3D Systems CUBE Bedienerhandbuch

Help Documentation

Print monitoring app for iOS and Android

Cube Print

3D Systems, Inc. 1

TABLE OF CONTENTS

1INTRODUCTION 2

GETTING HELP 2

SUPPORT 2

2SETTING UP YOUR CUBE PRINT SOFTWARE 3

SYSTEM REQUIREMENTS 3

UPDATING THE APP 3

3APP OVERVIEW 4

CONNECTING PRINTER 4

MENU 5

3D Systems, Inc. 2

1 INTRODUCTION

Thank you for purchasing a 3D Printer from 3D Systems.

The Cube Print mobile app is designed to help you in your 3D-printing process, and enables you to monitor and control your Cube or

EKOCYCLE printer while its printing. Use the Windows or Mac version, available at 3dsystems.com, to setup and send prints to the

printer.

This document will guide you how to use the Cube Print mobile app.

For more information on using your printer, please see the printer’s User Guide avaliable at 3dsystems.com

contains proprietary information that is the property of 3D Systems, Inc. The 3D Systems logo, 3D Systems, and Cube are registered

trademarks of 3D Systems, Inc.

trademarks of The Coca-Cola Company.

The EKOCYCLE lament contains 25% recycled materials, using an average of 3 assorted recycled 20oz PET bottles.

GETTING HELP

Select Help in the menu to open this help document. Or check the printers User Guide available at 3dsystems.com.

SUPPORT

Please go to www.3dsystems.com/store/support to get support.

3D Systems, Inc. 3

2 SETTING UP YOUR CUBE PRINT SOFTWARE

For information on how to unpack and start using your printer, see the User Guide available at 3dsystems.com.

SYSTEM REQUIREMENTS

Android:

Phones/tablets running Android 4.0 (Ice Cream Sandwich) and above.

iOS:

iPhone running iOS 8 or above.

Works on iPad in 2X Mode running iOS 8 or above.

UPDATING THE APP

Andoid:

Update the app in the Play Store, tap on My Apps and nd Cube Print, if there are updates available the app will be labled Update.

iOS:

Update the app in the Appstore, updates can be found in the Updates tab.

3D Systems, Inc. 4

3 APP OVERVIEW

AMenu CLeft Cartridge EPrint Status

BConnected Printer and

status DRight Cartridge FPrint Control Buttons. Pause or

Cancel the current print.

CONNECTING PRINTER

When the app is opened, printers will be searched for on the network. If the printer is not found, click Find a Cube Manually, and enter

the IP-Address of the printer. The printer IP-Address can be found under Settings > Wi on the printer.

3D Systems, Inc. 5

Cube Info - Connect to or see information about the connected

printer.

Cartridge Status - See current status of cartridges.

Recycle Statistics (EKOCYCLE) - See amount of recycled bottles.

Help - Download and open help documentation.

About - Information about the app.

Cube Info

Manage and see information about the connected printer.

Firmware - Shows rmware version of the connected printer.

Printer name - Name of the connected printer.

Printer MAC address - Unique MAC address of the printer.

Serial Number - Serial number of the connected printer.

Part fan - Status of part fan.

Printjet fan - Status of printjet fan.

Left print jet temp - Temperature of left print jet.

Right print jet temp - Temperature of right print jet.

Wi - Wi-Fi network connection.

Printer IP address - Shows the printers IP-address.

Find Cubes on the network - Find Cube printers connected to

the network.

Find a Cube manually - Enter the IP-address of the Cube to

connect manually.

3D Systems, Inc. 6

Recycle Statistics (EKOCYCLE)

See the total number of bottles that has been recycled with the connected

EKOCYCLE printer.

Cartridge Status

See the status of the connected printer’s cartridges.

Help

Open up the help documentation, it is available as a PDF le. To get more help, you can contact 3D Systems Support.

About

See information about the app, such as version number and copyright information.

3D Systems, Inc.

333 Three D Systems Circle | Rock Hill, SC | 29730

www.3dsystems.com

Andere Handbücher für CUBE

Inhaltsverzeichnis

Andere 3D Systems 3D-Drucker Handbücher

3D Systems

3D Systems ProJet 4500 Bedienungsanleitung

3D Systems

3D Systems ProJet 1200 Bedienungsanleitung

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems Allevi 3 Bedienungsanleitung

3D Systems

3D Systems ProX SLS 6100 Bedienungsanleitung

3D Systems

3D Systems ZPrinter 350 Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

3D Systems

3D Systems SLA 750 Series Bedienungsanleitung

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems ProJet 7000 Bedienungsanleitung

3D Systems

3D Systems CUBE Bedienungsanleitung

3D Systems

3D Systems Viper Pro SLA iPro 8000 Bedienungsanleitung

3D Systems

3D Systems ProJet MJP 5600 Bedienungsanleitung

3D Systems

3D Systems ZPRINTER 150 Bedienungsanleitung

3D Systems

3D Systems ProX 500 Bedienungsanleitung

3D Systems

3D Systems DuraForm TPU Elastomer Bedienungsanleitung

3D Systems

3D Systems CubePro Stücklistenhandbuch

3D Systems

3D Systems Viper Pro SLA Bedienungsanleitung

3D Systems

3D Systems CubePro Bedienungsanleitung

3D Systems

3D Systems sPro Bedienungsanleitung

3D Systems

3D Systems ProJet 5500X Bedienungsanleitung

3D Systems

3D Systems ProX DMP 100 Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch