3D Systems PROJET 3500 Referenzhandbuch

2014

年

9

月

8

日

1

1

3D SYSTEMS- Procedures

PROJET® 3500 PRINTERS

“Procedure VisiJet® M3 Black Material Hygiene”

Revision date August 29, 2014

Objectives

After completing this procedure you will be able to:

Perform VisiJet® M3 Black/printhead hygiene maintenance procedure.

VisiJet® M3 Black Printhead Hygiene

•It strongly recommended to run this

printhead hygiene procedure after

EVERY build to ensure optimal, long life

performance of the printhead when

running with VisiJet® M3 Black.

VisiJet® M3 Black Printhead Hygiene

Criteria for Printhead Hygiene:

Perform this procedure after

EVERY BUILD.

PROCED RE:

STEP 1:

From the ProJet® Operator Panel

Select the Tools icon.

VisiJet® M3 Black Printhead Hygiene

STEP 2:

In the next screen select Print

Diagnostics.

STEP 3:

In the next screen select Test Print.

VisiJet® M3 Black Printhead Hygiene

The printer will start a print that will be approximately 10 minutes in duration.

The build will lay down 1 layer of part and support material.

STEP 4:

Inspect the test build for

consistency

•A good test build should be

solid across the entire line for

both part and support

materials.

•Pay particular attention to the

part material line to

determine if additional

hygiene should be performed.

Example of a Good Test Print

•Test print should be free of spaces or

gaps.

VisiJet® M3 Black Printhead Hygiene

STEP 5:

If the test print does not look good as

described (See photo)

•Repeat Steps 1-3 to perform another

Test Print.

STEP 6:

If after three (3) Test Print attempts, the

build does not pass

•Contact your 3D Systems Service

Personnel who will provide you with

advanced troubleshooting

procedures.

Example of a Bad Test Print

•Notice the blank areas. This represents jets

that are partially or fully clogged or missing.

The Test Print will quickly clear out any potentially clogged jets with minimal material usage.

Please use this procedure when printing with VisiJet® M3 Black AFTER each build.

Andere 3D Systems 3D-Drucker Handbücher

3D Systems

3D Systems sPro Bedienungsanleitung

3D Systems

3D Systems DuraForm TPU Elastomer Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

3D Systems

3D Systems FabPro 1000 Handbuch

3D Systems

3D Systems CubePro Stücklistenhandbuch

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems CubePro Montageanleitung

3D Systems

3D Systems PostCure 1050 Bedienungsanleitung

3D Systems

3D Systems 3D Sprint Bedienungsanleitung

3D Systems

3D Systems ZPrinter 350 Bedienungsanleitung

3D Systems

3D Systems ProX SLS 6100 Bedienungsanleitung

3D Systems

3D Systems iPro 8000 SLA Center Bedienungsanleitung

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems wematter Atmosphere Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

3D Systems

3D Systems ProX DMP320 Bedienungsanleitung

3D Systems

3D Systems ProJet 4500 Bedienungsanleitung

3D Systems

3D Systems CubePro Gebrauchsanweisung

3D Systems

3D Systems ProJet 5500X Bedienungsanleitung

3D Systems

3D Systems ZPRINTER 150 Bedienungsanleitung

3D Systems

3D Systems Cube 3rd Generation Bedienungsanleitung

3D Systems

3D Systems ProX Bedienungsanleitung

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems ProX DMP 100 Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch