ACME VENOM LED-460 Bedienungsanleitung

VENOM

LED-460

User Guide

Please read the instruction carefully before use

Contents

1. Safety Instructions.................................................................................................. 2

2. Technical Specifications.......................................................................................... 3

3. Installation ............................................................................................................. 3

4. How to Set the Fixture ........................................................................................... 4

4.1 Control Panel.................................................................................................... 4

4.2Main Function ...................................................................................................5

5. How to Control the Unit ......................................................................................... 9

5.1 Master/Slave Built In Preprogrammed Function...............................................9

5.2. Easy Controller (by CA-8) ............................................................................... 10

5.3 DMX Controller............................................................................................... 10

6. DMX 512 Configuration ........................................................................................ 11

7. DMX 512 Connection ........................................................................................... 12

8. Troubleshooting ................................................................................................... 13

9. Cleaning And Maintenance .................................................................................. 14

1. Safety Instructions

WARNING

Please keep this User Manual for future consultation. If you sell the fixture to another user, be

sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using the fixture.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Disconnect main power before servicing and maintenance.

Maximum ambient temperature is Ta: 40℃. Don’t operate it where the temperature is higher

than this.

In the event of serious operating problem, stop using the fixture immediately. Never try to

repair the fixture by yourself. Repairs carried out by unskilled people can lead to damage or

malfunction. Please contact the nearest authorized technical assistance center. Always use the

same type spare parts.

Do not connect the device to any dimmer pack.

Do not touch any wire during operation and there might be a hazard of electric shock.

To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or

moisture.

The housing must be replaced if they are visibly damaged.

Do not look directly at the LED light beam while the fixture is on.

There are no user serviceable parts inside the fixture. Do not open the housing or attempt any

repairs by yourself. In the unlikely event your fixture may require service, please contact your

nearest dealer.

Due to the magnifying type lens, please keep the lens out of contact with direct sunlight. Direct

sunlight can cause heat to build up inside of the unit, which will seriously damage unit.

Please read the instructions carefully which includes important

information about the installation, operation and maintenance.

If using a 230Vac 50Hz power supply, do not connect in series more than 14 units, use another

mains supply for the next 14 units.

If using a 120Vac 60Hz power supply, do not connect in series more than 9 units, use another

mains supply for next 9 units.

2. Technical Specifications

Featuring 6 high-power 3W Tri-color LEDs.

Each color of R, G, B can be controlled individually.

DMX 3/18 channels switchable.

Smooth 0~100% dimming and variable strobe speeds.

Three operation modes: DMX, Mater/Slave mode, Sound Active.

Ideal for discotheques, clubs, bars, parties, Mobile DJs, ect.

Input Voltage: AC100V~240V 50/60Hz

Power consumption: 38.9W

Fuse: T 6.3A

LED: 6 x 3W Tri-color LEDs 30000hrs rated

Dimension: 424 x 251 x 138mm

Weight: 3.8kgs

3. Installation

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is

firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to

which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s

weight. Also always use a safety cable that can hold 12 times of the weight of the unit when

installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place where is out of the

touch of people and has no one pass by or under it.

4. How to Set the Fixture

4.1 Control Panel

○

1Display: To show the various menus and the selected functions

LED:

○

2 DMX

DMX input present

○

3 MASTER

Master Mode

○

4 SLAVE

Slave Mode

○

5 SOUND

Flashing

Sound activation

Button:

○

6 MENU

To select the programming functions

○

7 DOWN

To go backward in the selected functions

○

8 UP

To go forward in the selected functions

○

9 ENTER

To confirm the selected functions

○

10 Microphone: Receive music for the sound active.

○

11 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.

○

12 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.

○

13 Only for remote control: By connect to the CA-8 or CA-9 RTX to control the unit for Stand by,

Function and Mode function.

○

14 Safety Ring: For attached the safety cable.

○

15 Mains output: Connect to supply mains power for the next unit.

○

16 Mains input: Connect to supply mains power.

4.2Main Function

To select any of the given functions, press the MENU button to show the required option on the

display. Select the function with the ENTER button and the display will blink. Use the DOWN and

UP buttons to change the mode. Once the required mode has been selected, Press the ENTER

button to store. To go back to the main menu without any changes press the MENU button. Hold

and press the MENU button about one second or wait for one minute to exit the menu mode. The

main functions are shown below: