ACME Spartan Hybrid Bedienungsanleitung

- 1 -

CONTENTS

01/ Safety Instructions.................................................................................................. 2

02/ Technical Specifications ........................................................................................ 5

03/ Control Panel........................................................................................................... 7

04/ Effect Wheels & Lamp ........................................................................................... 8

4.1 Effect Wheels................................................................................................... 8

4.2 Light Source...................................................................................................... 9

4.3 Lamp Replacement.......................................................................................... 9

05/ How To Set The Unit............................................................................................ 11

5.1 Main Functions .............................................................................................. 11

5.2 Home Position Adjustment ......................................................................... 22

06/ Control By Universal DMX Controller.............................................................. 27

6.1 DMX512 Connection................................................................................... 27

6.2 Address Setting.............................................................................................. 28

6.3 DMX512 Configuration............................................................................... 28

07/ Error Information .................................................................................................. 47

08/ Troubleshooting ....................................................................................................55

09/ Fixture Cleaning....................................................................................................56

- 2 -

01/ Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer

will not accept liability for any resulting defects or problems.

Unpack and check carefully to ensure that there is no transportation damage before

using the unit.

This product is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of

head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from

adjacent surfaces.

Be sure that no ventilation slots is blocked, otherwise the unit will be overheated.

Before operation, ensure that you are connecting this product to the proper voltage in

accordance with the specifications in this manual or on the product’s specification label.

It’s important to ground the yellow/green conductor to earth in order to avoid electric

shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃. Do

not operate this product at a lower or higher temperature.

DO NOT connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does

not necessarily mean that the device is defective, and it will decrease gradually within 15

minutes.

Keep flammable materials away from the fixture while operating to avoid fire hazard.

Make sure the power cord is not crimped or damaged; replace it immediately if damaged.

Please read the instruction carefully which includes important information

about the installation, usage and maintenance.

- 3 -

Unit’s surface temperature may reach up to 90 ℃. DO NOT touch the housing

bare-handed during its operation.

Avoid any flammable liquids, water or metal from entering the unit. Once it happens, cut

off the mains power immediately.

DO NOT operate in a dirty or dusty environment. DO clean the fixture regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid entanglement of the power cord with other wires.

The minimum distance to objects/surface must be more than 18 meters.

Disconnect mains power before fuse/lamp replacement or servicing.

Replace fuse/lamp only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly

damaged.

DO NOT open the housing as there are no user serviceable parts inside.

DO NOT attempt to operate this unit if it becomes damaged. DO NOT attempt any

repairs yourself. Repairs carried out by unskilled people can lead to damage or

malfunction. Please contact the nearest authorized technical assistance center if needed.

Disconnect this product from its power source before servicing.

DO use the original packaging if the device is to be transported.

Hot lamp explosion hazard. DO NOT open the unit within 15 minutes after switching off.

DO replace the bulb once it is damaged, deformed or life-expired.

Avoid direct eye exposure to the light source while the product is on.

Never touch bulb with bare fingers, as it is very hot after using.

DO NOT operate this product if you see damage on the housing, shields, or cables. Have

the damaged parts replaced by an authorized technician at once.

- 4 -

Installation:

DO install and operate by qualified operator. Fixture(s) should be installed in areas

outside walking paths, seating areas, or away from areas were unauthorized personnel

might reach the fixture by hand. NEVER stand directly below the fixture(s) when rigging,

removing or servicing.

Always ensure that the unit is firmly fixed to avoid vibration and slipping off during

operation. Ensure that the trussing or area of installation must be able to hold 10 times

the weight without any deformation. Always attach a safety cable that can hold at least

12 times the weight of the fixture whenever installing this fixture in a suspended

environment to ensure that the fixture will not fall if the clamp fails.

- 5 -

02/ Technical Specifications

Power Voltage

100-240V~ 50/60Hz

Power Consumption

660W

Light Source

Philips MSD Platinum 20 R

Color Temperature

7800K

Zoom Range

2°-7° (Beam Mode)

5°-32° (Spot Mode)

8°-70° (Wash Mode)

Dimmer/Strobe

0-100% smooth dimming; outstanding strobe effect with variable

speed

Color Wheel

3 color wheels, each wheel has 5 colors plus open, with rainbow

effect

Gobo Wheel

Static Gobo Wheel

18 gobos plus open

Rotating Gobo Wheel

7 gobos plus open, convenient replacement

Movement

Pan

540°

Tilt

270°

Pan/Tilt Resolution

16 bit

Automatic pan/tilt position correction

Fixation

Tilt lock

Control

DMX Channel

34/30/27/24 Channels

Control Mode

DMX512

RDM

Wireless Control (optional)

Firmware Upgrade

Firmware Upgrade via DMX link

Construction

Display

LCD display

Battery backup for user setup without mains connection

Data In/Out

3-pin/5-pin XLR

Power In/Out

Power Cord in

Protection Rating

IP20

- 6 -

Features

Linear CMY color mixing

Motorized focus

Independent frost effect

2 x prisms:

6-facets prism + 8-facets prism, capable of bidirectional rotation

and superposition

Dimensions

399.5x335x666.5mm

15.7"x13.2"x26.2"in

Weight

27kgs

59.5lbs

Photometric Diagram:

- 7 -

03/ Control Panel

1. Display

To show the various menus and the selected function

2. Buttons

To enter into move backward or leave the menu

UP

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

3. BATTERY DISPLAY

4. DMX IN

For DMX512 link, use 3/5-pin XLR cable to link the unit and DMX

controller to input DMX signal

5. DMX OUT

For DMX512 link, use 3/5-pin XLR cable to link the next units to

output DMX signal

6. POWER

To connect to supply power

7. FUSE(T 10A)

Protects the unit from damage of over-voltage or short circuit

8. POWER

SWITCH

Turns on/off the power

- 8 -

04/ Effect Wheels & Lamp

4.1 Effect Wheels

YELLOW

LIGHT

GREEN

PINK

AQUA

MARINE

DARK

ORANGE

LIGHT

ORANGE

R-Gobos

Part Number

①Gobo1

3011000675

②Gobo2

3011000678

③Gobo3

3011000834

④Gobo4

3011000673

⑤Gobo5

3011000672

⑥Gobo6

3011000726

⑦Gobo7

3011000674

DANGER!

Install the rotating gobos with the device switched off only.

Unplug from mains before changing the rotating gobos!

- 9 -

4.2 Light Source

Philips MSD Platinum 20 R

Because of its high internal pressure, there might be a risk that the discharge lamp would

explode during operation. The lamp emits intense UV radiation which is harmful to the eyes

and skin. The high luminance of the arc can cause severe damage to the retina if you take a

close look at the lamp.

To protect the lamp, always turn off the lamp first (via control panel or DMX controller)

and let the unit run at least five minutes to cool down before switching off the mains

supply. Never handle the lamp or luminary when it is hot.

Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured

alcohol and wipe it with a lint free cloth before installation.

The lamp generates UV radiation. Never operate the lamp without appropriate shielding.

When lighting up, the lamp operates at high pressure and there is a slight risk of arc tube

rupture. The risk increases with age, temperature and improper handling of the lamp. Do

not use the lamp longer than its lifespan.

Make sure the lamp is located in the center of the reflector for the best projection.

4.3 Lamp Replacement

Do not use this lamp more than 1500 hours, using the lamp any longer than its set life could

seriously damage the fixture. Periodically checking the lamp running time, when the lamp

reaches the 1500 hour mark, or close to it, we strongly suggest you switch the lamp out.

Reset the lamp time after you have replaced the lamp.

To replace the lamp:

Ensure that the fixture is detached from power and has cooled down completely. It is a good

idea to allow the fixture to run for 15 minutes after the lamp has been turned off, so that the

cooling fans have time to works.

ATTENTION

The entire light path and lens of the luminaire must be thoroughly cleaned

before replacing the lamp.

Andere Handbücher für Spartan Hybrid

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME LED-275 D Bedienungsanleitung

ACME

ACME SABER HYBRID PRO Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME Solar Flare Bedienungsanleitung

ACME

ACME Pageant CM-200Z Bedienungsanleitung

ACME

ACME DAZZLED COLORLED-430 Bedienungsanleitung

ACME

ACME LED-256D-10W Bedienungsanleitung

ACME

ACME DOT Bedienungsanleitung

ACME

ACME LP-F1000 CW Bedienungsanleitung

ACME

ACME LED-245/2 Bedienungsanleitung

ACME

ACME Splendor 220 II Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

ACME

ACME LED-767 RGBW Bedienungsanleitung

ACME

ACME ANIMA C Bedienungsanleitung

ACME

ACME LED-SC252 Bedienungsanleitung

ACME

ACME Spartan Hybrid C Bedienungsanleitung

ACME

ACME BTDG40 Bedienungsanleitung

ACME

ACME Gemini Bedienungsanleitung

ACME

ACME Xperior XP-380 BEAM IP F Bedienungsanleitung

ACME

ACME LED-HC50 II Bedienungsanleitung

ACME

ACME GLORV FRAMING XP-5000SZF Bedienungsanleitung

ACME

ACME Thunderstruck LP-2304 Bedienungsanleitung

ACME

ACME Dotline180 Bedienungsanleitung

ACME

ACME XP-5000SZ F Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung