.

55. [SPR: 060314080]DTMF lost on PSTN call.

56. [SPR: 060314081]DUT receive two kinds of busy tone when dial own PSTN number

and disable Trunking.

57. [SPR: 060314083]DUT don't generate secondary dial tone when DUT-A press

FLASH after DUT-A and DUT-B are in conversation.

58. [SPR: 060314084] “hop on” with Auto Attendant can not work correctly.

59. [SPR: 060314085] “hop off” with Auto Attendant can not work correctly.

60. [SPR: 060309829] IGMP-v1 does not work.

61. [SPR: 060309830] IGMP-v2 does not work.

Modification in V 3.60(AJB.0)b1 | 03/03/2006

First release for P2302HWL-P1 Standard Version

ZyXEL Confidential

360AJB0C1.rtf 6/36

Annex A CI Command List

Command Class List Table

System Related Command Exit Command Device Related Command

Ethernet Related Command POE Related Command PPTP Related Command

Configuration Related Command IP Related Command ppp

dsp voice

SystemRelatedCommand Home

Command Description

sys

adjtime retrive date and time from Internet

callhist

display display call history

remove <index> remove entry from call history

countrycode [countrycode] set country code

date [year month date] set/display date

domainname display domain name

edit <filename> edit a text file

extraphnum maintain extra phone numbers for outcalls

add <set 1-3> <1st phone num> [2nd phone

num] add extra phone numbers

display display extra phone numbers

node <num> set all extend phone number to remote node

<num>

remove <set 1-3> remove extra phone numbers

reset reset flag and mask

feature display feature bit

hostname [hostname] display system hostname

logs

ZyXEL Confidential

360AJB0C1.rtf 7/36

category

access [0:none/1:log/2:alert/3:both] record the access control logs

attack [0:none/1:log/2:alert/3:both] record and alert the firewall attack logs

display display the category setting

error [0:none/1:log/2:alert/3:both] record and alert the system error logs

ipsec [0:none/1:log/2:alert/3:both] record the access control logs

ike [0:none/1:log/2:alert/3:both] record the access control logs

javablocked [0:none/1:log] record the java etc. blocked logs

mten [0:none/1:log] record the system maintenance logs

upnp [0:none/1:log] record upnp logs

urlblocked [0:none/1:log/2:alert/3:both] record and alert the web blocked logs

urlforward [0:none/1:log] record web forward logs

clear clear log

mten|urlblocked|urlfor

ward]

display all logs or specify category logs

errlog

clear display log error

disp clear log error

online turn on/off error log online display

load load the log setting buffer

mail

alertAddr [mail address] send alerts to this mail address

display display mail setting

logAddr [mail address] send logs to this mail address

schedule display display mail schedule

schedule hour [0-23] hour time to send the logs

ZyXEL Confidential

360AJB0C1.rtf 8/36

schedule minute [0-59] minute time to send the logs

schedule policy

[0:full/1:hourly/2:daily/3:weekly/4:none] mail schedule policy

schedule week

[0:sun/1:mon/2:tue/3:wed/4:thu/5:fri/6:sa

weekly time to send the logs

server [domainName/IP] mail server to send the logs

subject [mail subject] mail subject

save save the log setting buffer

syslog

active [0:no/1:yes] active to enable unix syslog

display display syslog setting

facility [Local ID(1-7)] log the messages to different files

server [domainName/IP] syslog server to send the logs

log

clear clear log error

disp display log error

online [on|off] turn on/off error log online display

resolve Resolve mail server and syslog server address

mbuf

link link list system mbuf link

pool <id> [type] list system mbuf pool

status display system mbuf status

disp <address> display mbuf status

cnt

disp display system mbuf count

clear clear system mbuf count

debug [on|off]

ZyXEL Confidential

360AJB0C1.rtf 9/36

pwderrtm [minute] Set or display the password error blocking

timeout value.

load <entry no.> load remote node information

disp <entry no.>(0:working buffer) display remote node information

nat <none|sua|full_feature> config remote node nat

nailup <no|yes> config remote node nailup

mtu <value> set remote node mtu

save [entry no.] save remote node information

smt not support in this product

stdio [minute] change terminal timeout value

time [hour [min [sec]]] display/set system time

trcdisp monitor packets

trclog

trcpacket

syslog

server [destIP] set syslog server IP address

facility <FacilityNo> set syslog facility

type [type] set/display syslog type flag

mode [on|off] set syslog mode

version display RAS code and driver version

view <filename> view a text file

wdog

switch [on|off] set on/off wdog

cnt [value] display watchdog counts value: 0-34463

romreset restore default romfile

server

ZyXEL Confidential

360AJB0C1.rtf 10/36

load load server information

disp display server information

port <telnet|ftp|web|snmp> <port> set server port

save save server information

fwnotify

load load fwnotify entry from spt

save save fwnotify entry to spt

url <url> set fwnotify url

days <days> set fwnotify days

active <flag> turn on/off fwnotify flag

disp display firmware notify information

check check firmware notify event

debug <flag> turn on/off firmware notify debug flag

cmgr

trace

disp <ch-name> show the connection trace of this channel

clear <ch-name> clear the connection trace of this channel

cnt <ch-name> show channel connection related counter

socket display system socket information

filter

netbios

roadrunner

debug <level> enable/disable roadrunner service

0: diable <default>

1: enable

Andere Handbücher für P-2302HWL-P1

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications 3G Wireless Router NBG410W3G Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications C2100Z Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Multy X WSQ50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301-PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-4615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG8924-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Draft 802.11n Wireless Broadband 1-NBG-415N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-207HW2R Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7240-M403 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG318S Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG892-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2602HWUDL-D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications nbg334s Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG334W Handbuch

ZyXEL Communications

ZyXEL Communications LTE5121 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6815 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-460N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6815 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301 Series Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung