3D Systems ProJet SLA 6000 Bedienungsanleitung

3D SYSTEMS, INC. P/N 40-D119 REV_A

ProJet® SLA 6000/7000

Long Term Shutdown Procedure

Original Instuctions



3D SYSTEMS, INC. P/N 40-D119 REV_A

If you will be shutting down your ProJet 6000/7000 system for an extended period, we recommend to do the following:

HOME THE ELEVATOR

1. At the bottom of the touch screen, tap the Advanced button.

2. Tap the Elevator/Leveler button to open the Elevator/Leveler screen

3. Tap the Home button to home the elevator.

4. Wait for the elevator to complete the homing process.

DISCONNECT THE MATERIAL LINE TO THE PRINT TRAY

We recommend that you disconnect the material line from the print tray to prevent back ow of material into the cart. This

could lead to the reservoir of the cart becoming over lled and causing a material leak from the top of the reservoir lid.

1. Open the Build Chamber and Cart doors.

2. While wearing Nitrile gloves, remove the cart hose from the print tray by depressing the quick-release button and

disengaging the connector from the print tray. Resin may drip out of this connector, be sure to have a towel handy.

3. Connect the hose to the free connector on the material cart. Eliminate slack by wrapping it around the grooved

component on the umbilical connector.

BACKUP CRITICAL FILES

Log Into Windows

1. Please connect a keyboard and mouse to the USB ports on the machine.

2. Press Ctrl + Alt+ Del on the keyboard and tap on Log O on the touchscreen.

3. Conrm that you wish to Log O. Log into Widows Desktop with the follow credentials:

a. User Name: administrator

b. Password: 3dsys

Backing Up Files

1. Create a new folder on the ProJet 6000 Desktop named PJ6KBackup.

2. Using Windows Explorer, navigate to 

a. Copy the le  and paste it into the PJ6KBackup folder.

3. Using Windows Explorer, navigate to C:/Program Files/3D Systems/ProJet 6000/current_version/

a. Copy the le  and paste it into the PJ6KBackup folder.

b. Copy the le  and paste it into the PJ6KBackup folder.

1LONG TERM SHUTDOWN PROCEDURE



3D SYSTEMS, INC. P/N 40-D119 REV_A

4. Navigate to C:/Program Files/3D Systems/ProJet 6000/current_version/Data/

a. Copy the  le and paste it into the PJ6KBackup folder.

b. Copy the  le and paste it into the PJ6KBackup folder

c. Copy the PowerCal folder and paste it into the PJ6KBackup folder.

5. Navigate to C:/Program Files/3D Systems/ProJet 6000/license/

a. If there is no le present, disregard this step.

b. If there is a  le present, copy and paste it into the PJ6KBackup folder.

6. Copy and paste the entire PJ6KBackup folder onto a ash drive or alternate storage device. Keep this folder in a secure

location in the event the les inside are needed.

POWERING OFF THE SYSTEM

Below are two options for powering o the system. Choose an option that best suits your situation.

1. While still in Windows

1. Click on the Start button.

2. Click on  and wait for Windows to complete the shutdown process.

3. Go to the rear of the machine and toggle the power switch to the right to turn o the power to the system.

4. If you wish you can disconnect the electrical power cable from the machine or the wall.

2. While In The User Interface

1. At the bottom of the touch screen, tap the button.

2. Tap on the Printer button

3. Tap on the button.

4. Conrm that you want to Shutdown the Printer.

5. Wait for the system to complete shutdown.

6. Go to the rear of the machine and toggle the power switch to the right to turn o the power to the system.

7. If you wish you can disconnect the electrical power cable from the machine or the wall.



3D SYSTEMS, INC. P/N 40-D119 REV_A

3D Systems, Inc.

333 Three D Systems Circle | Rock Hill, SC 29730 | USA

www .3dsystems .com

PN: 40-D118 Rev. A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere 3D Systems 3D-Drucker Handbücher

3D Systems

3D Systems ZPRINTER 150 Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

3D Systems

3D Systems DuraForm TPU Elastomer Bedienungsanleitung

3D Systems

3D Systems CubePro 3D Printer Bedienungsanleitung

3D Systems

3D Systems iPro 8000 SLA Center Bedienungsanleitung

3D Systems

3D Systems Duraform ProX PA Bedienungsanleitung

3D Systems

3D Systems CubePro Stücklistenhandbuch

3D Systems

3D Systems CubeX Montageanleitung

3D Systems

3D Systems ProJet 6000 Bedienungsanleitung

3D Systems

3D Systems ProJet 4500 Bedienungsanleitung

3D Systems

3D Systems sPro Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

3D Systems

3D Systems Figure 4 Standalone Handbuch

3D Systems

3D Systems ProJet 4500 Bedienungsanleitung

3D Systems

3D Systems ProX 950 Bedienungsanleitung

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems CubePro Handbuch

3D Systems

3D Systems wematter Gravity Bedienungsanleitung

3D Systems

3D Systems ProX DMP 300 Bedienungsanleitung

3D Systems

3D Systems Cubify CUBEX Duo Bedienungs- und Sicherheitshinweise

3D Systems

3D Systems Cubify CUBEX Duo Bedienungsanleitung

3D Systems

3D Systems BFB-3000 Bedienungsanleitung

3D Systems

3D Systems ProJet MJP 3600 Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch