ABB ScreenMaster RVG200 Gebrauchs- und Pflegehandbuch

—

ABB MEASUREMENT & ANALYTICS | INSTRUCTION | IN/RANDC/006-EN REV. A

ScreenMaster RVG200

Paperless recorder

Battery replacement

Measurement made easy

1 Introduction

This publication details replacement of the battery

(B12454) fitted to the baseboard of the RVG200

Paperless recorder. The procedure must be carried

out by a trained technician.

Tools required

• Medium flat-bladed screwdriver

2 For more information

Further information is available from:

www.abb.com/recorders

or by scanning these codes:

Sales Service

3 Safety

IMPORTANT NOTE

Dispose of the old components as detailed in the

Operating Instructions (OI/RVG200-EN).

ScreenMaster RVG200

paperless recorder

2 IN/RandC/006-EN Rev. A | ScreenMaster RVG200 | Paperless recorder | Battery replacement

4 Replacing the battery

1. Isolate the recorder from the power supply.

Referring to Fig. 4.1:

2. Remove the tamper evident seal Aif fitted.

3. Using a medium flat-bladed screwdriver, unscrew jacking

screw B.

4. Remove chassis Cfrom case D.

Referring to Fig. 4.2:

5. Locate the mounted battery Eon the underside of the

case.

Referring to Fig. 4.3:

6. Remove the battery from the battery-mount Fand fit a

new battery.

Referring to Fig. 4.1:

7. Insert chassis Cinto case D.

8. Using a medium flat-bladed screwdriver to secure jacking

screw Bto case D.

9. Fit new tamper evident seal A(if required).

10. Restore power to the recorder and proceed to Section 5,

page 3.

CAUTION – Property damage

The recorder is vulnerable to electrostatic damage.

Wear an anti-static strap or place the instrument on

an anti-static workbench.

Fig. 4.1 Removing the recorder from its case

Fig. 4.2 Locating the battery

Important note

Dispose of the old battery as detailed in the

Operating instructions (OIRVG200-EN).

Fig. 4.3 Replacing the battery

ScreenMaster RVG200 | Paperless recorder | Battery replacement | IN/RandC/006-EN Rev. A 3

5 Setting the time and date

To access the Configuration menus:

1. Touch on the first Operator menus page.

2. Enter an operator password (if configured).

3. Select the Edit Configuration mode by touching the

button.

The System Configuration page is displayed:

4. Press Common.

The Common Configuration menu is displayed:

5. Select Time and press (next to the Date and time

box).

A warning dialog is displayed:

6. Press .

The Date and time menu is displayed:

7. Set the required time and date using the instrument

touchscreen. Once finished, press and exit and

save the configuration as normal.

Important note

Once the battery has been removed, the battery failed

icon is displayed on the front panel of the unit. To

restore normal operation, the correct time and date

must set.

Important note

Changing the time will potentially cause loss of

data. Ensure that all data archiving is up to date

before proceeding.

IN/RandC/006-EN Rev. A 12.2018

—

We reserve the right to make technical changes or modify the contents of this document

without prior notice. With regard to purchase orders, the agreed particulars shall prevail.

ABB does not accept any responsibility whatsoever for potential errors or possible lack of

information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained

therein. Any reproduction, disclosure to third parties or utilization of its contents – in

whole or in parts – is forbidden without prior written consent of ABB.

—

ABB Limited

Measurement & Analytics

Howard Road, St. Neots

Cambridgeshire, PE19 8EU

Tel: +44 (0)0870 600 6122

Fax: +44 (0)1480 213 339

Email: instrumen[email protected]om

ABB Inc.

Measurement & Analytics

125 E. County Line Road

Warminster

PA 18974

USA

Tel: +1 215 674 6000

Fax: +1 215 674 7183

abb.com/measurement

Andere Handbücher für ScreenMaster RVG200

Andere ABB Messgerät Handbücher

ABB

ABB Relion RES670 Bedienungsanleitung

ABB

ABB EasyLine EL3000 Bedienungsanleitung

ABB

ABB LevelMaster 7100 Bedienungsanleitung

ABB

ABB ProcessMaster wafer FEM610 Series Bedienungsanleitung

ABB

ABB EXCOUNT-II Bedienungsanleitung

ABB

ABB SensyMaster FMT430 Bedienungsanleitung

ABB

ABB TMD-T4 Bedienungsanleitung

ABB

ABB SwirlMaster FSS430 Schulungshandbuch

ABB

ABB WVM Series Bedienungsanleitung

ABB

ABB PROFIBUS FEX100-DP Bedienungsanleitung

ABB

ABB M1M 30 Series Bedienungsanleitung

ABB

ABB Totalflow uFLO 6213 Benutzerhandbuch

ABB

ABB LWT300 series Bedienungsanleitung

ABB

ABB Advance Optima Uras 14 Bedienungsanleitung

ABB

ABB 10D1476 Bedienungsanleitung

ABB

ABB 10D1475 Bedienungsanleitung

ABB

ABB ICOS GLA151 Series Bedienungsanleitung

ABB

ABB CoriolisMaster FCB100 Bedienungsanleitung

ABB

ABB MagMaster Merkblatt

ABB

ABB B23 Bedienungsanleitung

ABB

ABB TRIO-WIRL ST4000 Bedienungsanleitung

ABB

ABB EasyLine Series Benutzerhandbuch

ABB

ABB GLA131 Series Bedienungsanleitung

ABB

ABB 8241 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung