ACME E-40D TC DXX Bedienungsanleitung

E-40D TC DXX

User Manual

Feature:

E-40D TC is DMX Version, Uniform light, sharp image edge, and

self-locking focus lens. The product takes advantage of the heat pipe

heat conduction and housing feature to dissipate heat without fan to

prolong LED life.

Light Source: 1 x 20W RGB LED

Color temperature:2800±150K

6000±150K

Beam Angle: 19°/26°/36°/50°

Specification:

Power Voltage: AC 100~240V,50/60Hz

Power Consumption: 32W

Weight: 1.6Kgs

Dimension: 273 x 244 x 140 mm

244

273

140

How To Change The Gobo

At first, put the gobo by hand as the arrow into the gobo gel splint,

and insert the gobo gel splint into the slot of the unit, please turn

the hand knob to left or right in order to take out gobo gel splint.

Main Function

To select any of the given functions, press the MENU button up to

when the required one is showing on the display. Select the function

by ENTER button and the display will blink. Use the DOWN/UP

button to change the mode. Once the required mode has been

selected, press the ENTER button to setup, to go back to the

functions without any change press the MENU button again. Hold

and press the MENU button about one second or wait for one

minute to exit the menu mode.

The main functions are showing below:

DMX Address

Press the MENU button up to when the is shown on the

display. Pressing ENTER button and the display will blink. Use DOWN

and UP button to change the value from 1to 512. Once the mode

DMX Address

Channel Mode

DMX State

Led

Display Inversion

Auto Test

Fixture Hours

Software Version

Dimmer Mode

Manual Mode

White Balance

has been selected, press the ENTER button to setup, to go back to

the functions without any change press the MENU button again.

Hold and press the MENU button about one second or wait for one

minute to exit the menu mode.

Channel Mode

Press the MENU button to show on the display. Press the

ENTER button and the display will blink. Use the DOWN and UP

button to select the 1ch, 2ch, 3ch or 8ch. Once the mode has been

selected, press the ENTER button to setup, to go back to the

functions without any change press the MENU button again. Hold

and press the MENU button about one second or wait for one

minute to exit the menu mode.

DMX State

Press the MENU button up to when the is shown on the

display. Pressing ENTER button, Use DOWN and UP button to select

the (blackout mode)or (last state). Once the mode

has been selected, press the ENTER button to setup, to go back to

the functions without any change press the MENU button again.

Hold and press the MENU button about one second or wait for one

minute to exit the menu mode.

Dimmer Mode

Press the MENU button up to when the is shown on the

display. Pressing the ENTER button. Use DOWN and UP button to

select the (dimmer 1), (dimmer 2), (dimmer

3) or (dimmer 4). Once the mode has been selected, press

the ENTER button to setup, to go back to the functions without any

change press the MENU button again. Hold and press the MENU

button about one second or wait for one minute to exit the menu

mode.

Mode 1(Optically Linear):

The increase in light intensity appears to be linear as DMX value is

increased.

Mode 2(Square Law):

Light intensity control is finer at low levels and coarser at high levels.

Mode 3(Inverse Square Law):

Light intensity control is coarser at low levels and finger at high

levels.

Mode 4(S-cure):

Light intensity control is finger at low levels and high levels and

coarser at medium levels.

LED

Press the MENU button up to when the is shown on the

display. Pressing ENTER button and the display will blink. Use DOWN

and UP button to select (On) or (Off), Once the

mode has been selected, press the ENTER button to setup, to go

back to the functions without any change press the MENU button

again. Hold and press the MENU button about one second or wait

for one minute to exit the menu mode.

Display Inversion

Press MENU button until is blinking on the display. Use the

DOWN and UP button to select (normal) or (inverse),

Once the mode has been selected, press the ENTER button to setup,

to go back to the functions without any change press the MENU

button again. Hold and press the MENU button about one second or

wait for one minute to exit the menu mode.

White Balance

Press the MENU button up to when the is shown on the

display. Pressing ENTER button and the display will blink. Use DOWN

and UP button to select (red), (green),

(blue), ,Once the mode has been selected, press the ENTER button

to setup the value from 125 to 255, to go back to the functions

without any change press the MENU button again. Hold and press

the MENU button about one second or wait for one minute to exit

the menu mode.

Manual Mode

Press the MENU button up to when the is shown on the

display. Pressing ENTER button and the display will blink. Use DOWN

and UP button to select (red), (green), (blue),

(dimmer), (strobe),Once the mode has been selected,

press the ENTER button to setup the value from 0to 255, to go back

to the functions without any change press the MENU button again.

Hold and press the MENU button about one second or wait for one

minute to exit the menu mode.

Auto Test

Press the MENU button up to when the is blinking on the

display. Press the ENTER button and the unit will run the built-in

programmer for self-test. To go back to the functions press the

MENU button.

Fixture Hours

Press the MENU button up to when the is blinking on the

display. Press the ENTER button and the display will show the

temperature of the unit. To go back to the functions press the MENU

button.

Software version

Press the MENU button up to when the is blinking on the

display. Press the ENTER button and the display will show the version

of software of the unit. To go back to the functions press the MENU

button.

DMX Controller

By using a universal DMX controller to control the units, you will

need to set DMX address from 1 to 512 so that the units can receive

DMX signal.

Press the MENU button up to when the DMX Address is showing on

the display. Pressing the ENTER button and the display will blink. Use

the DOWN/UP button to change the DMX512 address. Once the

address has been selected, press the ENTER button to setup, to go

back to the functions without any change press the MENU button

again. Hold and press the MENU button about one second or wait

for one minute to exit the menu mode.

Please refer to the following diagram to address your DMX512

channel for the first 4 units：

Channel

mode

Unit 1

Address

Unit 2

Address

Unit 3

Address

Unit 4

Address

1 channels

2 channels

3 channels

8 channels

DMX 512 Configuration

1 CH MODE (MODE 1):

CHANNEL VALUE FUNCTION

000-007

008-034

035-061

062-088

089-115

116-142

143-169

170-196

197-223

MACRO

2800K

3200K

3600K

4000K

4400K

4800K

5200K

5600K

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACME DJ-Equipment Handbücher

ACME

ACME E-200 MB MC Bedienungsanleitung

ACME

ACME LED-747-1W Bedienungsanleitung

ACME

ACME Dotline 360 Bedienungsanleitung

ACME

ACME THUNDERBOLT Bedienungsanleitung

ACME

ACME LS-608 RGB Bedienungsanleitung

ACME

ACME LED-MS50A Bedienungsanleitung

ACME

ACME LED WAVE 100 Bedienungsanleitung

ACME

ACME Ellipsoidal 10 DMX Bedienungsanleitung

ACME

ACME TB-1010QW II Bedienungsanleitung

ACME

ACME CW-108 Bedienungsanleitung

ACME

ACME Eventx 100 Bedienungsanleitung

ACME

ACME LED-MS150 Bedienungsanleitung

ACME

ACME MH-575S Bedienungsanleitung

ACME

ACME LED-RC8 Bedienungsanleitung

ACME

ACME LED-ST1000 Bedienungsanleitung

ACME

ACME LED-BL4B Bedienungsanleitung

ACME

ACME LED-256D RGB Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME LED-MTX25 IP Bedienungsanleitung

ACME

ACME MH-275R Bedienungsanleitung

ACME

ACME Spartan Hybrid Bedienungsanleitung

ACME

ACME iColorLed 18TC Bedienungsanleitung

ACME

ACME ORION XP-260 BEAM Bedienungsanleitung

ACME

ACME UV-9N Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung