Declaration of Conformity
CE-Conformity
This product has been developed and manufactured in accordance with
the current European standards and guidelines.
Note: A Declaration of Conformity can be requested separately.
General
The Inclination Sensor 622031 is an instrument used to control the inclina-
tion angle of a reference axis.
The product should be examined for any possible damage that may have
occurred during transportation. Should any damage have occurred, please
contact the transportation company or 2E mechatronic without delay.
Read the instructions carefully. Familiarize yourself with the device before
assembling, installing and operating.
The following assembly and operation instructions have been carefully
drafted, however, it is not possible to cover every conceivable eventuality.
Therefore, if you have any queries regarding the product or its application
we can be contacted at our internet address (www.2E-mechatronic.de) or
one of our contact personnel for further information.
The Sensor should be operated and installed in accordance with the ins-
tructions given in order to guarantee that the device and the connected
systems operate safely.
The safety of operating personnel can only be guaranteed when the device
is used for the purpose which it was intended for.
Furthermore the national regulations are to be followed. (e.g. VDE0100)
shielded cables to be used for connecting the device.
Safety Instructions
Responsibility for safe planning, assembly, operating and maintenance lies
with the equipment user.
The installation and operation of all devices should only be carried out
by qualied personnel. Changes or modications which are not expressly
Page 3 | Instruction Manual 622031 | 2E mechatronic
