ADJ Vizi BSW 300 Bedienungsanleitung

2/17

User Instructions

Vizi BSW 300

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

Unpacking: Thank you for purchasing the Vizi BSW 300 by ADJ

Products, LLC®. Every Vizi BSW 300 has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture for

any damage and be sure all equipment necessary to operate the unit

has arrived intact. In the event damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Please do not return this unit to your dealer without

contacting customer support rst.

Introduction: The Vizi BSW 300 is a DMX intelligent, moving head

fixture. The Vizi BSW 300 has 2 DMX channel modes, a 17 channel

mode and 20 channel mode. This fixture has 3 operating modes; Show

mode, Sound Active mode, and DMX controlled. For best results use

fog or special effects smoke to enhance the beams projections.

Customer Support: ADJ Products, LLC® provides a toll free cus-

tomer support line, to provide help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Warning! This may cause severe eye damage. Avoid looking

directly into the light source at all times!

Vizi BSW 300 General Information

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 2 ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 3

Vizi BSW 300

Table of Contents

Unpacking......................................................................3

Introduction....................................................................3

Customer Support......................................................................3

Safety Precautions......................................................................4

Features.........................................................................5

Handling Precautions..................................................................6

Registration......................................................................6

Mounting.........................................................................7-9

CAD Drawing.............................................................................9

Base Layout..............................................................................10

DMX Set-Up.........................................................................11-13

DMX Control..............................................................................14

DMX Traits............................................................................15-22

System Menu.......................................................................23-31

Oset Menu.........................................................................32-35

Error Information.......................................................................35

Dimmer Curve Chart.................................................................36

Photometric Chart.....................................................................37

Gobo Replacement...................................................................38

Fuse Replacement....................................................................39

Cleaning..................................................................39

Trouble Shooting.......................................................................40

Warranty.........................................................................41

Specifications....................................................................42

For Your Own Personal Safety, Please Read and Understand This

Manual Completely Before You Attempt To Install Or Operate

This Unit!

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken.

• Do not attempt to remove or break o the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 40 for cleaning details.

• Heat -This fixture should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Vizi BSW 300 Safety Precautions

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 4 ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 5

• 1 x 300W White LED

• Micro-Stepping Motors for Smooth Color and Gobo Transitions

• DMX-512 Protocol Compatible

• 2 DMX Channel Modes: 17 Channels and 20 Channels

• 3/5-Pin XLR In/Out

• Independent Gobo and Color Wheels

• 2 Seperate Gobo Wheels

6 Static Fixed Gobos + Spot & 3 Variably Sized Beam Aperture’s

7 Rotating Gobos + Spot (6 Colored Glass Gobos & 1 Metal Gobo)

• 2 Seperate Color Wheels

7 Static Colors plus Open (Wheel 1)

7 Static Colors plus Open (Wheel 2)

• 6 Facet Rotating Prism - Linear and Circular

• 5 Dimmer Curves

• Frost Filter

• Strobe Effect

• Motorized Focus

• 1-7 Degree Beam Angle (Beam Mode)

• 8-17 Degree Beam Angle (Spot Mode)

• 18-26 Degree Beam Angle (Wash Mode)

• 540˚ Pan Movement

• 240˚ Tilt Movement

• Pan/Tilt Invert

• Pan/Tilt Speed Adjustment

• Pan/Tilt Locking Mechanism

• Digital Display for Address and Function Setting

Included:

• 1.5M PowerCon Cable

• Omega Clamp

Vizi BSW 300 Features

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 7

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 6

The Vizi BSW 300 is fully operational in three dierent mounting posi-

tions, hanging upside-down from a ceiling, sideways on trussing, or

set on a at level surface. Be sure this xture is kept at least 12m

(40ft) away from any ammable materials (decoration etc.). Always

use and install the supplied safety cable as a safety measure to

prevent accidental damage and/or injury in the event the clamp fails

(see next page). Never use the carrying handles for secondary attach-

ment.

Vizi BSW 300 Mounting

When installing the unit, the trussing or area of installation must be

able to hold 10 times the weight without any deformation. When

installing the unit must be secured with a secondary safety attach-

ment, e.g. and appropriate safety cable. Never stand directly below

the unit when mounting, removing, or servicing the unit.

Overhead mounting requires extensive experience, including calculat-

ing working load limits, installation material being used, and perodic

safety inspection of all installation material and unit. If you lack these

qualications, do not attempt the installation yourself.

These installaiton should be checked by a skilled person once a year.

The Vizi BSW 300 carries a two year (730 Day) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) number.

The R.A. number must be clearly written on the outside of the return

package. A brief description of the problem as well as the R.A. num-

ber must also be written down on a piece of paper and included in the

shipping carton. If the unit is under warranty, you must provide a copy

of your proof of purchase invoice. You may obtain a R.A. number by

contacting our customer support team on our toll free customer sup-

port number. All packages returned to the service department not dis-

playing a R.A. number on the outside of the package will be returned

to the shipper at the shippers cost.

Vizi BSW 300 Product Registration

To optimize the performance of this product, please read these operating

instructions carefully to familiarize yourself with the basic operations of

this unit. These instructions contain important safety information regard-

ing the use and maintenance of this unit. Please keep this manual with

the unit, for future reference.

Vizi BSW 300 General Instructions

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures

warranty. In the unlikely event your unit may require service please

contact ADJ®.

During operation the housing may become extremely hot. Avoid touch-

ing the unit with bare hands while in use.

ADJ®will not accept any liability for any resulting damages caused by

the non-observance of this manual or any unauthorized modication

to this unit.

Vizi BSW 300 Handling Precautions

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 8 ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 9

Screw one clamp each via a M12 screw and nut into the

Omega holders. Insert the quick-lock fasteners of the Omega

holder’s into the respective holes on the bottom of the Vizi BSW

300. Tighten the quick-lock fasteners fully clockwise. Install the

second Omega holder. Pull the safety-cable through the open-

ings located on the base plate and over the trussing system or

a safe xation spot. Insert the end in the carabine and tighten

the safety screw.

Vizi BSW 300 Mounting

NOTICE: The suitable enviromental temperature for this light-

ing xture is between -25˚ C to 45˚ C. Do not place this lighting

xture in an enviroment where the temperatures are under or

above the temperatures stated above. This will allow the xture

to run at its best and help prolong the xture life.

Vizi BSW 300 CAD Drawing

478.7mm/18.85”

424.9mm/16.72”

370mm/14.55”

126.6mm/5”

331.7mm/13”

325.5mm/12.80”

376.3mm/14.80”

162.1mm/6.40”

545.1mm/21.50”

221.2mm/8.70”

119.9mm/4.70”

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 10 ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 11

Power Supply: The ADJ® Vizi BSW 300 contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged into

the power source. With this switch there is no need to worry about the

correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models

of dierent manufactures to be linked together and operate from a

single controller, as long as all xtures and the controller are DMX

compliant. To ensure proper DMX data transmission, when using

several DMX fixtures try to use the shortest cable path possible. The

order in which fixtures are connected in a DMX line does not influence

the DMX addressing. For example; a fixture assigned a DMX address

of 1 may be placed anywhere in a DMX line, at the beginning, at the

end, or anywhere in the middle. Therefore, the first fixture controlled

by the controller could be the last fixture in the chain. When a fixture

is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is located

in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): The Vizi BSW 300 can be controlled via DMX-512 proto-

col. The Vizi BSW 300 has 2 DMX channel modes; 17 channel mode,

and 20 channel mode. The DMX address is set electronically using the

controls on the front panel of the unit. Your unit

and your DMX controller require a approved DMX-

512 110 Ohm Data cable for data input and data

output (Figure 1). We recommend Accu-Cable DMX

cables. If you are making your own cables, be sure

to use standard 110-120 Ohm shielded cable (This

cable may be purchased at almost all professional

sound and lighting stores). Your cables should be

made with a male and female XLR connector on

Vizi BSW 300 DMX Set Up

Figure 1

Vizi BSW 300 Base Layout

FrontviewRearview

1. LED:

MASTER On Mastermode

SLAVE On Slavemode

SOUND On Soundactivation

DMX On DMXinputpresent

2. Display:Toshowthevariousmenusandtheselectedfunction.

3. Button:

MENU Toenter/exit the menu,  and move backwards in the menu   

UP  To  moveupinthemenu

DOWN  To movedowninthemenu 

ENTER Toperformthedesiredfunctions

4. DMXinput/output: For DMX512operation,3 /5‐pinXLRplug cable tolinktheunitstogether

5. Fuse(T10A):Protects theunitfromdamageofovercurrent.

6. PowerCable:Toconnect to themainssupply ornextxture.

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 12

either end of the cable. Also remember that DMX cable must be daisy

chained and cannot be split.

Vizi BSW 300 DMX Set Up

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OT

3-PIN XLR

Figure 4

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 13

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin DMX-

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX

xtures may be implemented in a 3-pin DMX line. When inserting stan-

dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Pin 5 - Do Not Use

Pin 4 - Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Vizi BSW 300 DMX Set Up

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 15ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 14

Universal DMX Control: This function allows you to use a univer-

sal DMX-512 controller. A DMX controller allows you to create unique

programs tailored to your individual needs.

1. The Vizi BSW 300 has 2 DMX channel modes; an 17 channel

mode and 20 channel mode. See pages 15-22 for detailed

description of the DMX traits.

2. To control your fixture in DMX mode, follow the set-up procedures

on pages 11-13 as well as the set-up specifications that are

included with your DMX controller.

3. Follow the instructions on page 24 to select your desired DMX

channel mode and DMX address.

4. Use the controller’s faders to control the various DMX fixture traits.

5. For longer cable runs (more than a 100 feet) use a terminator on

the last fixture.

6. For help operating in DMX mode consult the manual included

with your DMX controller.

Vizi BSW 300 DMX Control Vizi BSW 300 17 Channel Mode

Channel Value Function

1 0 - 255 PAN MOVEMENT

2 0 - 255 TILT MOVEMENT

3 COLOR WHEEL 1

0 - 7 WHITE

8 - 15 RED

16 - 23 BLUE

24 - 31 LIGHT GREEN

32 - 39 YELLOW

40 - 47 ORANGE

48 - 55 MAGENTA

56 - 64 LIGHT BLUE

65 - 127 COLOR INDEXING

128 - 189 CLOCKWISE ROTATION FAST - SLOW

190 - 193 STOP

194 - 255 COUNTER-CLOCKWISE ROTATION SLOW - FAST

4 COLOR WHEEL 2

0 - 7 WHITE

8 - 15 PINK

16 - 23 CTO 3200K

24 - 31 UV PURPLE

32 - 39 YELLOW

40 - 47 GREEN

48 - 55 CTO 5600K

56 - 64 CYAN

65 - 127 COLOR INDEXING

128 - 189 CLOCKWISE ROTATION FAST - SLOW

190 - 193 STOP

194 - 255 COUNTER-CLOCKWISE ROTATION SLOW - FAST

5 GOBO WHEEL 1 (GLASS GOBO’S)

0 - 10 OPEN

11 - 21 GOBO 1

22 - 32 GOBO 2

33 - 43 GOBO 3

44 - 54 GOBO 4

55 - 65 GOBO 5

66 - 76 GOBO 6

77 - 87 GOBO 7

88 - 127 GOBO SHAKE GOBOS 1-7

128 - 189 COUNTER-CLOCKWISE ROTATION FAST - SLOW

190 - 193 NO ROTATION

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 17ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 16

Vizi BSW 300 17 Channel Mode

Channel Value Function

11 PRISM ROTATION

0 - 127 INDEXING

128 - 189 CLOCKWISE ROTATION FAST - SLOW

190 - 193 NO ROTATION

194 - 255 COUNTER-CLOCKWISE ROTATION SLOW - FAST

12 FROST

0 - 7 OPEN

8 - 127 APERTURE

128 - 255 WASH

13 FOCUS

0 - 255 NEAR - FAR

14 SHOWS

0 OFF

1 - 21 SHOW 1

22 - 41 SHOW 2

42 - 61 SHOW 3

62 - 81 SHOW 4

82 - 255 SHOW 0

15 DIMMER CURVES

0 - 20 STANDARD

21 - 40 STAGE

41 - 60 TV

61 - 80 ARCHITECTURAL

81 - 100 THEATRE

101 - 255 DEFAULT TO UNIT SETTING

16 PAN/TILT SPEED

0 - 255 FAST - SLOW

17 SPECIAL FUNCTIONS

0 - 69 NO FUNCTION

70 - 79 ENABLE BLACKOUT WITH PAN/TILT MOVEMENT

80 - 89 DISABLE BLACKOUT WITH PAN/TILT MOVEMENT

90 - 99 ENABLE BLACKOUT WITH COLOR CHANGE

100 - 109 DISABLE BLACKOUT WITH COLOR CHANGE

110 - 119 ENABLE BLACKOUT WITH GOBO CHANGE

120 - 129 DISABLE BLACKOUT WITH GOBO CHANGE

130 - 139 PAN/TILT RESET

140 - 149 COLOR WHEEL RESET

150 - 159 GOBO WHEEL RESET

160 - 169 EFFECT RESET (PRISM, FOCUS, & FROST

170 - 199 NO FUNCTION

Vizi BSW 300 17 Channel Mode

Channel Value Function

5 GOBO WHEEL 1 (GLASS GOBO’S)

194 - 255 CLOCKWISE ROTATION SLOW - FAST

6 GOBO WHEEL 1 GOBO ROTATION

0 - 127 INDEXING

128 - 189 CLOCKWISE ROTATION FAST - SLOW

190 - 193 NO ROTATION

194 - 255 COUNTER-CLOCKWISE ROTATION SLOW - FAST

7 GOBO WHEEL 2

0 - 6 OPEN

7 - 13 APERTURE 1

14 - 20 APERTURE 2

21 - 27 APERTURE 3

28 - 34 GOBO 1

35 - 41 GOBO 2

42 - 48 GOBO 3

49 - 55 GOBO 4

56 - 62 GOBO 5

63 - 69 GOBO 6

70 - 83 OPEN

84 - 127 GOBO SHAKE

128 - 189 CLOCKWISE ROTATION FAST - SLOW

190 - 193 NO ROTATION

194 - 255 COUNTER-CLOCKWISE ROTATION SLOW - FAST

8 SHUTTER & STROBE

0 - 7 CLOSED

8 - 15 OPEN

16 - 131 STROBING SLOW - FAST

132 - 139 OPEN

140 - 181 SLOW OPEN - FAST CLOSE

182 - 189 OPEN

190 - 231 SLOW CLOSE - FAST OPEN

232 - 239 OPEN

240 - 247 RANDOM STROBE

248 - 255 OPEN

9 MASTER DIMMER

0 - 255 0% - 100%

10 PRISM (6 FACET)

0 - 7 NO PRISM EFFECT

8 - 127 LINEAR PRISM EFFECT

128 - 255 CIRCULAR PRISM EFFECT

ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 19ADJ Products, LLC - www.adj.com - Vizi BSW 300 Instruction Manual Page 18

Vizi BSW 300 20 Channel Mode

Channel Value Function

1 0 - 255 PAN MOVEMENT

2 0 - 255 PAN FINE

3 0 - 255 TILT MOVEMENT

4 0 - 255 TILT FINE

5 COLOR WHEEL 1

0 - 7 WHITE

8 - 15 RED

16 - 23 BLUE

24 - 31 LIGHT GREEN

32 - 39 YELLOW

40 - 47 ORANGE

48 - 55 MAGENTA

56 - 64 LIGHT BLUE

65 - 127 COLOR INDEXING

128 - 189 CLOCKWISE ROTATION FAST - SLOW

190 - 193 STOP

194 - 255 COUNTER-CLOCKWISE ROTATION SLOW - FAST

6 COLOR WHEEL 2

0 - 7 WHITE

8 - 15 PINK

16 - 23 CTO 3200K

24 - 31 UV PURPLE

32 - 39 YELLOW

40 - 47 GREEN

48 - 55 CTO 5600K

56 - 64 CYAN

65 - 127 COLOR INDEXING

128 - 189 CLOCKWISE ROTATION FAST - SLOW

190 - 193 STOP

194 - 255 COUNTER-CLOCKWISE ROTATION SLOW - FAST

7 GOBO WHEEL 1 (GLASS GOBO’S)

0 - 10 OPEN

11 - 21 GOBO 1

22 - 32 GOBO 2

33 - 43 GOBO 3

44 - 54 GOBO 4

55 - 65 GOBO 5

66 - 76 GOBO 6

77 - 87 GOBO 7

Vizi BSW 300 17 Channel Mode

Channel Value Function

17 SPECIAL FUNCTIONS

200 - 209 RESET ALL MOTORS

210 - 249 NO FUNCTION

250 - 255 SOUND ACTIVE

Gobo 1 Gobo 2 Gobo 3 Gobo 4

Gobo 5 Gobo 6 Gobo 7

Gobo 1

Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6

Aperture 1 Aperture 3Aperture 2

GOBO WHEEL 1

GOBO WHEEL 2

Andere Handbücher für Vizi BSW 300

Inhaltsverzeichnis

Andere ADJ DJ-Equipment Handbücher

ADJ

ADJ Eliminator Lighting FROST FX BAR W Bedienungsanleitung

ADJ

ADJ Focus Spot Three Z Bedienungsanleitung

ADJ

ADJ HYDRO BEAM X1 Bedienungsanleitung

ADJ

ADJ StarTec Series Bedienungsanleitung

ADJ

ADJ WiFly Chameleon Bedienungsanleitung

ADJ

ADJ WOLFMIX WMX1 Bedienungsanleitung

ADJ

ADJ PINSPOT LED QUAD DMX Bedienungsanleitung

ADJ

ADJ VIZI CMY300 Bedienungsanleitung

ADJ

ADJ MEGA HEX PAR Bedienungsanleitung

ADJ

ADJ SCENE SETTER 48 Bedienungsanleitung

ADJ

ADJ Inno Pocket Spot Pearl Bedienungsanleitung

ADJ

ADJ UV Panel HP Bedienungsanleitung

ADJ

ADJ ELEMENT H6 PAK Bedienungsanleitung

ADJ

ADJ ENCORE BURST UV IP Bedienungsanleitung

ADJ

ADJ ADJ FLAT PAR TRI18X Bedienungsanleitung

ADJ

ADJ MEGA HEX PAR Bedienungsanleitung

ADJ

ADJ ENTOUR HAZE PRO Bedienungsanleitung

ADJ

ADJ ECO UV BAR 50 IR Bedienungsanleitung

ADJ

ADJ UV LED BAR20 IR Bedienungsanleitung

ADJ

ADJ 15 HEX BAR IP Bedienungsanleitung

ADJ

ADJ ENCORE FR150Z Bedienungsanleitung

ADJ

ADJ Fusion Tri FX Bar Bedienungsanleitung

ADJ

ADJ ENCORE BURST 100 IP Bedienungsanleitung

ADJ

ADJ POCKET PRO Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung