ACU-RITE 02081 Bedienungsanleitung

Instruction Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor..... 2

Features & Benets: Display.... 3

Setup .................................... 5

Sensor Setup ......................... 5

Display Setup ........................ 6

Atomic Clock ......................... 7

Set the Time & Date ............... 7

Measurement Units ................ 7

Placement Guidelines ............. 8

Using the Forecaster............... 9

Troubleshooting ..................... 9

Care & Maintenance.............10

Specications........................10

FCC Information ...................11

Customer Support .................11

Warranty..............................12

Weather Forecaster

model 02081

Congratulations on your new AcuRite product. To ensure the best

possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this

product. Locate the tab and peel off to remove.

Package Contents

1. Display

2. Outdoor Sensor

3. Power Adapter

4. Instruction Manual

Features & Benets

OUTDOOR SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being sent to the

display.

3. Battery Compartment

4. A-B-C Switch

ID code that must match display’s A-B-C

switch to ensure units synchronize.

5. Battery Compartment Cover

PRODUCT REGISTRATION

www.AcuRite.com

IMPORTANT PRODUCT MUST BE REGISTERED

TO RECEIVE WARRANTY SERVICE

Features & Benets

DISPLAY

1. Learning Mode Icon

Disappears after weather forecast

self-calibration is complete.

2. 12 to 24 Hour Weather Forecast

Self-Calibrating Forecasting pulls data

from the outdoor sensor to generate your

personal forecast.

3. Atomic Clock Signal Strength

4. Atomic Clock

Maintains time with split-second

accuracy and automatically updates

for daylight saving time.

5. Selected Time Zone

6. Daylight Saving Time Indicator

7. Display Low Battery Indicator

8. Current Indoor Temperature

9. Indoor Low Temperature Record

Lowest temperature recorded since

midnight.

10. Indoor High Temperature Record

Highest temperature recorded since

midnight.

11. Day of the Week

12. Date

13. Outdoor Low Temperature Record

Lowest temperature recorded since

midnight.

14. Outdoor High Temperature Record

Highest temperature recorded since

midnight.

15. Outdoor Sensor Signal Strength

16. Current Outdoor Temperature

17. Sensor Low Battery Indicator

4 5 6 7

17 16 15

BACK OF DISPLAY

1. Integrated Hang Hole

For easy wall mounting.

2. SET Button

For setup preferences.

3. + Button

For setup and backlight preferences.

4. Button

For setup and backlight preferences.

5. oF/oC Button

Press to select temperature units.

6. SIGNAL Button

Press to manually search for atomic

signal.

7. Plug-in for Power Adapter

8. A-B-C Switch

ID code that must match sensor’s ABC

switch to ensure units synchronize.

9. Fold-out Tabletop Stand

10. Battery Compartment

11. Battery Compartment Cover

910

SETUP

Set the A-B-C Switch

The A-B-C switch is located inside

the battery compartment. It can

be set to A, B or C. However,

you must select the same letter

choices for both the sensor and

the display in order for the units

to synchronize.

Install or Replace Batteries

AcuRite recommends high quality

alkaline or lithium batteries for

the best product performance.

Heavy duty or rechargeable

batteries are not recommended.

The sensor requires lithium

batteries in low temperature

conditions. Cold temperatures

can cause alkaline batteries

to function improperly. Use

lithium batteries in the sensor for

temperatures below -4ºF / -20ºC.

1. Slide off the battery

compartment cover. Take

note of the A-B-C switch

setting inside the battery

compartment.

2. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Sensor Setup

1A-B-C Switch

set to match

display

2Install Batteries

2 AA batteries

A B C

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of

used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries

in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT

recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Display Setup

Set the A-B-C Switch

Locate the A-B-C switch inside

the battery compartment. Set

the A-B-C switch to A, B or C.

You must select the same letter

choices for both the display and

the sensor in order for the units

to synchronize.

Install or Replace Batteries

(optional)

1. Remove the battery

compartment cover.

2. Insert 3 x AA alkaline

batteries into the battery

compartment, as shown.

Follow the polarity

(+/-) diagram in the

battery compartment.

3. Replace the battery cover.

Plug in Power Adapter

For the best performance, plug

in the power adapter as the main

power source for this product.

2Install Backup

Batteries

(optional)

3 AA batteries

A B C

1A-B-C Switch

set to match

sensor

3Plug in

Power

Adapter

IMPORTANT: Batteries are

a backup power source to

preserve records in the event

of a power outage. Power

adapter is recommended as

the primary power source to

enjoy the full functionality of

this product.

Atomic Clock

AcuRite atomic clocks use a radio-controlled signal (RCC) to synchronize to the

correct time broadcast by the National Institute of Standards and Technology

(NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB

broadcasts the current time and date with split-second accuracy.

The atomic clock and calendar will maintain the correct time and date, and

automatically update for daylight saving time to provide the most accurate

timekeeping standard possible.

Please note: Signal reception is normally better at night and when the weather

is clear. The atomic signal generally takes a few hours to synchronize, so it is

important to manually set the time and date after powering on the display.

Set the Time & Date

The display will automatically enter SET MODE after the unit has powered on.

Enter SET MODE at any time by pressing the “SET” button, located on the back

of the display. Once in SET MODE, the preference you are currently setting

will blink on the display.

To adjust the currently selected (ashing) item, press and release the “+” or

“–“ buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button again to adjust

the next preference. The preference set order is as follows:

TIME ZONE ( PST MST CST EST AST HAST AKST)

DST (Daylight Saving Time ON or OFF)*

CLOCK HOUR

CLOCK MINUTE

CALENDAR MONTH

CALENDAR DATE

CALENDAR YEAR

You will automatically exit SET MODE if no buttons are pressed for 30 seconds.

Enter SET MODE at any time by pressing the “SET” button.

* If you live in an area that observes Daylight Saving Time, DST should be set

to ON, even if it is not currently Daylight Saving Time.

Select Degrees Fahrenheit or Celsius

To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units,

press the “ºF/ºC” button located on the back of the display.

Display Backlight Settings

This weather station’s color display features three different lighting settings:

High (100%) brightness, Medium (60%) brightness and Low (15%) brightness.

When the display is powered with the power adapter (recommended), the

backlight remains on at 100% brightness by default. Adjust the backlight

brightness by pressing and releasing the “+” or “_” buttons.

Using battery power alone, the backlight is available momentarily for 10

seconds by pressing and releasing the “+” or “_” buttons.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of both the display and outdoor sensor are critical to the accuracy and

performance of this product.

Display Placement

Place the display in a dry area free of dirt and dust. Display stands

upright for tabletop use or is wall-mountable.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions. Sensor

is water resistant and is designed for general outdoor use, however,

to extend its life place the sensor in an area protected from direct

weather elements.

Hang the sensor using the integrated hang holes or hanger, or by

using string (not included) to hang it from a suitable location, like a

well covered tree branch. The best location is 4 to 8 feet above the

ground with permanent shade and plenty of fresh air to circulate

around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct

sunlight and away from any heat sources or vents.

• Display and outdoor sensor must be within 330 ft (100 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away

from electronic devices (TV, computer, microwave, radio, etc.).

Setup is Complete

The sensor will now synchronize with the display. It may take a few minutes for

synchronization to complete. Please refer to the troubleshooting section of this

manual if anything appears to be functioning improperly.

TV 3

(100 meters)

(330 feet maximum)

(.9 m)

LEAST

APART

Using the Weather Forecaster

Learning Mode

Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over

a time period (called Learning Mode) to determine your altitude. After 14 days, the

Learning Mode icon disappears from the display screen. At this point, the self-calibrated

pressure is tuned in to your location and the unit is ready for superior weather prediction.

Weather Forecast

AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of

weather conditions for the next 12 to 24 hours by collecting data from the sensor in

your backyard. It generates a forecast with pinpoint accuracy - personalized for your

exact location.

Troubleshooting

No outdoor sensor

reception

no bars

If the wireless signal indicator shows no bars:

• Relocate the display and/or the outdoor sensor. The units

must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)

away from electronics that may interfere with the wireless

communication (such as TVs, microwaves, computers, etc).

• Use standard alkaline batteries (or lithium batteries in sensor

when temperature is below -4ºF/-20ºC). Do not use heavy

duty or rechargeable batteries. NOTE: It may take a few

minutes for display and sensor to synchronize after batteries

are replaced.

OPERATION

RAIN

LIKELY

SNOW

LIKELY

RAIN/SNOW

MIX LIKELY

MOSTLY

CLOUDY

View the complete list of icons at www.AcuRite.com/acurite-icons

Display screen

not working

• Check that the power adapter is plugged into the display

and an electrical outlet.

Outdoor

temperature

is ashing or

showing dashes

Flashing of the outdoor temperature is generally an indication

of wireless interference.

1. Bring both the sensor and display indoors and remove at

least one battery from each.

2. Make sure the A-B-C switch on both units match.

3. Reinstall the battery in the outdoor sensor.

4. Reinstall the battery in the display.

5. Let the units sit within a couple feet of each other for about

a few to gain a strong connection.

If your AcuRite product does not operate properly after trying the

troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

Inaccurate forecast

• Weather Forecast icon predicts conditions for the next

12 to 24 hours, not current conditions.

• Has Learning Mode icon disappeared from the

display? Learning Mode must complete before

forecast and pressure will be accurate.

• Allow unit to run continuously for 33 days. Battery

removal or resetting the display will restart Learning

Mode. After 14 days, forecast should be fairly

accurate, however Learning Mode calibrates for a

total of 33 days.

Inaccurate

temperature

• Make sure both the display and sensor are placed out

of direct sunlight and away from any heat sources or

vents (see page 8).

Atomic signal or time

syncing problems

• Press the SIGNAL button on the back of the display to

manually search for the atomic clock signal.

For additional troubleshooting, please visit:

http://www.nist.gov/pml/div688/grp40/radioclocks.cfm

Care & Maintenance

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away

from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Specications

TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC

Indoor: 32ºF to 122ºF; 0ºC to 50ºC

WIRELESS RANGE 330 ft / 100 m depending on home construction materials

OPERATING FREQUENCY 433 MHz

POWER Display: 5v power adapter

3 x AA alkaline batteries (optional)

Sensor: 2 x AA alkaline or lithium batteries

DATA REPORTING Outdoor Data: 16 second updates

Indoor Data: 60 second updates

Andere Handbücher für 02081

Inhaltsverzeichnis

Andere ACU-RITE Wetterstation Handbücher

ACU-RITE

ACU-RITE Air 01412M Bedienungsanleitung

ACU-RITE

ACU-RITE 00828BPDI Bedienungsanleitung

ACU-RITE

ACU-RITE 00806SBDI Bedienungsanleitung

ACU-RITE

ACU-RITE 4409999 Bedienungsanleitung

ACU-RITE

ACU-RITE 00634 Bedienungsanleitung

ACU-RITE

ACU-RITE 02045W Bedienungsanleitung

ACU-RITE

ACU-RITE 02027 Bedienungsanleitung

ACU-RITE

ACU-RITE 00786 Bedienungsanleitung

ACU-RITE

ACU-RITE 00594W Bedienungsanleitung

ACU-RITE

ACU-RITE 518346 Bedienungsanleitung

ACU-RITE

ACU-RITE 01604 Bedienungsanleitung

ACU-RITE

ACU-RITE 11132-1500RX Bedienungsanleitung

ACU-RITE

ACU-RITE 01536CAUDI Bedienungsanleitung

ACU-RITE

ACU-RITE 6027 Bedienungsanleitung

ACU-RITE

ACU-RITE 00251W Bedienungsanleitung

ACU-RITE

ACU-RITE 01120M Bedienungsanleitung

ACU-RITE

ACU-RITE 01010 Bedienungsanleitung

ACU-RITE

ACU-RITE 02098 Bedienungsanleitung

ACU-RITE

ACU-RITE 00899 Bedienungsanleitung

ACU-RITE

ACU-RITE 01193M Bedienungsanleitung

ACU-RITE

ACU-RITE 02050CCDI Bedienungsanleitung

ACU-RITE

ACU-RITE 01518 Bedienungsanleitung

ACU-RITE

ACU-RITE 00832 Bedienungsanleitung

ACU-RITE

ACU-RITE 2007 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung