ZyXEL Communications VSG1432-B101 START V1.10 Bedienungsanleitung

el.com www.zyxel.com

802.11n Wireless VDSL2 4-port

Gateway

Firmware Version 1.10

Edition 1, 9/2010

VSG1432-B101 Series

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

User Name: admin

Password: 1234

ZyXEL Communications Corporation

Device Panels

POWER

ETHERNET 1-4

USB

WLAN/WPS

ETHERNET WAN

INTERNET

DSL WAN

POWER

ETHERNET 1-4

USB

DSL WAN

ETHERNET WAN

RESET

VSG1432-B101 Series

Overview

The VSG1432-B101 is a VDSL2 router and Gigabit Ethernet gateway

with a four-port built-in Ethernet switch and IEEE 802.11n wireless. The

VSG1432-B101 allows wired and wireless clients to safely access the

Internet. The built-in firewall blocks unauthorized access to your network.

The USB port allows you to connect USB memory stick or USB hard

drive for storing or sharing files through the network. Other helpful

features include Quality of Service (QoS) which allows time-sensitive

services and applications to flow more smoothly.

Safety Warnings

• Do NOT use this product near water, for example, in a wet

basement or near a swimming pool.

• Do NOT expose your device to dampness, dust or corrosive liquids.

• Do NOT store things on the device.

• Do NOT install, use, or service this device during a thunderstorm.

There is a remote risk of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do NOT open the device or unit. Opening or removing covers can

expose you to dangerous high voltage points or other risks. ONLY

qualified service personnel should service or disassemble this

device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them

or stumble over them.

• Always disconnect all cables from this device before servicing or

disassembling.

• Use ONLY an appropriate power adaptor or cord for your device.

• Connect the power adaptor or cord to the right supply voltage (for

example, 110V AC in North America or 230V AC in Europe).

• Do NOT allow anything to rest on the power adaptor or cord and do

NOT place the product where anyone can walk on the power

adaptor or cord.

• Do NOT use the device if the power adaptor or cord is damaged as

it might cause electrocution.

• If the power adaptor or cord is damaged, remove it from the device

and the power source.

• Do NOT attempt to repair the power adaptor or cord. Contact your

local vendor to order a new one.

• Do not use the device outside, and make sure all the connections

are indoors. There is a remote risk of electric shock from lightning.

• Do NOT obstruct the device ventilation slots, as insufficient airflow

may harm your device.

• Use only No. 26 AWG (American Wire Gauge) or larger

telecommunication line cord.

• Antenna Warning! This device meets ETSI and FCC certification

requirements when using the included antenna(s). Only use the

included antenna(s).

VSG1432-B101 Series

Hardware Setup

Place the VSG1432-B101 flat on a desk or table or on the stand for a

vertical installation.

Remove the VSG1432-B101’s clear plastic covers before

using it.

To connect the stand, line up the arrow on the stand with the arrow on

the bottom of the device as shown.

To connect your VSG1432-B101:

1. Attach the antenna and point it up.

VSG1432-B101 Series

2. Do one of the following for your Internet connection:

a. DSL WAN: Use a telephone cable to connect your VSG1432-

B101’s DSL port to a telephone jack (or the DSL or modem jack on

a splitter if you have one).

b. ETHERNET WAN: If you already have a broadband router or

modem, use an Ethernet cable to connect the ETHERNET WAN

port to it for Internet access.

3. LAN: Use an Ethernet cable to connect a computer to a LAN port for

initial configuration and/or Internet access.

4. USB: Connect a USB (version 2.0 or lower) memory stick or a USB

hard drive for file sharing. Use a USB extension cable if the stick is

too big to fit.

5. POWER: Use the provided power adaptor to connect the POWER

socket to an appropriate power source. Make sure the power at the

outlet is on. After connecting the power adaptor, look at the lights on

the front panel.

• The POWER light blinks while your VSG1432-B101 starts up and

then stays on once it is ready.

• Each LAN light stays on if the corresponding LAN port is properly

connected and blinks when there is traffic.

• The ETHERNET WAN light stays on if the ETHERNET WAN port is

properly connected and blinks when there is traffic.

• The USB light turns on when your VSG1432-B101 detects a

connected USB device.

• The DSL WAN light turns on when your VSG1432-B101 has a DSL

connection.

• The WLAN / WPS light flashes green and orange while WPS is in

process. It stays on green when the wireless LAN is ready and

blinks when there is traffic.

• The INTERNET light turns on when the gateway is able to access

the Internet and will blink when your VSG1432-B101 is sending or

receiving data.

If the lights do not come on, check your connections and inspect your

cables for damage. If the lights are still off, contact technical support.

VSG1432-B101 Series

Set Up a Wireless Network

You can set up a wireless network using the following methods:

Using Wireless Protected Setup (WPS)

Press the WPS button on the VSG1432-B101’s front panel for more than

5 seconds to turn the WPS function on.

Follow these steps to add a WPS-enabled device to the wireless network

using the WPS/WLAN button.

Place the devices you want to connect near

one another.

Press the WPS button on the VSG1432-

B101.

The WPS light blinks green and orange.

Press the WPS button on a compatible

device within 2 minutes of pressing the

button on the VSG1432-B101.

The WPS light on the VSG1432-B101

shines steadily when connected.

Set Up a Wireless Network Manually

The wireless LAN on your VSG1432-B101 is enabled by default. To add

a wireless client to the network, use the settings found on the bottom

panel of your VSG1432-B101, which will look similar to the following

example:

Configure wireless devices that you want to connect to the wireless

network to use the same wireless settings as the VSG1432-B101.

The default wireless settings vary for each VSG1432-B101. Refer to the

bottom panel of your device and use the provided information.

Log into the Web Configurator

Your device may already be set up for Internet access. However, you

may want or need to log on to the VSG1432-B101 Web Configurator to

perform tasks:

• Configure your Internet access settings manually

• Customize the Quality of Service (QoS) and routing features

• Create firewall and web filter rules

• Edit remote management, as well as other features

SSID: ZyXEL00561

Security Mode: WPA-PSK

Pre-Shared Key: FB373BD356

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications WLAN-Router Handbücher

ZyXEL Communications

ZyXEL Communications NBG334W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-4615 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ARMOR G1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-417N - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5317-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX-200M1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4604 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6503 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG 5715 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6616 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6816 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-334SH Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG6617 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-2000 Plus Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WT Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE5388-M804 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-335U Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2608HWL-D1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MWR102 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG4115 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-334WHD Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-336M Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung