ACME IL-2420 II Bedienungsanleitung

71-

Innovation, Quality, Performance

IL-2420II

User Guide

Please read these instructions carefully before use

CONTENTS

1. Features...................................................................................................................3

2. General Instructions...............................................................................................4

3. Overview..................................................................................................................5

3.1. Front View....................................................................................................5

3.2 Rear View......................................................................................................8

4. Operation Guide.....................................................................................................8

4.1 Programming Mode .....................................................................................8

4.2 Setting a scene.............................................................................................9

4.3 Program a Scene with Movement ...........................................................10

4.4 Program a Scene.......................................................................................11

4.5 Copy a Scene.............................................................................................12

4.6 Delete a Scene...........................................................................................13

4.7 Bank copying ..............................................................................................14

4.8 Program a Chase.......................................................................................15

4.9 Program all the Scenes in a Bank...........................................................17

4.10 Program a step.........................................................................................18

4.11 Insert Steps into a Chase........................................................................19

4.12 Delete Steps from Program....................................................................21

4.13 Delete a CHASE ......................................................................................22

4.14 Program a Preset.....................................................................................23

4.15 Preset Editing...........................................................................................24

4.16 Program a Fixture Group........................................................................26

4.17 FIXTURE GROUP Editing......................................................................27

4.18 Program a Center ....................................................................................28

4.19 Center Editing...........................................................................................29

4.20 Program an Override...............................................................................31

4.21 Override Editing........................................................................................32

4.22 Program a CUE........................................................................................34

4.23 CUE Editing ..............................................................................................35

4.24 Delete a CUE............................................................................................36

4.25 Store a Blackout Scene...........................................................................36

5. Setting Menu.........................................................................................................37

70-

69-

Technical Specification

Power Input .................…………………………..….. 100-240VAC 50/60Hz

Fuse.................……………………………………..….T1A 250V 5x20mm

DMX Output .........................................………………. 3 pin female XLR

Stand Alone…………………………………………… 5 pin male XLR

MIDI Signal ................................……….….…….... …5 pin standard interface

Audio Input .....................………………..... …………By built-in microphone or line in

Dimensions.....................………………..... ………… 483x263x100mm

Weight......... ...................……............ ...................… 5.8 kg

5.1 Create a new Fixture Profile.....................................................................39

5.2 Modify a Fixture Profile..............................................................................40

5.3 Delete a Fixture Profile..............................................................................41

5.4 Patch a Fixture ...........................................................................................42

5.5 Reverse channel setup..............................................................................43

5.6 Fade mode setup.......................................................................................44

5.7 Blackout mode select ................................................................................45

5.8 Midi channel select ....................................................................................45

5.9 Chase run by inside/outside time.............................................................46

5.10 Auto remote address...............................................................................46

5.11 Read SD card...........................................................................................47

5.12 Write SD card...........................................................................................49

5.13 Modify Password......................................................................................50

5.14 Enable Password.....................................................................................51

5.15 Erase all memory.....................................................................................52

5.16 Audio input range adjust.........................................................................52

5.17 Channel value display mode..................................................................53

6. Function Mode......................................................................................................53

6.1 Running scene............................................................................................53

6.2 Run Program...............................................................................................56

6.3 Running CUE..............................................................................................58

6.4 Over control.................................................................................................58

7. Fog Machine operation........................................................................................59

8. Strobe light operation...........................................................................................59

9. Super Password...................................................................................................62

10. Update the software with SD card...................................................................62

11. PROFILE Create notice ....................................................................................63

1. Features

z2 x DMX Outputs

z484 DMX Channels in total, including 481Ch. for DMX fog, 482Ch. for future use,

483-484Ch. for DMX strobe

zFixture Library ( for built-in ACME lighting fixtures; Other brand fixtures can be set

manually but Max. with 50 fixtures）

zBuilt-in 10 MOVEMENTS - Can adjust PAN/TILT Position、PAN/TILT Range、Fade

time or Wait time、LOOP

z60 Programmable Chases, each chase can have 200 scenes max.

z1200 Programmable Scenes ( 60 banks x 20 scenes )

z400 Programmable Presets ( 20 presets, each preset has 10 colors and 10 gobos )

zControl 20 DMX light fixtures, and each fixture up to 24 Channels

zOperate 20 Fixture groups simultaneously

z24 faders for controlling 24 DMX channels

z60 x CUEs (Combined many chases together and operate the chases one by one.)

z20 x override – Can assign one (or more than one) of the fixtures to perform special

function, like follow spot, during the operation. 20 overrides can be set in the controller

z20 x Center - Can set each fixture’s central position of the movement; you can set up

to 20 centre positions.

zRemote DMX Addressing ONLY FOR ACME LIGHTS

zStand By mode set - 1. For Pan/ Tilt home position 2. For PAN/TILT CENTER Position

3. PRESET Position.

zCan use jog wheel to adjust the audio sensitivity (LCD display will indicate the value )

zCan set Password to boost the controller

zLock/Unlock memory/ Need password to clear all memory

zStandard MIDI facility

zLighting Library and software downloaded available

zDMX fog machine control （481 Ch.）

zBoth DMX ( 483 & 484 ) and analog strobe control available ( Via LCD display, people

can adjust the speed of analog strobe )

z2 remote Easy Controller ( CA-8 )

zGooseneck USB LAMP

NOTE: Some basic knowledge of MIDI and DMX is required to fully utilize this unit.

68-

EC Declaration of Conformity

We declare that our products (lighting equipments) comply with the following

specification and bears CE mark in accordance with the provision of the

Electromagnetic Compatibility (EMC) Directive 89/336/EEC.

EN55103-1:199601-2; EN55103-2:1996;

EN61000-3-2:2000+A2:2005;

EN61000-3-3:1995+A1:2001+A2:2005.

Harmonized Standard

EN 60598-1: 2004

IEC 60598-1:2003+ corrigendum 2004

Part 1:General requirements and test

Following the provisions of the low voltage directive 73/23/EEC and 93/68/EEC

67-

; N "F_A"; "FUNCTION A"

; N "F_B"; "FUNCTION B"

; N "F_C"; "FUNCTION C"

; N "F_D"; "FUNCTION D"

; N "F_E"; "FUNCTION E"

; N "F_F"; "FUNCTION F"

; N "F_G"; "FUNCTION G"

; N "F_H"; "FUNCTION H"

; N "F_I"; "FUNCTION I"

; N "F_J"; "FUNCTION J"

; N "F_K"; "FUNCTION K"

; N "F_L"; "FUNCTION L"

;Note:

;1. All the character must be capitalization except commentary which after”;”.

;2. The finished file should use a short name below 8 characters, all use capital letters and

suffix with CIF transitorily, or the controller can’t read up the profile information.

;3. Don’t change the group which contain”;********”.

;4. Display information should be no more than 4 character and without blank.

2. General Instructions

Please read the user manual carefully, as it includes important information regarding details

of operation, maintenance, and technical data. Keep this manual with the unit for future

consult.

WARNINGS！

♦DO NOT make any inflammable liquids, water or metal objects enter the unit.

♦Should any liquid be spilled on the unit, DISCONNECT the power supply to the unit

immediately.

♦STOP using the unit immediately In the event of serious operation problems and either

contact your local dealer for a check or contact us directly.

♦DO NOT open the unit--there are no user serviceable parts inside.

♦NEVER try to repair the unit yourself. Repairs by unqualified people could cause

damage or faulty operation. Contact your nearest dealer.

CAUTIONS！

♦This unit is NOT intended for home use.

♦After having removed the packaging check that the unit is NOT damaged in any way. If

in doubt, DON'T use it and contact an authorized dealer.

♦Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left

within children's reach, as it can be dangerous.

♦This unit must only be operated by adults. DO NOT allow children to tamper or play

with it.

♦NEVER use the unit under the following conditions:

In places subject to excessive humidity.

In places subject to vibrations or bumps.

In places with a temperature of over 45 C/113 F or less than 2 C/35.6 F.

Protect the unit from excessive dryness or humidity (ideal conditions are between35%

and 80%).

♦DO NOT dismantle or modify the unit.

3. Overview

3.1. Front View

1. Fog Machine Button Activates Fog Machine.

2. STROBE Button Trigger strobe.

3. Fixture Group Button Select /set one or more fixtures group

4. Fixture Button Select one or more fixtures

5. Preset Button Select/set the color & gobo preset.

6. movement Button Select/set the pan & tilt movement

7. Chase Button Run Chase and save Scene to Chase

8. Cue Button Save several Chases together and make them

run at the same time

9. Bank Button Press the Bank buttons to load or stored your

scenes. There are a maximum of 1200

programmable scenes.

10. Override Button Override the fixture/ fixtures when the show is

running.

66-

; N "SHUT"; "SHUTTER"

; P "PAN"; "PAN"

; PF "P_F"; "PANFINE"

; T "TILT"; "TILT"

; TF "T_F"; "TILTFINE"

; PT "PT_S"; "P/T SPEED"

; G "GB1"; "GOBO1"

; G "RGB1"; "GOBO 1 ROT"

; G "GB2"; "GOBO2"

; G "RGB2"; "GOBO 2 ROT"

; G "GB3"; "GOBO3"

; G "ROB3"; "GOBO 3 ROT"

; C "COL1"; "COLOUR1"

; C "COL2"; "COLOUR2"

; C "CYAN"; "CYAN"

; C "YELO"; "YELLOW"

; C "MAGT"; "MAGENTA"

; C "CYMM"; "CMYMACRO"

; N "FROS"; "FROST"

; N "PRSM"; "PRISM"

; N "RPRS"; "PRISMROT"

; N "FCUS"; "FOCUS"

; N "IRIS"; "IRIS"

; N "BANG"; "BEAM ANGLE"

; N "CTC"; "CTC"

; N "REFT"; "EFFECTROT"

; N "EFFT"; "EFFECT"

; N "FRAM"; "FRAME1"

; N "F_AG"; "FRAME1ANGLE

; PT "PT_M"; "PT_MACRO"

; N "ZOOM"; "ZOOM"

; N "SPED"; "SPEED"

; N "CONT"; "CONTROL"

; N "MACO"; "MACRO"

65-

12 G "R_G2"; "GOBO 2 ROT"

13 G "RG2L"; "GOBO 2 ROT LOW"

14 N "EFFT"; "EFFECT"

15 N "R_EF"; "ROTEFFECT"

16 N "IRIS"; "IRIS"

17 N "FCUS"; "FOCUS"

18 N "ZOOM"; "ZOOM"

19 P "PAN"; "PAN"

20 PF "P_F"; "PANFINE"

21 T "TILT"; "TILT"

22 TF "T_F"; "TILTFINE"

23 PT "PT_S"; "SPEED P/T"

24 N "SPED"; "SPEED"

DMXEND ;********

END ;********

; ARRT CODE

; D = DIMMER

; P = PAN

; PF = PAN FINE

; T = TILT

; TF = TILT FINE

; PT = OTHER PAN/TILE CORRELATION CHANNLES

; G =ALL GOBO CORRELATION CHANNLES

; C = ALL COLOR CORRELATION CHANNLES

; N = ETCAETERAS CHANNELS

;

; ARRTCODE MAX2CHARACTER

; | DISPLAY INFORMATION MAX 4 CHARACTER DON'T HAVE BLANK

; | | CHANNEL FUNCTION

; | | |

; D "DIM"; "DIMMER"

11. Center Button Select/set the pan & tilt center.

12. Manual/Rec Button Used to control manual operation or to record

programs.

13. Program Button Activates Program mode.

14. Music/Bank Copy Button Activates Music mode or to copy a bank of

scenes.

15. Tap/Insert Button Used to create a standard beat or insert a scene to

chase.

16. Auto/Del Button Activates Auto mode or to delete scenes or

chases.

17. Blackout/ Stand Alone Button Select Blackout/Stand Alone two modes.

18. USBLight ConnecttoUSBLight

19. Faders These faders are used to control the intensity.

20. SDcard SDcardportcanbeusedtoupgradesoftware,

copy data and introduce to light bank

21. Stand alone Extra easy controllers Incorporated for

Master/Slave immediate. pre-programmed light

shows.

22. Multi function number buttons （1-20）

Function buttons The descriptions of the Function buttons

1 Fixture Select 20 units of Fixtures Pls refer to the following table for

Fixture addresses

2 Fixture Group Set or select 20 Fixture Groups

3 Movement (only 1-10) Select or operate 10 Movements

4 Preset 20 groups of fixtures can be set or selected by Jog wheel

PAN .10 color Preset(1-10) and 10 GOBO Preset(11-20)

each group

5 Cue Set, select or operate 60 Cues

6 Chase Set, select or operate 60 Chases

7 Override Set and select 20 Overrides

8 Bank 60 banks( each bank with 20scenes) can be set and selected

Fixture number channel list

23. ESC/CLEAR Button Back to last menu/delete all the output when

program

24. Enter/main menu Button Confirm or enter next menu or enter main menu

25. LCD Display Show the current activity or programming state.

26. Jog wheel Used to adjust the chase speed within the range

of 0.1 second to 5 minutes.

by Jog wheel #1

9 center Set, select and operate 20 Centers

10 Number 1-20

button

1. 1-10（10 stand for 0）Number for setting and inputting

password

2. 1-10 10 MOVEMENT can be selected.

3. 1-10 can be used to select 10 groups of COLOR

PRESET; 11-20 can be used to select another 10 groups

of GOBO PRESET.

4. 1-20 can be used to select 20 CUE/PAGE、

CHASE/PAGE、SCENE/BANK、OVERRIDE、CENTER、

FIXTURE.

Fixtures

number buttons Fixture DMX

channels Fixtures number

buttons Fixture DMX

channels

1 1-24 11 241-264

2 25-48 12 265-288

3 49-72 13 289-312

4 73-96 14 313-336

5 97-120 15 337-360

6 121-144 16 361-384

7 145-168 17 385-408

8 169-192 18 409-432

9 193-216 19 432-456

10 217-240 20 457-480

64-

11.7 The format of SD card should be FAT16 but not FAT32.

IL-2420II PROFILE ;********

VER1.0 ;********

; ADD ACMEAND OTHER LIGHT LIBBER SELECT

DEFAULT ACME; ACME AND OTHER

; FACTORY/MODEL MODEL=MAX16CHARACTER

NAME "AMCE" "IM-1200SZ-24"

; LIGHT CHANNEL NUMBER MAX 24

CHANNEL 24

DMX ;********

; DMX CHANNELS LIST

; CHANNEL MAX 24 DON'T REPEAT MAX 2 CHARACTER

;| ARRTCODE MAX2CHARACTER

; | | DISPLAY INFORMATION MAX 4 CHARACTER DON'T HAVE BLANK

; | | | CHANNEL FUNCTION

;| | | |

1 N "SHUT"; "SHUTTER"

2 D "DIM"; "DIMMER"

3 C "C_C"; "CYAN"

4 C "C_M"; "MAGENTA"

5 C "C_Y"; "YELLOW"

6 C "CTC"; "CTC"

7 C "COLR"; "COLOUR"

8 G "GOB1"; "GOBO1"

9 G "R_G1"; "GOBO 1 ROT"

10 G "RG1L"; "GOBO 1 ROT LOW"

11 G "GOB2"; "GOBO2"

63-

11. PROFILE Create notice

11.1 PROFILE.CIF(as the profile cyclostyle)

The finished file should use a short name below 8 characters, All use capital letters

and suffix with CIF transitorily. (IL-2420 controller nonsupport long file name) or the

controller can’t read up the profile information.

11.2 IM-1200S.CIF is the profile of ACME IM-1200S

11.3 Enactment special code, so the controller should distill some channel

characteristic to manage.

; ARRT CODE

;D =DIMMER DIMMER

;P =PAN PAN

;PF=PANFINE PANFINEin16channelmode

;T =TILT TILT

; TF = TILT FINE TILT FINE in 1 6 channel mode

; G = ALL GOBO CORRELATION CHANNLES transfer all gobo correlation channel

to preset gobo

; C = ALL COLOR CORRELATION CHANNLES transfer all color correlation channel

to preset gobo

; N = ETCAETERAS CHANNELS else channels should be signed N

11.4 The channel display message should be no more than 4 capital letters or

underline or number, and must be bracket with double quotation marks. Don’t

replace by blank if shorter 4 character.

You’d better input in English mode, ensure all the input characters are DBC but not SBC

case

①"DIM" ;right

②"DIM" ;wrongfortheblank

③"dim" "DIm" ;wrong for the lowercase

④“DIM”;wrong for the SBC double quotation marks

11.5 Don’t change the group which contain”;********”

11.6 Store the profile that you want to input to the controller under the root directory

of SD card.

EXP: If SD card is disk F, then the file input route should be “F:\DIR2402\IM-1200S”

3.2 Rear View

1. Powerin AC100-240V 50/60Hz.

2. PowerSwitch This switch turns On/Off the power.

3. STROBE Trigger non-DMX strobe. Signal +12V DC.

4. AUDIO 0.1V~1Vp-p.

5. MIDI IN or MIDI THRU Receives MIDI data.

6. DMXOut Two connectors sends DMX signals to DMX

fixtures, use 3 pin XLR plug cable to link the

fixture together.

7. STAND ALONE The connectors are used only in master/slave

mode, using 5 pin XLR cable microphone jack of

the first fixture, you will find that the remote

control on the first unit will control all the other

units for Stand by, Function and Mode.

4. Operation Guide

IL2420 Operating Steps Instructions

When power is turned on, the controller starts self testing automatically, the LCD Display

indicating the self testing progress. After it is finished, the fixture pilot on the rear board is

on, which means that you can start to operate the controller.

4.1 Programming Mode

Press PROGRAM button for 3 seconds, the LED above this button

lights flickers indicating Program in active.

4.2 Setting a scene

1. Enter Program mode.

2. Press the button 1-20 to select Fixture，you can select several

fixtures at a time by tapping of these buttons.

3. Slide Faders 1-24 or use the CENTER or PRESET or

SCENE have saved to change the output of each channel。You

can also use the jog wheel #1 、#2 to control the PAN、PAN FINE

or use the jog wheel #3 ，#4 to control TILT、TILT FINE.

4. Once the scene is satisfactory, press MANUAL/REC button to

program this scene into memory. At this moment, the LEDs on

CUE、OVERRIDE、CENTER、FIXTURE GROUP、PRESET、

CHASE、BANK、BLACKOUT button flicker at the same time.

5. Press BANK use the Jog wheel #1 to select the BANK number to

save the scene.

6. Press the number button 1-20 to select the Scene number going

to be saved，all LEDs and the Segment Display will flicker three

times briefly indicating this operation, then the LCD will show the

bank and the scene number of the programmed scene.

7. Repeat steps 2-6 to program other scenes.

8. Press PROGRAM button for 3 seconds to exit Program mode,

the LED goes out indicating this selection。

62-

9. Super Password

Power off, and Press Enter/main manual and Auto/Del and

numberButton1 at the same time，Power on afresh, input the

super password (888888) as the LCD indicate, then the power

password and memory password changed into “111111” and

password protect state become DISABLE

Password type Default

password

password protect state

Power on password 111111 Disable

Memory protect password 111111 Disable

10. Update the software with SD card

Format the program of the controller , then download the last

software and copy to SD：\SUP2420\APP24202.SUP，inset the

SD card to the seat, press FIXTURE and OVERRIDE and

number button 15 then Power on afresh until the information

show on the LCD display, the controller will test if the SD card

stick well and then update the new software, it will cost about 20

seconds, please don’t move the SD card or cut the power in order to avoid update

frustrated and damage the SD card.

Save the program first, or updating the software may lead the memory program useless.

Please refer to “Write SD card” and “Read SD card” to operate.

NOTICE：The format of the SD card should be FAD12 or FAD16, but not FAD32 and

NTFS, be sure there is no long-name files under the root directory (the amount of the

name below 8), the character must be start with letters, and compose with letters or

number or underline.

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME LED-245/2 Bedienungsanleitung

ACME

ACME LED-767 RGBW Bedienungsanleitung

ACME

ACME LED-747-1W Bedienungsanleitung

ACME

ACME ASTRO LED-256D Bedienungsanleitung

ACME

ACME IM-250 SP Bedienungsanleitung

ACME

ACME LIGHT PANEL 1000 Bedienungsanleitung

ACME

ACME DMX512 Dynamic Scan Bedienungsanleitung

ACME

ACME SAMURAI SCAN 50 Bedienungsanleitung

ACME

ACME CB-16TC Bedienungsanleitung

ACME

ACME COOLIE 14FC Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME Dragon Scan 50 LED-SC50B Bedienungsanleitung

ACME

ACME LED Move 600SE Bedienungsanleitung

ACME

ACME Solaris Bedienungsanleitung

ACME

ACME LED-275 D Bedienungsanleitung

ACME

ACME Spartan Hybrid Bedienungsanleitung

ACME

ACME DAZZLED COLORLED-430 Bedienungsanleitung

ACME

ACME BTDG40 Bedienungsanleitung

ACME

ACME LED-PS10 Bedienungsanleitung

ACME

ACME PEXEL 100 Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME Theatre Spot 150m Bedienungsanleitung

ACME

ACME V-BOX Bedienungsanleitung

ACME

ACME XP-5000SZ F Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung