ADE MISTER POCKET Bedienungsanleitung

ADE Vertriebs GmbH 1

User manual

ADE Vertriebs GmbH 2

Contents:

1. Description

2. Technical data

2.1 Power supply

2.2 Cable connection

2.3 Display

3. Base operation

4. Use

4.1 Optical sensor

4.1.1 Address programming

4.1.2 Bus initialisation

4.1.3 Display sensors

4.1.4 Read our address

4.1.5 Copy address

4.1.6 Display a sensor

4.2 Mechanical switch

4.3 LED button

4.4 CB-EXTIN

4.5 Controller

4.6 Vista Plus

5. Accessories and spare parts

6. Dimensional deviations

ADE Vertriebs GmbH 3

1. Description

Our Mister Pocket is the start-up & configuration device for our

sensors and in-/output devices in the e-kanban system.

Depending on the device connected, corresponding parameters

an be configured without PC with the Mister Pocket. It is operated

with a replaceable, rechargeable battery and has enough capacity

to operate for many hours.

The built-in 4 cm loudspeaker guarantees loud acoustic

notification. An optionally built-in 2D barcode reader rounds off

the input options.

Mister Pocket can also be used to start operation of finished

sensor installations, or, if necessary, to check functions or look for

errors in the system.

This device is part of the basic equipment of our e-kanban system.

A charging station and four-battery charging device are optionally

available.

ADE Vertriebs GmbH 4

2. Technical data

2.1 Power supply

- 4,8V NiMH rechargeable battery with 1000 mAh

2.2 Cable connection

- USB cable with RJ connector

2.3 Display

- 128x64 pixel LCD with beck-lighting

ADE Vertriebs GmbH 5

3. Basic operation

Mister Pocket on-/off switch

This is on the bottom of the device (sliding switch) At position "1"

Mr Pocket is switched on and at position "0" it is switched off.

Navigation

You can use the arrow keys and to navigate through the

menus.

The key (at the very top on the right) or Enter can be used

to select a menu point. Use Clear to leave it again.

Contrast and volume

If you are in the menu "Select device", you can use the key F to

activate the setting menu for contrast and volume. A small box in

the lower right corner of the display informs you of this visually.

You can use the arrow keys and to change the volume

and andthe contrast.

By tapping the Fkey again, the setting menu is deactivated.

ADE Vertriebs GmbH 6

4. Use

ADE Vertriebs GmbH 7

4.1 Optical sensor

You can access the following

functions for the optical sensor

from this menu.

4.1.1 Address programming

Every sensor must have a clear long

address to ensure they can be

differentiated in the bus system.

This requires programming.

In this menu, you are called on to

enter an address. The address is

always six figure e.g. "02 03 05" These are always groups of two

with an initial zero. For example, you can enter "020305“ or

"235". The missing zeros are then added automatically.

If you made a mistake, you can simply repeat the process.

ADE Vertriebs GmbH 8

4.1.2 Initialise bus

If you want to display all sensors

connected to the bus with Mister

Pocket (4.1.3), initialisation must

first take place. The device then

determines which and how many

devices are present.

4.1.3 Display sensors

Before you can display the sensors

in the bus, the bus has to be

initialised (4.1.2).

Here, Mister Pocket displays all

initialised sensors with a serial

number, address and status. Since

the device only has an eight-line

display, you can use the arrow keys and to scroll through

the list of sensors.

The sensor which last reported a changed status is always

focused on and highlighted in grey.

The following table indicates the status.

ADE Vertriebs GmbH 9

Status

Meaning

The sensor is occupied

The sensor is not occupied

The sensor has an inconsistent status

The sensor does not respond

4.1.4 Read out address

This function copies the address of

the connected sensors to the

memory of Mr Pocket.

Only relevant for the function "Copy

address" (4.1.5).

4.1.5 Copy address

The address read out (4.1.4) is

written to the sensor connected.

ADE Vertriebs GmbH 10

4.1.6 Display a sensor

In order to be able to find a

particular sensor in a shelf system,

you can make the sensor flash with

this function.

After selecting this function,

bus initialisation takes place

automatically. After conclusion of the initialisation, you can enter

the sensor address looked for.

If this sensor is not in the system, Mr Pocket issues an error tone.

If the sensor is present, it flashes regularly and as a result is easy

to recognise.

Inhaltsverzeichnis

Andere ADE Messgerät Handbücher

ADE

ADE WS 1700 Bedienungsanleitung

ADE

ADE MZ10040 Bedienungsanleitung

ADE

ADE MZ10017 Bedienungsanleitung

ADE

ADE MZ10027-1 Bedienungsanleitung

ADE

ADE WS 1908 Bedienungsanleitung

ADE

ADE MZ10012 Bedienungsanleitung

ADE

ADE MicrosenseTM II 5300 Bedienungsanleitung

ADE

ADE CK 2304 Bedienungsanleitung

ADE

ADE Spezial MZ10038 Bedienungsanleitung

ADE

ADE Special Bedienungsanleitung

ADE

ADE WS 1501 Bedienungsanleitung

ADE

ADE WS 2322 Bedienungsanleitung

ADE

ADE MZ10023-3 Bedienungsanleitung

ADE

ADE WS 1907 Bedienungsanleitung

ADE

ADE MZ10042 Bedienungsanleitung

ADE

ADE WS 1500 Bedienungsanleitung

ADE

ADE Spezial MZ10028-01 Bedienungsanleitung

ADE

ADE WS 1908 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung