ABB I-bus 6115-24-500 Bedienungsanleitung

73 - 1 - 5824

22013

ABB i-bus®EIB

UP switching sensor

6115-/16-/17- 24 - 500

for UP bus coupling unit 6120 U-500

Operating instructions

only for authorized, skilled electricians with

EIB training

Important instructions

Attention

It is absolutely essential that the EIB bus is installed by

anauthorizedelectrician.Layingandconnectionofbus

line and applications devices must be effected in

conformity with valid regulations according to DIN -

VDE and the EIB manual of the ZVEI/ZVEH.

Notes

The covering frame supplied with the UP switching sensor

(item no. 1721) is equipped with an inspection window (fig.

1, pos. 2). You may use perforated sheets for labelling

(item no. 1799).

The manufacturer database of ABB is continuously

supplemented and completed. It stores the latest types of

applications and their related descriptions. If this database

is not available to you, please send us for a copy.

Technical data / Fig. 1

Nominal voltage: 5 V

Current consumption: < 10 mA

Environmental temperature range: -5 to +45 °C

Fig. 1

6120 U

Phy. Adresse

Installation

Plug the application (Fig. 1, pos. 1) onto the UP bus coupling

unit (pos. 4) in such a way that the 10-pin connector (pos.

6) on the rear side is not canted or tilted. The plastic webs

(pos. 7) on the rear side of the application must be inserted

into the relieves (pos. 5) provided in the retaining ring of the

bus coupling unit.

Note

Operator function and addressing (see also operating

instructions for the UP bus coupling unit) may be

programmed simultaneously or at different times.

Dismounting

The application has got two relieves on its left and right

hand side (pos. 8) where it may be dismounted from the

bus coupling unit. Use these relieves, for otherwise only a

single key but not the whole application will be loosened.

Adapt bus coupling process

Assign physical address

• Connect a PC equipped with the EIBA software (ETS)

to the EIB bus line via an EIB-RS 232 interface.

• Press the programming key at the bus coupling unit:

the red programming LED will become illuminated.

• After the physical address has been programmed,

the red LED will go out.

• Write the number of the physical address on your

device using a smudge-proof pencil (cf. Fig. 1, pos. 3).

Assign group address(es)

• Group addresses are assigned via a PC in connection

with the ETS software.

Adapt bus coupling process

Select application

By default, the UP bus coupling unit is programmed to

operate one application for the switching (1-, 2-, 4-fold) of

consumers.

To a 4-fold switching sensor, for instance, the following

functions apply:

Key I 0

Function ON OFF

LED red green

Physical address F F F F

Group address 0/1 - 0/4

These functions apply analogously to the single or 2-fold

switching sensor.

Openthedevice windowandchoosethe desiredapplication

version. At present, there are two versions available.

Adapt bus coupling process

Differentiate application

Version 1

A separate group address may be assigned to the LED of

the rocker switch. This address is independent from the

group address which has been assigned to the switching

function of the rocker.

Example for application:

The LED shall indicate the current switching status of an

actuator which is selected via several group addresses.

Version 2

The group address of the rocker's switching function and

that of the integrated LED are indentical.

The LED will not change its colour, if a data telegram has

not been transmitted properly.

Adapt bus coupling process

Instructions

You may differentiate version 1 and 2 by means of the ETS

via the “parameters” option:

• LED colour

The colour of the LED in ON/OFF state may be set to

“red” or “green”.

• LED function

Assign a function to individual LED's or set them

without any function; this means that an LED which

has not been assigned any function will not change

its colour.

If a touch contact / dimmer function is requested, the UP

bus coupling unit has to be loaded with different ABB

application data (applications).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ABB Zubehör Handbücher

ABB

ABB TOTALFLOW LevelMaster Series Benutzerhandbuch

ABB

ABB LevelMaster 7100 Bedienungsanleitung

ABB

ABB Ability Bedienungsanleitung

ABB

ABB 3120EUCKS-214 Bedienungsanleitung

ABB

ABB 4690 Series Bedienungsanleitung

ABB

ABB Ability Bedienungsanleitung

ABB

ABB AP200 Series Bedienungsanleitung

ABB

ABB CSU-2LV Produkthandbuch

ABB

ABB AquaProbe FEA100 Bedienungsanleitung

ABB

ABB Wireless Proximity Switches Merkblatt

ABB

ABB Cylon FBXi Bedienungsanleitung

ABB

ABB TB404 Bedienungsanleitung

ABB

ABB Endura AZ40 Bedienungsanleitung

ABB

ABB SCC-C Bedienungsanleitung

ABB

ABB Relion SMU615 Bedienungsanleitung

ABB

ABB Ability Smart Sensor Bedienungsanleitung

ABB

ABB CS500 Bedienungsanleitung

ABB

ABB NIESSEN 8131 Bedienungsanleitung

ABB

ABB AquaMaster4 Bedienungsanleitung

ABB

ABB Ability Bedienungsanleitung

ABB

ABB KEVA 36 G2 Series Stücklistenhandbuch

ABB

ABB CoreSense Bedienungsanleitung

ABB

ABB HS/S4.2.1 Bedienungsanleitung

ABB

ABB SensyTemp TSP Schulungshandbuch

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

ABB i-bus 6115-24-500 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken