AddBike Carry'Box Module Handbuch

Non-contractual photos

User and Installation Guide

Carry’Box Module

April 2021

Applicable to the AddBike and the AddBike+

This document indicates the correct practices to be respected during the use and

assembly/disassembly of the Carry’Box module. It is imperative to read this document in its

entirety in order to keep your bike, your AddBike, and your Carry’Box in good working condition

for as long as possible.

Please keep this document.

The AddBike is an innovative solution that transforms your bike into a practical, easy to

handle cargo bike. It consists of a two-wheeled base that allows the transportation of loads

and the installation of modules specifically designed for the AddBike. These modules give

your bike the capacity to carry bulkier loads, groceries or a child.

Welcome to the family of AddBikers!

There is no need to invest in expensive and large cargo bicycles. With the AddBike you can

quickly and easily turn your own bike into a compact cargo bike.

This document concerns only the Carry’Box module and is complementary to the “AddBike

User's and Installation Guide”.

This module is compatible with the AddBike and the AddBike+.

Maximum capacity

Carry’Box

35 kg

Dimensions (LxWxH in cm)

Carry’Box volume

40*45*62 –110 L

Size of the AddBike + Carry’Box

68*70*90

Table of Contents

1. General Warning..................................................................................................................................... 4

2. Lexicon of the Carry’Box module..................................................................................................... 5

3. Contents of the Carry’Box parcel..................................................................................................... 6

4. Installing the Carry’Box ........................................................................................................................ 6

5. Using the Carry’Box .............................................................................................................................16

6. Uninstalling the Carry’Box Module ...............................................................................................16

7. Cleaning....................................................................................................................................................16

8. Warranty...................................................................................................................................................17

9. Assistance in case of problems.......................................................................................................17

1. General Warning

Symbols and warnings:

WARNING!

This symbol indicates a hazard that could result in serious injury if the

instructions are not followed.

CAUTION!

This symbol indicates a hazard that may result in minor injury if the instructions

are not followed.

ADVICE!

This symbol indicates advice for the use or maintenance of your AddBike.

Before installing this module on your AddBike, make sure you have read and understood the

“AddBike User and Installation Guide”.

Read and follow the instructions in this guide: Read the entire guide carefully and follow the

instructions in order to use the Carry’Box module safely. If you do not understand certain indications,

please contact your AddBike dealer or contact AddBike directly at: support@addbike.fr. Please keep

this manual for future reference. It is also important to take into account the directions for use of the

AddBike and that of the bike on which you are installing the AddBike.

The AddBike Company disclaims all liability in case of non-compliance with the instructions in this

User's and Installation Guide of the Module Carry’Box and in case of modification of the product by

the user.

Using the Carry’Box Module

The Carry’Box module is designed to be used on the AddBike produced by our company. Do not try

to install or use this module on other cargo bikes or on a classic bike.

The Carry’Box module is not designed to be stored outdoors for prolonged periods. It must be stored

in a dry and temperate place away from corrosive products.

2. Lexicon of the Carry’Box module

Figure 1 - Lexicon of the Carry'Box module

Crossbar

Front tubes

Compact slat

Upper tubes

Front tubes

Compact slat

Upper

tubes

Crossbar

3. Contents of the Carry’Box parcel

The Carry’Box is delivered in a parcel containing:

•A compact slat;

•The textile part of the module (black & white container);

•The textile lid of the module (black);

•2 upper tubes;

•2 front tubes;

•1 crossbar;

•2 screws BHC M5x30;

•4 screws BHC M5x20;

•The manual for the Carry'Box module.

Before assembling the Carry'Box module on your bike, remember to check that the product is in

good general condition (no scratches, no bent parts).

4. Installing the Carry’Box

The Carry’Box module must be installed and uninstalled as explained. Improper

installation can lead to accidents that could cause serious injury.

We advise you to add the Carry’Box module to your AddBike only when the

latter is properly installed on your bike so as to make this module easier to

assemble.

For the installation you will need an Allen wrench size 3:

Allen wrench (size 3)

Figure 2 - Tool needed

•Screw the provided compact slat to the lower front tubes with the 4 screws BHC M5x20.

You should end up with the result shown in figure 3;

Figure 3 –Fixing the compact slat to the lower tubes

•Remove the screws on both sides of the compact plate of the AddBike seat. The same

applies to the screws on both sides of the highest compact plate of the AddBike backrest;

Figure 4 –Screws to be removed from the seat and backrest

Vis à retirer

Screws to be

removed

Screws to be

removed

•Insert the front tubes into the holes of the seat and line up the screw holes of both parts;

Figure 5 - Insertion of front tubes into the seat

•Replace the previously removed seat screws by inserting them through the holes in the

front tubes;

Figure 6 –Screws to be put back on the seat

•Install the textile:

oSlide on the white textile sheaths

oPosition the rear of the textile in front of the backrest

Figure 7 - Insertion of the textile

•At the back of the module, hook the 3 textile straps around the backrest of the AddBike, starting

with the bottom one;

Tighten the fabric on both sides, centering the fabric on the backrest as much

as possible.

Verify that no cables from the AddBike are caught in the strap clamps.

Figure 8 –Tightening of the lower strap of the textile

Figure 9 –Tightening of the textile

Top straps

tightened

Andere Handbücher für Carry'Box Module

Inhaltsverzeichnis

Andere AddBike Fahrradzubehör Handbücher

AddBike

AddBike AddBike+ Bedienungsanleitung

AddBike

AddBike Carry'Dog Bedienungsanleitung

AddBike

AddBike U-Cargo Bedienungsanleitung

AddBike

AddBike Carry'Box Kid Bedienungsanleitung

AddBike

AddBike Carry'Box Kid Bedienungsanleitung

AddBike

AddBike AddBike+ Handbuch

AddBike

AddBike AddBike+ Bedienungsanleitung

AddBike

AddBike AddBike+ Merkblatt

AddBike

AddBike AddBike+ Bedienungsanleitung

AddBike

AddBike Carry'Box Module Handbuch

AddBike

AddBike Carry'Box Kid Handbuch

AddBike

AddBike Carry'Box Module Bedienungsanleitung

AddBike

AddBike V4.1 Handbuch

AddBike

AddBike Carry 'Box Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung