ACME XPerior 700WZA Bedienungsanleitung

XPeriorTM 700WZA Wash

User Guide

Please read these instructions carefully before use

XP-700WZA

CONTENTS

1. Safety Instruction...................................................................................... 3

2. Installation................................................................................................. 5

3. Technical Specification ............................................................................ 6

4. Description ................................................................................................ 9

4.1 Description of the fixture...................................................................... 9

4.2 Control Panel....................................................................................... 9

5. Lamp ........................................................................................................ 10

6. How To Set The Unit ................................................................................11

6.1 Power On Display...............................................................................11

6.2 Main Function.................................................................................... 12

6.3. Home Position Adjustment ............................................................... 21

6.4. Error Information............................................................................... 23

7. Control By Universal DMX Controller ................................................... 23

7.1 Connection ........................................................................................ 24

7.2 Channel Mode Setting....................................................................... 25

7.3 Address Setting ................................................................................. 25

7.4 DMX 512 Configuration ..................................................................... 25

7.5 Lighting Library Download................................................................. 30

8. Update Software...................................................................................... 30

9. Troubleshooting...................................................................................... 30

10. Maintenance and Cleaning................................................................... 32

XP-700WZA

1. Safety Instruction

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty.

The dealer will not accept liability for any resulting defects or problems.

yUnpack and check carefully that there is no transportation damage before using the

unit.

yThe unit is for indoor use only. Use only in a dry location.

yDo install and operate by qualified operator.

yDo not allow children to operate the fixture.

yUse safety chain when fixing the unit. Handle the unit by carrying its base instead of

head only.

yThe unit must be installed in a location with adequate ventilation, at least 50cm from

adjacent surfaces.

yBe sure that no ventilation slots are blocked, otherwise the unit will be overheated.

yBefore operating, ensure that the voltage and frequency of power supply matches the

power requirements of the unit.

yIt’s important to ground the yellow/green conductor to earth in order to avoid electric

shock.

yMaximum ambient temperature TA: 40 . Don’t operate it℃when the temperature is

higher.

yDon’t connect the device to any dimmer pack.

yDuring initial start-up some smoke or smell may arise. This is a normal process and

does not necessarily mean that the device is defective, and it will decrease gradually

within 15 minutes.

yMake sure there are no flammable materials close to the unit while operating to avoid

fire hazard.

yExamine the power wires carefully; replace them immediately if there is any damage.

yUnit’s surface temperature may reach up to 85 . Don’t touch the housing bare℃-handed

Please read carefully the instruction manual, which includes

important information about the installation, usage and maintenance.

XP-700WZA

during its operation, and allow about 15 minutes for cooling the unit down before

replacing bulb or maintenance as it could be very hot.

yAvoid any inflammable liquids, water or metal objects entering the unit. Once it

happens, cut off the mains power immediately.

yDo not operate in dirty or dusty environment; do clean the fixture regularly.

yDo not touch any wire during operation as there might be a hazard of electric shock.

yAvoid power wires twist other cables.

yThe minimum distance between light output and the illuminated surface must be more

than 2.5 meters.

yDisconnect mains power before fuse/lamp replacement or servicing.

yReplace fuse/lamp only with the same type.

yIn the event of serious operating problem, stop using the unit immediately.

yNever turn on and off the unit time after time.

yThe housing, the lenses, or the ultraviolet filter must be replaced if they are visibly

damaged.

yDo not open the unit as there are no user serviceable parts inside.

yNever try to repair the unit by yourself. Repairs carried out by unskilled people can lead

to damage or malfunction. Please contact the nearest authorized technical assistance

center if needed.

yDisconnect the mains power if the fixture is has not been used for a long time.

yDo use the original packing materials before transporting it once again.

Caution

yTo prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or

moisture.

yHot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.

yDo replace the bulb once it is damaged, deformed or life-expired.

yDo not look directly at the light while the bulb is on.

yNever touch bulb with bare fingers, as it is very hot after using.

yDo not start on the unit without bulb enclosure or when housing is damaged.

Product Items

yUser manual

y2 x Omega clamps

XP-700WZA

2. Installation

Unpacking the fixture (for flight case pack only)

1. Stop the flight case via the brake sheet above the wheels.

2. Unlock the lock modules (1) and (2), open the cover board.

3. Prop the cover board with lid bracket and open the side

board.

4. Take out the fixture.

5. Unlock the lock module (3) take out omega clamps, safety

cable and gobo.

Installation:

1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the

holder.

2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock

fasteners (3) into the holes of the base and tighten fully clockwise.

3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the

safety cable (6) through the bottom of the base and over the support.

Fig.1 Fig.2

Attention:

yAlways ensure that the structure to which you are attaching the unit is secure and is

able to support a weight of 10 times of the unit’s weight without any harming

deformation.

yAlso always use a safety cable that can hold 12 times of the weight of the unit when

installing the fixture.

yMake absolute sure that the unit is firmly fixed in way that no vibrating or slipping would

XP-700WZA

occur during operation.

yThe equipment must be installed beyond the areas where persons may walk by or be

seated.

yThe rigging has to be operated by or under the guide of a skilled person.

3. Technical Specification

Power supply

- AC 100V~240V 50/60Hz

Power Consumption

- 845W (230V)

- 877W (120V)

Fuse

- T 6.3A (for transformer)

-T 15A(for lamp)

Lamp

- Philips MSR Gold 700/2 FastFit

Battery backup display

- Setting DMX address or other functions without connecting to mains power.

-Battery for LCD display charges automatically when the fixtures connects to the mains

power.

- No need to change battery.

Wireless control (for the unit with wireless receiver built-in only)

- Wirelessly controlled by W-DMX (option).

- Each W-DMX is sending out 512 channels of DMX.

-License free band of 2.45 GHz

Optical system

- High efficiency optical system, delivering extremely powerful output

- High quality dichroic lenses

- Beam angle: 12°~45°

Movement

- Pan: 540°

- Tilt: 270°

XP-700WZA

- Pan/Tilt moving speed adjustable.

- Automatic Pan/Tilt correction.

- Easy calibration and maintenance by magnetic home positioning.

- Pan/Tilt position lock for transporting protection.

Dimmer/Shutter

- Blackout, 0~100% smooth dimming, independent shutter and various strobe effect.

Color wheel

- Color wheel1: 7 dichroic colors + open.

- Color wheel2: 7 dichroic colors + open.

- Rainbow effect in both directions.

- Easy calibration and maintenance by magnetic home positioning.

CMY

- CMY speed adjustable.

-Optional multiple preset colors and macros available.

Zoom

- Motorized linear zoom for smooth adjustment of beam size and beam sharpness.

Cool

- Fan cooled

Protocols

- DMX 512

- Date input/output: 3/5 Pin XLR socket

Weight

- 35.5kgs

Dimension

- 525× 433×735 mm

Photometric diagram

XP-700WZA

DMX Channels

Mode

Channel Mode 1

16-CH Mode 2

21-CH Mode 3

21-CH

1 Pan Shutter Pan

2 Pan Fine Dimmer Pan Fine

3 Tilt Cyan Tilt

4 Tilt Fine Magenta Tilt Fine

5 Pan/Tilt Speed Yellow Pan/Tilt Speed

6 Shutter 3200K(CTO) Function

7 Dimmer Color 1 Pan/Tilt Macro

8 Color 1 Color 2 Pan/Tilt Macro Speed

9 Color 2 Zoom Color 1

10 Cyan Preset Color Color 2

11 Magenta Color Macro 1 Cyan

12 Yellow Color Macro 2 Magenta

13 3200K (CTO) CMY/CTO Speed Yellow

14 Preset Color Pan/Tilt Macro 3200K(CTO)

15 Zoom Pan/Tilt Macro Speed Preset Color

16 Function Pan CMY/CTO Speed

17 Pan Fine Color Macro

18 Tilt Zoom

19 Tilt Fine Shutter

20 Pan/Tilt Speed Dimmer

21 Function Dimmer Fine

XP-700WZA

4. Description

4.1 Description of the fixture

The head can be locked for transportation protection-the tilt lock button (4) is pressed and

the pan lock/unlock lever (6) is in lock position. To unlock the head, press the tilt unlock

button (5) and move the pan lock/unlock lever (6) to unlock position.

Caution: The head and arm must be unlocked before operation!

4.2 Control Panel

FrontView RearView

○

1 Monitor (Batter Back-up display):

○

2LED

POWER On Power on

DMX On DMX input present

1.Arm

2.Front panel

3.head

4.Tilt lock button (Black)

5.Tilt unlock button (Gray)

6.Pan lock

7.Handle

8.Base

9.Antenna (for XP-700WZA WT only)

Inhaltsverzeichnis

Andere ACME Scheinwerfer Handbücher

ACME

ACME SUPER NOVA RGB Bedienungsanleitung

ACME

ACME LED-ST2000 Bedienungsanleitung

ACME

ACME MEGA STROBE 5000 Bedienungsanleitung

ACME

ACME CB-348TC Bedienungsanleitung

ACME

ACME BARRAGE LED-248 Bedienungsanleitung

ACME

ACME REFracted RLS 100 Bedienungsanleitung

ACME

ACME PAGEANT CM-600z Bedienungsanleitung

ACME

ACME LED-192RGB Bedienungsanleitung

ACME

ACME LED-7474 Bedienungsanleitung

ACME

ACME LED-737 Bedienungsanleitung

ACME

ACME theatre spot 150 TS-150 CW Bedienungsanleitung

ACME

ACME Dragonfly Bedienungsanleitung

ACME

ACME BARRAGE LED-247 Bedienungsanleitung

ACME

ACME Butterfly quard Bedienungsanleitung

ACME

ACME DVS-2500 Bedienungsanleitung

ACME

ACME LED-CTL6 Bedienungsanleitung

ACME

ACME BW-545 Bedienungsanleitung

ACME

ACME CP?64 BD15 Bedienungsanleitung

ACME

ACME TV PANEL200 Bedienungsanleitung

ACME

ACME TV PANEL100 Bedienungsanleitung

ACME

ACME LP-900 Bedienungsanleitung

ACME

ACME Super Splash Bedienungsanleitung

ACME

ACME LED-4TC Bedienungsanleitung

ACME

ACME Dynamic 25 Spin LED?GF25 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung