ACU-RITE 01123 Bedienungsanleitung

future forecast

OCT

Instruction Manual

Weather Station

model 01123

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor...... 2

Features & Benets: Display ..... 3

Setup .................................... 5

Sensor Setup ......................... 5

Display Setup ........................ 6

Set the Time, Date & Units ...... 7

Backlight Settings................... 7

Placement Guidelines ............. 8

Using the Weather Station...... 9

Troubleshooting ....................10

Care & Maintenance.............11

Calibration ...........................11

Specications........................11

FCC Information ...................12

Customer Support .................12

Warranty..............................12

Questions? Contact Customer Support at

www.AcuRite.com/support or email suppor[email protected]

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best

possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this

product. Locate the tab and peel off to remove.

Package Contents

1. Display with Fold-Out Stand

2. Outdoor Sensor

3. Instruction Manual

4. Power Adapter

PRODUCT MUST BE REGISTERED

IMPORTANT TO RECEIVE WARRANTY SERVICE

PRODUCT REGISTRATION

www.AcuRite.com

Features & Benets

OUTDOOR SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being sent

to the display.

3. Battery Compartment

4. A-B-C Switch

ID code that must match display’s

A-B-C switch to ensure units synchronize.

5. Battery Compartment Cover

nrT

UL I

-------22

/\. V

1, 1, 1, 1, 1, 1, I J

future forecast

Features & Benets 17 16 15

6 7 8 9 10

FRONT OF DISPLAY

1. Current Outdoor Temperature

Arrow icon indicates the direction

temperature is trending.

2. Low Record Indicator

Indicates today's low records are

being viewed.

3. Current Outdoor Humidity

Arrow icon indicates the direction

humidity is trending.

4. Sensor Low Battery Indicator

5. Date

6. Clock

7. and OK Button

For setup preferences.

8. and Buttons

For setup preferences and viewing

high & low records.

9. Button

For momentary backlight and dimmer

settings.

10. Display Low Battery Indicator

11. Current Barometric Pressure

Displays current barometric pressure

and indicates whether pressure is rising

or falling.

12. Current Indoor Humidity

Arrow icon indicates the direction

humidity is trending.

13. High Record Indicator

Indicates today's high records are

being viewed.

14. Current Indoor Temperature

Arrow icon indicates the direction

temperature is trending.

15.

AUTO

Icon

Indicates display is in auto-dimming

brightness mode (see page 7).

16. 12 to 24 Hour Weather Forecast

Self-calibrating forecasting pulls data

from the outdoor sensor to generate

your personal forecast.

17. Outdoor Sensor Signal Strength

•

-L

Ir -

---

Features & Benets

63 2

BACK OF DISPLAY

1. Integrated Hang Hole

For easy wall mounting.

2. RESET Button

For full reset to factory defaults.

3. Backup Battery Compartment

4. Fold-out Tabletop Stand

5. Power Adapter

6. Plug-in for Power Adapter

7. A-B-C Switch

ID code that must match sensor’s

A-B-C switch to ensure units

synchronize.

8. Battery Compartment Cover

(not shown)

•

B~~f~~~S

It(•Q¥•¥&•

ALKALINE

BATTERIES

(70°C) 1S8°F I

SETUP

Sensor Setup

Set the A-B-C Switch

The A-B-C switch is located inside

the battery compartment. It can

be set to A, B or C. However,

you must select the same letter

choices for both the sensor and

the display in order for the units

to synchronize.

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries for

the best product performance.

Heavy-duty or rechargeable

batteries are not recommended.

The sensor requires lithium

batteries in low-temperature

2 Install Batteries

2 AA batteries

conditions. Cold temperatures

can cause alkaline batteries

to function improperly. Use

lithium batteries in the sensor for

temperatures below -4ºF / -20ºC .

1. Slide off the battery

compartment cover. Take

note of the A-B-C switch

setting inside the battery

compartment.

2. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

1 A-B-C Switch

Set to match

display

A B C

• •

•

• 0

J J

•

J J

•

I I

IMPORTANT: Batteries are a backup power source to preserve records in the event of a

power outage. Power adapter is recommended as the primary power source to enjoy the

full functionality of this product.

Plug in

Power Adapter

A B C

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that will not be

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used

batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in re,

as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge

non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Display Setup

1 Set the A-B-C Switch

Locate the A-B-C switch inside

the battery compartment. Set

the A-B-C switch to A, B or C.

You must select the same letter

choices for both the display and

the sensor in order for the units to

synchronize.

2 Install or Replace Backup

Batteries (optional)

1. Remove the battery

compartment cover.

2. Insert 3 x AAA alkaline

batteries into the battery

compartment, as shown. Follow

the polarity (+/–) diagram in

the battery compartment.

3. Replace the battery cover.

3 Plug in Power Adapter

For the best performance, plug

in the power adapter as the main

power source for this product.

1 A-B-C Switch

Set to match

sensor

2 Install Backup Batteries

3 AAA Batteries

(optional)

/\.

V 0

Set the Time, Date & Units

Press and release the “ ” button, located on the front of the display, to enter

SET MODE. Once in set mode, the preference you are currently setting will

blink on the display.

To adjust the currently selected (ashing) item, press and release the “ ” or

“ ” buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “ ” button to adjust the next

preference. The preference set order is as follows:

AUTO CHANGE for DST? (Daylight Saving Time Y or N)*

CLOCK HOUR

CLOCK MINUTE

CALENDAR MONTH

CALENDAR DATE

CALENDAR YEAR

TEMPERATURE UNITS (ºF or ºC)

PRESSURE UNITS (inHg or hPa)

*If you live in an area that observes Daylight Saving Time, DST should be set

to Y, even if it is not currently Daylight Saving Time.

You will automatically exit SETUP MODE if no buttons are pressed for 10

seconds. Enter setup mode at any time by pressing the “SET” button.

Display Backlight Settings

This weather station’s color display features three different lighting settings:

High (100%) brightness, Medium (60%) brightness and Low (30%) brightness.

When display is powered with the power adapter, backlight remains on at

100% brightness. Press the button once to dim to 60% brightness; press

again to dim to 30%, press a third time to enter AUTO-DIM mode. “ ” will

appear above the clock. AUTO

AUTO DIM MODE: Automatically adjusts display brightness based on time of day.

6:00 a.m. - 9:00 p.m. = 100% brightness

9:01 p.m. - 5:59 a.m.= 30% brightness

1111

\ I /

--o,,,.

/ I \'

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of both the display and the outdoor sensor are critical to the

accuracy and performance of this product.

Display Placement

Place the display in a dry area free of dirt and dust. Display

stands upright for tabletop use or is wall-mountable.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions.

Sensor is water-resistant and is designed for general outdoor

use, however, to extend its life place the sensor in an area

protected from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or

by using string (not included) to hang it from a suitable location,

like a well covered tree branch. The best location is 4 to 8 feet

(1 to 2 meters) above the ground with permanent shade and

plenty of fresh air to circulate around the sensor.

Important Placement Guidelines

•To ensure accurate temperature measurement, place units out of direct

sunlight and away from any heat sources or vents.

•Display and outdoor sensor must be within 330 ft (100 m) of each other.

•To maximize wireless range, place units away from large metallic items, thick

walls, metal surfaces, or other objects that may limit wireless communication.

•To prevent wireless interference, place both units at least 3 ft (90 cm) away

from electronic devices (TV, computer, microwave, radio, etc.).

(330 feet maximum)

3feet

(.9m)

LEAST

APART

(100 meters)

Setup is Complete

The sensor will now synchronize with the display. It may take a few minutes for

synchronization to complete. Please refer to the troubleshooting section of this

manual if anything appears to be functioning improperly.

OPERATION

Using the Weather Station

Learning Mode

Self-calibrating forecasting uses a unique algorithm to analyze changes in

pressure over a time period (called Learning Mode) to determine your altitude.

After 14 days, the Learning Mode icon disappears from the display screen. At

this point, the self-calibrated pressure is tuned in to your location and the unit is

ready for superior weather prediction.

Weather Forecast

AcuRite’s patented self-calibrating forecasting provides your personal forecast

of weather conditions for the next 12 to 24 hours by collecting data from the

sensor in your backyard. It generates a forecast with pinpoint accuracy -

personalized for your exact location.

STORMY

& WINDY

(flashing=stormy)

SNOW

LIKELY

SNOW / RAIN

MIX LIKELY

RAIN

LIKELY

CLOUDY

View the complete list of icons at www.AcuRite.com/acurite-icons

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This

weather station displays the current pressure with an indicator to show

the direction the pressure is trending (FALLING or RISING).

High & Low Records

High and low records reect the minimum and maximum temperature and

humidity recorded since the unit was powered on, since the batteries were

replaced, or since the records were manually reset (whichever was most

recent).

To view the LOW records, press and release the “ ” button. The low record

indicator appears on the display next to the low records.

To view the HIGH records, press and release the “ ” button. The high record

indicator appears on the display next to the high records.

To reset the LOW records, press AND HOLD the “ ” button while viewing the

low records. Dashes will display to conrm all low records have been reset.

To reset the HIGH records, press AND HOLD the “ ” button while viewing the

high records. Dashes will display to conrm all high records have been reset.

T,111

Troubleshooting

Problem Possible Solution

No outdoor sensor

reception

If the wireless signal indicator shows no bars:

• Relocate the display and/or the outdoor sensor.

The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)

away from electronics that may interfere with the wireless

communication (such as TVs, microwaves, computers, etc.).

no bars • Use standard alkaline batteries (or lithium batteries in

sensor when temperature is below -4ºF/-20ºC). Do not

use heavy-duty or rechargeable batteries. NOTE: It may

take a few minutes for display and sensor to synchronize

after batteries are replaced.

Outdoor

temperature

is ashing or

showing dashes

Flashing of the outdoor temperature is generally an

indication of wireless interference.

1. Bring both the sensor and display indoors and remove

batteries/power adapter from each.

2. Make sure the A-B-C switches on both units match.

3. Reinstall batteries in the outdoor sensor.

4. Reinstall batteries/power adapter in the display.

5. Let the units sit within a couple feet of each other

for a few minutes to gain a strong connection.

Inaccurate forecast

• Weather Forecast icon predicts conditions for the next

12 to 24 hours, not current conditions.

• Has the Learning Mode icon disappeared from the

display? Learning Mode must complete before forecast

and pressure will be accurate.

• Allow unit to run continuously for 33 days. Battery

removal or resetting the display will restart Learning

Mode. After 14 days, forecast should be fairly accurate,

however, Learning Mode calibrates for a total of 33 days.

Inaccurate

temperature

or humidity

• Make sure both the display and sensor are placed out of

direct sunlight and away from any heat sources or vents

(see page 8).

• Make sure both units are positioned away from moisture

sources (see page 8).

Display screen

not working

• Check that the power adapter is plugged into the display

and an electrical outlet.

• Reset the display by pressing the reset button, located

on the back of the display. Date and time will need to be

entered after a reset.

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or email

support@chaney-inst.com for assistance.

Inhaltsverzeichnis

Andere ACU-RITE Wetterstation Handbücher

ACU-RITE

ACU-RITE 00609SBDIA1 Bedienungsanleitung

ACU-RITE

ACU-RITE 06014 Bedienungsanleitung

ACU-RITE

ACU-RITE 1036 Bedienungsanleitung

ACU-RITE

ACU-RITE 00786 Bedienungsanleitung

ACU-RITE

ACU-RITE 825 Bedienungsanleitung

ACU-RITE

ACU-RITE 02036WB Bedienungsanleitung

ACU-RITE

ACU-RITE 02099 Bedienungsanleitung

ACU-RITE

ACU-RITE 00639W Bedienungsanleitung

ACU-RITE

ACU-RITE 01515 Bedienungsanleitung

ACU-RITE

ACU-RITE 02001 Bedienungsanleitung

ACU-RITE

ACU-RITE 2007 Bedienungsanleitung

ACU-RITE

ACU-RITE 02007/06035RM Bedienungsanleitung

ACU-RITE

ACU-RITE 01021 Bedienungsanleitung

ACU-RITE

ACU-RITE 1015 Bedienungsanleitung

ACU-RITE

ACU-RITE 2010 Bedienungsanleitung

ACU-RITE

ACU-RITE Iris Bedienungsanleitung

ACU-RITE

ACU-RITE 00837W Bedienungsanleitung

ACU-RITE

ACU-RITE 02005TBDI Bedienungsanleitung

ACU-RITE

ACU-RITE 00639W Bedienungsanleitung

ACU-RITE

ACU-RITE 2030 Bedienungsanleitung

ACU-RITE

ACU-RITE 01536CAUDI Bedienungsanleitung

ACU-RITE

ACU-RITE 00594W Bedienungsanleitung

ACU-RITE

ACU-RITE 02001 Bedienungsanleitung

ACU-RITE

ACU-RITE 02038W Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Renkforce

Renkforce 1208067 Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung