Acer Altos G300 Bedienungsanleitung

Acer Altos G300 Series

User’s guide

aa300.book Page i Tuesday, December 17, 2002 5:27 PM

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondense concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Acer Altos G300 Series

User’s guide

December 2002

Acer and the Acer Logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

aa300.book Page ii Tuesday, December 17, 2002 5:27 PM

iii

Notices

FCC notice

This device has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This device generates, uses,

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this device does cause harmful interference to

radio or television reception, which can be determined by turning the

device off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/television technician

for help

Notice: Shield cables

All connections to other computing devices must be made using

shielded cables to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.)

certified to comply with the Class B limits may be attached to this

equipment. Operation with noncertified peripherals is likely to result

in interference to radio and TV reception.

Caution! Changes or modifications not expressly approved by the

manufacturer could void the user’s authority, which is granted by

the Federal Communications Commission, to operate this

computer.

Use conditions

aa300.book Page iii Tuesday, December 17, 2002 5:27 PM

This part complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numérique de la classe B respected toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

Important safety instructions

Read these instructions carefully. Save these instructions for future

reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

5 Slots and openings in the cabinet and the back or bottom are

provided for ventilation; to ensure reliable operation of the

product and to protect it from overheating, these openings must

not be blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or

heat register, or in a built-in installation unless proper ventilation

is provided.

6 This product should be operated from the type of power indicated

on the marking label. If you are not sure of the type of power

available, consult your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate

this product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the

total ampere rating of the equipment plugged into the extension

cord does not exceed the extension cord ampere rating. Also,

aa300.book Page iv Tuesday, December 17, 2002 5:27 PM

make sure that the total rating of all products plugged into the

wall outlet does not exceed the fuse rating.

9 Never push objects of any kind into this product through cabinet

slots as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Never spill liquid

of any kind on the product.

10 Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or

other risks. Refer all servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

12 When the power cord or plug is damaged or frayed

a If liquid has been spilled into the product

b If the product has been exposed to rain or water

c If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal condition.

d If the product has been dropped or the cabinet has been damaged

e If the product exhibits a distinct change in performance, indicating a

need for service.

f Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or

explosion. Refer battery replacement to a qualified serviceman.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from

children and dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in

your accessories box) for this unit. It should be a detachable type:

UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE

approved or its equivalent. Maximum length is 15 feet (4.6

meters).

Laser compliance statement

The CD-ROM drive in this computer is a laser product. The CD-ROM

drive’s classification label (shown below) is located on the drive.

aa300.book Page v Tuesday, December 17, 2002 5:27 PM

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID

EXPOSURE TO BEAM.

APPAREIL A LASER DE CLASSE 1 PRODUIT

LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS

D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.

LASER KLASSE 1

VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG

GEÖFFNET, NICHT DEM STRAHLL AUSSETZEN

PRODUCTO LÁSER DE LA CLASE I

ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE

EXPONERSE A LOS RAYOS.

ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN

VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.

VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ

TUIJOTA SÅTEESEENSTIRRA EJ IN I STRÅLEN

VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ

IN I STRÅLEN

ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I

STRÅLEN

Lithium battery statement

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer’s instructions.

ADVARSEL!

Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning

må kun ske med batteri af samme fabrikat og type. Léver det brugte

batteri tilbage til leverandøren.

ADVARSEL

Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme

batteritype eller en tilsvarende type anbefalt av apparatfabrikanten.

Brukte batterier kasseres i henhold til fabrikantens instruksjoner.

VARNING

Explosionsfara vid felaktigt batteribyte. Anvãnd samma batterityp eller

aa300.book Page vi Tuesday, December 17, 2002 5:27 PM

vii

en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera

anvãnt batteri enligt fabrikantens instruktion.

VAROITUS

Päristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo

ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty

paristo valmistajan ohjeiden mukaisesti.

VORSICHT!

Explosionsgefahr bei unsachgemäßen Austausch der Batterie Ersatz

nur durch denselben oder einem vom Hersteller empfohlenem

ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des

Herstellers.

aa300.book Page vii Tuesday, December 17, 2002 5:27 PM

viii

aa300.book Page viii Tuesday, December 17, 2002 5:27 PM

Contents

1 Getting started 1

Overview 3

Processor 3

Memory 4

System chipsets 4

ServerWorks GC-SL chipset 4

LAN subsystem 4

Expansion slots 5

PCI bus 5

Hardware management support 5

Features summary 6

Preinstallation requirements 7

Selecting a site 7

Checking the package contents 7

Basic connections 8

Connecting the keyboard 8

Connecting the mouse 9

Connecting the VGA monitor 10

Connecting to the network 10

Connecting the power cable 11

System startup 12

Power-on problems 13

Connecting options 14

Printer 14

USB devices 14

Tower-to-rack option 16

2 System tour 17

External and internal structure 19

Front panel 19

Rear panel 21

Internal components 22

System board layout 23

Control Panel (JP3) 26

Jumper Setting (J13) 26

Diagnostics LED (Port80LED) 27

3 Upgrading your system 29

Installation precautions 31

ESD precautions 31

Preinstallation instructions 31

Post-installation instructions 32

aa300.book Page ix Tuesday, December 17, 2002 5:27 PM

Opening your system 33

Removing the front panel 33

Removing the side panels 34

Installing and removing storage devices 36

Replacing a 3.5-inch or a 5.25-inch storage device 36

Installing a hard disk 38

Installing a DLT 39

Installing and removing the CPU 40

Installing a CPU 40

Removing a CPU 41

Installing and removing memory modules 43

Reconfiguring the system 44

Installing expansion cards 45

4 Setup utility 47

Introduction 49

Setup Menu 50

Setup submenu: Main 51

Setup submenu: Advanced 52

SuperIO Configuration 53

IDE Configuration 54

Auto Detect Hard Disks 55

Primary IDE Master (if attached Hard Disk) 56

Secondary IDE Master (if attached ATAPI CDROM)58

Secondary IDE Slave (if none attached) 58

Floppy Configuration 59

PCIPnP Configuration 60

Boot Settings Configuration 62

Event Log Configuration 63

View Event Log 64

Mark All Events As Read 64

OnBoard Devices Configuration 65

System Health Monitoring Hardware 65

Hardware Monitor Setup Page 65

System Hardware Monitor 66

Remote Access Configuration 68

Setup submenu: Power 69

Setup submenu: Boot 70

Boot Device Priority 71

Hard Disk Drives 72

Removable Devices 73

ATAPI CDROM Drives 74

Setup submenu: Security 75

aa300.book Page x Tuesday, December 17, 2002 5:27 PM

Andere Handbücher für Altos G300

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer Altos G310 MK2 Series Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer 12000 Bedienungsanleitung

Acer

Acer AR380 F1 Series Bedienungsanleitung

Acer

Acer AW2000h-AW175h F1 Bedienungsanleitung

Acer

Acer AR360 F2 Bedienungsanleitung

Acer

Acer Altos G700 series Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer Altos G540 M2 Series Bedienungsanleitung

Acer

Acer Altos S700 Series Bedienungsanleitung

Acer

Acer Altos R520 M2 Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer AR320 F1 Series Bedienungsanleitung

Acer

Acer Altos R720 Series Bedienungsanleitung

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer Ferrari 1100 Series Bedienungsanleitung

Acer

Acer Altos 19000PRO4 Stücklistenhandbuch

Acer

Acer WT 300 Bedienungsanleitung

Acer

Acer HDS AMS200 Bedienungsanleitung

Acer

Acer Altos R480 F4 Bedienungsanleitung

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer 700id Bedienungsanleitung

Acer

Acer AT310 F2 Bedienungsanleitung

Acer

Acer AR585 F1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung