ADJ WiFly NE1 Bedienungsanleitung

4/15

User Instructions

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

• 432 Channel DMX Controller

• Control Up to 12 Individual Fixtures

• 12 Multi-Function Buttons

• 12 Memories via 2 Banks

• 6 Mode Buttons (Fixture, Color, Gobo, Effect, Show, & Pause)

• Master Blackout Function

• Built-In ADJ’s WiFly TransCeiver Wireless DMX

• USB Slot (8GB USB stick included.)

• Password Protection

• Master Dimmer Fader Control

• Strobe Rate Fader Control

WiFly NE1 Features

WiFly NE1 Product Registration

The WiFly NE1 carries a 1 year (365 days) limited warranty. Please fill

out the enclosed warranty card to validate your purchase and war-

ranty. You may also register your product online at www. americandj.

com. All returned service items whether under warranty or not, must

be freight pre-paid and accompany a return authorization (R.A.) num-

ber. If the unit is under warranty you must provide a copy of your proof

of purchase invoice. Please contact ADJ Products, LLC customer

support for a R.A. number.

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

WiFly NE1 General Instructions

ADJ Products, LLC www.adj.com - WiFly NE1 Page 3

Unpacking: Thank you for purchasing the WiFly NE1 by ADJ Prod-

ucts, LLC. Every WiFly NE1 has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all equipment necessary to operate the unit has

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further

instructions. Please do not return this unit to your dealer without con-

tacting customer support rst.

Introduction: The WiFly NE1 is a 432 channel DMX controller with

ADJ’s WiFly, wireless DMX built-in or hard wired via 3-pin DMX cable.

This controller is designed for RGB, RGBW, RGBA, RGBWA, and

RGBWA + UV LED units. The controller come preloaded with generic

profiles for most of the fixture’s that fall into the category above.

Customer Support: ADJ Products, LLC provides a toll free customer

support line, to provide help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

WiFly NE1 General Information

ADJ Products, LLC www.adj.com - WiFly NE1 Page 2

ADJ Products, LLC www.adj.com - WiFly NE1 Page 4 ADJ Products, LLC www.adj.com - WiFly NE1 Page 5

WiFly NE1 DMX Set Up

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your ADJ WiFly NE1.

Only use the included power supply to power WiFly NE1.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. Therefore, the first fixture controlled by

the controller could be the last fixture in the chain. When a fixture is

assigned a DMX address of 1, the DMX controller knows to send DATA

assigned to address 1 to that unit, no matter where it is located in the

DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): DMX controller and unit require a approved DMX-512 110

Ohm Data cable for data input and data output (Figure 1). We recom-

mend Accu-Cable DMX cables. If you are making your own cables, be

sure to use standard 110-120 Ohm shielded cable

(This cable may be purchased at almost all pro-

fessional sound and lighting stores). Your cables

should be made with a male and female XLR con-

nector on either end of the cable. Also remember

that DMX cable must be daisy chained and cannot

be split.

Figure 1

WiFly NE1 DMX Set Up

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 4

ADJ Products, LLC www.adj.com - WiFly NE1 Page 7

WiFly NE1 Controls and Functions

ADJ Products, LLC www.adj.com - WiFly NE1 Page 6

WiFly NE1 DMX Set Up

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin DMX-

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX

xtures may be implemented in a 3-pin DMX line. When inserting stan-

dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Pin 5 - Do Not Use

Pin 4 - Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

13 12 11 10 9

876542

15 14

ADJ Products, LLC www.adj.com - WiFly NE1 Page 8 ADJ Products, LLC www.adj.com - WiFly NE1 Page 9

WiFly NE1 Controls and Functions - Rear PanelWiFly NE1 Controls and Functions

1. WIFLY ANTENNA - This is used to send WiFly wireless DMX signal to

compatible WiFly products.

2. EFFECT ROTARY KNOBS - These knobs are used to adjust fixture

channels and to adjust effect functions.

3. WIFLY INDICATOR - This LED will illuminate when a WiFly signal

enabled and active.

4. LCD DISPLAY - Displays all current functions and menu data.

5. DIAL/ENTER BUTTON - This dial is used to scroll through menu options

and confirm a selection by pressing it. It is also used to access manual

fixture control mode.

6. STROBE RATE FADER - This fader controls the shutter channel for fix-

tures that include a shutter channel.

7. USB PORT - This USB port is used to upload fixture profiles and

save/upload memory files. Supports most USB drives.

Note: USB stick can be formatted for FAT16 or FAT32.

Note: In order for your controller to recognize your files, they must be

stored in a folder named ADJ-NE1. The folder cannot have any other

name.

8. MASTER DIMMER FADER - This fader controls the master intensity,

typically tied into the dimmer channel of a fixture.

9. BLACKOUT BUTTON - Activates/Deactivates blackout state.

10. STROBE BUTTON - Press this button to activate/deactivate strobing for

selected fixtures.

11. MEMORY 1-6/7-12 BUTTONS - Used to save/playback memories (can

be static or moving scenes).

12. SET-UP BUTTON - This button is used to enter and exit the settings

menu.

13. ESC/PAGE - This button is used to exit the submenu. If you press and

hold this button for at least 3 seconds all output goes to zero. This but-

ton is also used to switch between memory button pages.

14. FUNCTION BUTTONS 1-12 - These buttons are multi-functional

depending on the selected mode.

15. MODE BUTTONS - These buttons are used to change the state of

operation. Note: The PAUSE button will only pause running effects.

1. DMX OUT - Used to send DMX signal to the compatable LED fixtures.

2. DC INPUT - Accepts a DC12V, 500mA minimum, power supply

(Included).

3. POWER SWITCH - Use this switch to power on/off the controller.

1 32

WiFly NE1 WiFly Set Up

Set Wiy Channel

1. Press the SET-UP button for two seconds to enter the main menu.

2. Turn the DIAL/ENTER button to menu option 6 (Set wiy channel).

Press the DIAL/ENTER button to enter.

3. Turn the DIAL/ENTER button to set the channel address (00 – 15),

then press the DIAL/ENTER button to conrm.

4. Press and hold the SET-UP button for 2 seconds to exit menu

mode.

Set Wiy Power

1. Press the SET-UP button for two seconds to enter the main menu.

2. Turn the DIAL/ENTER dial to menu option 7 (Set WiFly Power).

Press the DIAL/ENTER button to enter.

3. Turn the DIAL/ENTER dial to turn the WiFly power ON or OFF, then

press the DIAL/ENTER button to enter.

4. Press and hold the SET-UP button for 2 seconds to exit menu

mode.

WiFly NE1 Operation

delete or select “delete all lib” to delete all proles. Press the

DIAL/ENTER dial to enter.

4. Turn the DIAL/ENTER dial to select “Yes”. Press the DIAL/

ENTER dial to enter. Press the ESC/PAGE button to exit.

Patch Light Lib

1. Press and hold the SET-UP button for two seconds to enter

the main menu.

2. Turn the DIAL/ENTER dial to menu option 3 (Patch Light Lib).

Press the DIAL/ENTER dial to enter.

3. Turn the DIAL/ENTER dial to nd the prole that you wish to

patch. Press the DIAL/ENTER dial to enter.

4. Press the xture button(s), 1-12, that you wish to patch the

selected prole to and turn the DIAL/ENTER dial to set the

starting address. Press the DIAL/ENTER dial to enter. Press the

ESC/PAGE button to exit.

Delete Patch Light

1. Press and hold the SET-UP button for two seconds to enter

the main menu.

2. Turn the DIAL/ENTER dial to menu option 4 (Delete Light

Patch) then select the xture(s), 1-12, that you wish to delete

from the patch. Press the DIAL/ENTER dial to excute.

3. Turn the DIAL/ENTER dial to select “Yes”. Press the DIAL/

ENTER dial to excute.

Edit Light Lib

Note: WiFly NE1 allows for channel defaults to be set for PAN,

TILT, COLOR, and GOBO channels when the prole is being

created. If you wish to edit these defaults or set automatic de-

faults for other channels, this is where you do this.

1. Press the SET-UP button for two seconds to enter the main

ADJ Products, LLC www.adj.com - WiFly NE1 Page 11

WiFly NE1 Operation

LOADING FIXTURE PROFILES

NOTE: The WiFly NE1 comes pre-loaded with Generic xture

proles, which include RGB, RGBW, RGBA, RGBWA, RGB-

WAU, TRI-WHITE, 36CH 8-Bit ML (M1), and 36CH 16-Bit ML

(M2). See the Generic xture traits chart section on page 18 for

channel details. All other proles can be loaded from the USB

stick, which is included. The USB stick includes several ADJ

proles, which are compatible with this controller. Because the

le names are abbreviated, due to character limitations, please

us the “Fixture Prole Details” PDF list to cross reference the

les. So your controller runs at optimum speed, please only

load the proles that you will be using. A maximum of 65 pro-

les can be loaded at a time.

1. With the controllers power switch OFF, insert the included

USB drive into the controllers USB port and power ON the con-

troller.

2. Press and hold down the SET-UP button for two seconds to

enter the main menu.

3. Select menu option 1 (Load Light Lib) by pressing the DIAL/

ENTER dial then turn the DIAL/ENTER dial to nd the prole

that you wish to load.

4. Once you have located the prole, press the DIAL/ENTER

dial to load it. The display will momentarily read “Operation

Complete”. Repeat steps 3 and 4 to load additional proles or

press the ESC/PAGE button to exit.

Delete Light Lib

1. Press and hold the SET-UP button for two seconds to enter

the main menu.

2. Turn the DIAL/ENTER dial to menu option 2 (Delete Light

Lib). Press the DIAL/ENTER dial to enter.

3. Turn the DIAL/ENTER dial to nd the prole that you wish to

ADJ Products, LLC www.adj.com - WiFly NE1 Page 10

ADJ Products, LLC www.adj.com - WiFly NE1 Page 12 ADJ Products, LLC www.adj.com - WiFly NE1 Page 13

menu.

2. Select the xture(s), 1-12, that you wish to edit. Turn the

DIAL/ENTER dial to menu option 5 (Edit Light Lib). Press the

DIAL/ENTER dial to enter. Turn the DIAL/ENTER dial to select

the xture that you wish to edit. Press the DIAL/ENTER dial to

save and conrm.

3. Turn the EFFECT dials, 1-4, to adjust the relevant channel

data. Turn the DIAL/ENTER dial to access additional channels.

Press the DIAL/ENTER dial to save and conrm.

Save Data To USB

Note: This option allows you to store all of your controllers data

to the included USB stick. Up to 12 data les can be stored on

the stick. File names are automatically generated as CONFIG01

- CONFIG12. These le name cannot be changed. If changed,

the controller will not recognize them when you attempt to up-

load it.

1. Press the SET-UP button for two seconds to enter the main

menu.

2. Turn the DIAL/ENTER dial to menu option 8 (Save Data to

USB). Press the DIAL/ENTER dial to enter

3. Using the function buttons 1-12, select the le button that

you wish to save to. If you select button #4, for example, the le

will be stored on the USB stick as “CONFIG04”.

Note: If you have a ashing green FUNCTION button, this

means you already have data stored in that location. So

if you do not want to overwrite it, do not select a ashing

green button.

Load Data From USB

Note: This option can only be used if you already have data

from a WiFly NE1 controller stored on your USB stick. Data les

will appear in your computer as CONFIG01-CONFIG12. These

WiFly NE1 Operation

les cannot be renamed. Otherwise, the controller will not rec-

ognize them.

1. Press and hold the SET-UP button for two seconds to enter

the main menu.

2. Turn the DIAL/ENTER dial to menu option 9 (Load Data from

USB). Press the DIAL/ENTER dial to enter.

3. Usin the FUNCTION buttons 1-12, select the le button that

you wish to upload into your computer.

Note: Green ashing FUNCTION buttons indicate there is

data stored there and are available to be selected. If you

select a non-ashing button, you will get a “Operation Fail-

ure!” error.

Format The USB

Note: This function should be used with caution as all data on

the USB stick will be erased. It is highly recommended that you

back up all USB stick les to your computer before proceeding.

1. With the controllers power switch OFF, insert the USB stick

into the controllers USB port and power on the controller.

2. Press the SET-UP button for two seconds to enter the main

menu.

3. Turn the DIAL/ENTER dial to menu option 10 (Format the

USB disk). Press the DIAL/ENTER dial to enter.

4. Turn the DIAL/ENTER dial to select “YES”. Press the DIAL/

ENTER dial to excute.

Strobe Settings

This setting allows you to choose the manner in which the

STROBE button functions. It allows you to choose between

Latch and Flash. Selecting Latch will make the STROBE button

latch ON/OFF and selecting Flash will make it momentary, last-

WiFly NE1 Operation

2. Turn the DIAL/ENTER dial to menu option 13 (Delete All

Data). Press the DIAL/ENTER dial to enter.

4. Using the FUNCTION 1-12 buttons, input the passcode.

5. Turn the DIAL/ENTER dial to select “Yes”. Press the DIAL/

ENTER dial to execute.

Factory Setting

Note: This function should be used with caution as it will delete

all data, memories, and return all settings, including passcode,

back to factory default. The default passcode to execute this

function is 1668. If your passcode has changed, you will need

to input it to execute this function.

1. Press the SET-UP button for two seconds to enter the main

menu.

2. Turn the DIAL/ENTER dial to menu option 14 (Factory Set-

tings). Press the DIAL/ENTER dial to enter.

4. Using the FUNCTION 1-12 buttons, input the passcode.

5. Turn the DIAL/ENTER dial to select “Yes”. Press the DIAL/

ENTER dial to execute.

Change Passcode

1. Press the SET-UP button for two seconds to enter the main

menu.

2. Turn the DIAL/ENTER dial to menu option 15 (Change Pass-

word). Press the DIAL/ENTER dial to enter.

4. Using the FUNCTION 1-12 buttons, input the current pass-

code.

5. Using the FUNCTION 1-12 buttons, input your new four digit

passcode, then re-input your new passcode a second time to

WiFly NE1 Operation

ADJ Products, LLC www.adj.com - WiFly NE1 Page 15

ing only as long as you press the hold down the button.

1. Press the SET-UP button for two seconds to enter the main

menu.

2. Turn the DIAL/ENTER dial to menu option 11 (Strobe Set-

tings). Press the DIAL/ENTER dial to enter.

3. Turn the DIAL/ENTER dial to select between “Latch” and

Delete Memory

Note: This function should be used with caution as it will de-

lete all memories stored in MEMORY buttons 1-12. The default

passcode to execute this function is 1668. If your passcode has

changed, you will need to input it to execute this function.

1. Press the SET-UP button for two seconds to enter the main

menu.

2. Turn the DIAL/ENTER dial to menu option 12 (Delete Memo-

ry). Press the DIAL/ENTER dial to enter.

3. Turn the DIAL/ENTER dial to select the memory that you wish

to delete. Press the DIAL/ENTER dial to execute.

4. Using the FUNCTION 1-12 buttons, input the passcode.

5. Turn the DIAL/ENTER dial to select “Yes”. Press the DIAL/

ENTER dial to execute.

Delete all data

Note: This function should be used with caution as it will de-

lete all data stored in your controller. Deleted data will include

execute this function is 1668. If your passcode has changed,

you will need to input it to execute this function.

1. Press the SET-UP button for two seconds to enter the main

menu.

WiFly NE1 Operation

ADJ Products, LLC www.adj.com - WiFly NE1 Page 14

Firmware Version

Note:This is a read only menu option that will display the con-

trollers current software version.

1. Press the SET-UP button for two seconds to enter the main

menu.

2. Turn the DIAL/ENTER dial to menu option 16 (Firmware Ver-

sion). Press the DIAL/ENTER dial to enter. Press the ESC/PAGE

button to exit.

Fixture Control, Saving, & Playing Memories

Note: Although the generic proles may work for you, it is rec-

ommended that you load and use the custom proles that were

provided on the USB sitck that was included with your control-

ler. The custom proles may oer you additional control and

features that the generic proles do not include. If you wish to

use the custom proles, please refer to the LOADING FIXTURE

PROFILES section of this user manual and load them before

proceeding. After you have patched your xtures, you can con-

trol and save memories using the following steps.

1. Press the FIXTURE button then select the xtures, using the

FUNCTION 1-12 buttons, that you want to control. If you are

using multiple xtures of the same type and want to control

them at the same time, you can press the rst and last buttons

so all xtures in between are selected at the same time. For ex-

ample, I have patched 6 xtures on buttons 1-6, to select them

all quickly, I would simultaneously press buttons 1 & 6 so all 6

xtures are selected.

2. Press the COLOR button and add a color by using the

FUNCTION 1-12 buttons. Turn the DIAL/ENTER dial to switch

between two pages of preset colors (Note: your xture must

support this feature to function).

3. Press the GOBO button and add a gobo by using the FUNC-

TION 1-12 buttons. Turn the DIAL/ENTER dial to switch be-

ADJ Products, LLC www.adj.com - WiFly NE1 Page 16 ADJ Products, LLC www.adj.com - WiFly NE1 Page 17

WiFly NE1 Operation

tween two pages of preset gobos (Note: your xture must sup-

port this feature to function).

4. Press the EFFECT button and add an eect by using the

FUNCTION 1-12 buttons. Turn the DIAL/ENTER dial to switch

between three pages of eects. In the display, you will see ML

EFFECT (for moving lights) and RGB EFFECT 1 and RGB EF-

FECT 2 (for RGBWA+UV LED’s) plus the speed, phase, size,

and direction settings, which can be controlled from the four

EFFECT rotary dials. You can pause an eect at any time by

pressing the PAUSE button. (Note: your xture must support

this feature to function).

5. Press the SHOW button and enable a show by using the

FUNCTION 1-12 buttons. (Note: your xture must support this

feature to function).

6. You can also set all channel values manually. If you have

already set your scene and want to store it. please see step 7

now. To make manual channel adjustments, press the FIXTURE

button, then press the DIAL/ENTER dial for two seconds, the

display will list channels 1-4 along with their current values.

Use the four EFFECT dials to adjust each channel listed in the

display. Channels are displayed four at a time. To access ad-

ditional channels, turn the DIAL/ENTER dial clockwise and

counter-clockwise.

7. To save your current output, press and hold down any of the

six MEMORY buttons until the display reads “Operation Com-

plete!”. Press that same MEMORY button a second time to

playback from that memory location, it should illuminate solid

green. Repeat steps 1-6 to store additional memories. There

are two memory banks. To access the secondary memory bank

press the ESC/PAGE button. If there is a memory running, that

MEMORY button will ash letting you know that is actively run-

ning in the other bank. If your memory includes an “EFFECT”,

you can pause the eect by pressing the PAUSE button.

WiFly NE1 Operation

ADJ Products, LLC www.adj.com - WiFly NE1 Page 18

8. You can trigger the STROBE button at any time during play-

back. The STROBE button will function relative to the STROBE

RATE fader setting. Adjusting your STROBE RATE fader will

give you DMX control over your xtures shutter or RGBWA+UV

channels. This function cannot be stored into a memory.

9. You can manually adjust the MASTER DIMMER fader at any

time during playback to set the overall intensity for you active

xtures. This function cannot be stored into a memory.

WiFly NE1 Operation

WiFly NE1 Generic Fixture Traits

Profile DMXChannels ChannelInfo

RGB 3 CH1=RED,CH2=GREEN,CH3=BLUE

RGBW 4 CH1=RED,CH2=GREEN,CH3=BLUE,CH4=WHITE

RGBA 4 CH1=RED,CH2=GREEN,CH3=BLUE,CH4=AMBER

RGBWA 5 CH1=RED,CH2=GREEN,CH3=BLUE,CH4=WHITE,CH5=AMBER

RGBWAU 6 CH1=RED,CH2=GREEN,CH3=BLUE,CH4=WHITE,CH5=AMBER,CH6=UV

TRIWHITE 3 CH1=WARMWHITE,CH2=COOLWHITE,CH3=AMBER

36CHML8BIT 36 CH1=PAN,CH2=TILT,CH3=CH3,CH4=CH4,...CH35=CH35,CH36=CH36

36CHML16BIT 36 CH1=PAN,CH2=PANFINE,CH3=TILT,CH4=TILTFINE,CH5=CH5,CH6=CH6,...CH35=CH35,CH36=CH37

WiFly NE1 Fixture Profile Details

NO.

11 Dotz Flood

Generic RGBW LED

RGBW

Generic RGBWA LED RGBWA

Generic RGBA LED RGBA

Generic RGBWAU LED

RGBWAU

ID33-12, ID33-13

Illusion Dotz 4.4

ID44-12, ID44-14

Crazy 8

CRAZ8-1, CRAZ8-9, CRAZ8-12, CRAZ8-15

Inno Color Beam Z19

Inno Pocket Beam

Illusion Dotz 3.3

ADJ-NE1 Fixture Profile List

Inno Beam LED

Inno Spot LED

Generic Tri White LED

WWCWA

Inno Spot LED Wifly

Inno Pocket Roll

IPROLL-6

Inno Pocket Wash

Inno Pocket Scan

Inno Spot Pro Pearl

Inno Spot PRO

Inno Pocket Spot

ICBZ7-14

ICB19-14

IPB-10, IPB-11, IPB13

Item Name

Event Bar

Inno Color Beam LED

Inno Color Beam Quad 7

Event Bar Q4

Inno Color Beam 12

Inno Color Beam Z7

EVBAR-12, EVBAR-14, EVBAR-25

File Names (Numbers at the end of each file

name indicate channel mode)

ICBL-1, ICBL-13

ISLEDW10

Inno Spot Elite

ISPRO-14

ICBQ7-1, ICBQ7-13

Generic 36ch ML 8-bit

Generic 36ch ML 16-bit

36CH-M1

36CH-M2

DFLD-3, DFLD-4, DFLD-6, DFLD-9A, DFLD-9B

Freq Matrix Quad

FMAQD-2, FMAQD-5, FMAQD-18

EBQ4-2, EBQ4-12, EBQ4-14, EBQ4-32, EBQ4-34

Generic RGB LED

RGB

IPS-9, IPS-11

Inno Pocket Spot Pearl

IPSP-9, IPSP-11

Inno Pocket Spot Twins

IPST19, IPST23

Inno Scan HP

ISHP-9, ISHP-12

IPW-9, IPW-11, IPW-19, IPW-21

COB Cannon Wash COBCWS-1, COBCWS-2, COBCWS-3, COBCWS-

4, COBCWS-5, COBCWS-6, COBCWS-7,

Dotz Par-100

DP100-3, DP100-4, DP100-5, DP100-9

INPSCN-6

Inno Roll HP

ISLED-10

ISPPRL14

Flat Par QA12XS

FPQA12-1, FPQA12-2, FPQA12-3, FPQA12-4,

FPQA12-5, FPQA12-6, FPQA12-7, FPQA12-8

Inno Pocket Fusion

IPF-2, IPF-6, IPF-8, IPF-9, IPF-11

IBLED-12, IBLED-14

IRHP-9

ISPEL-15

ICB12-9, ICB12-16

ADJ Products, LLC www.adj.com - WiFly NE1 Page 19

Andere Handbücher für WiFly NE1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADJ DJ-Equipment Handbücher

ADJ

ADJ stinger ii Bedienungsanleitung

ADJ

ADJ MINI DEKKER LZR Bedienungsanleitung

ADJ

ADJ American DJ FUSION FX BAR 1 Bedienungsanleitung

ADJ

ADJ Mega GO Par64 PLUS Bedienungsanleitung

ADJ

ADJ ikon profile ww Bedienungsanleitung

ADJ

ADJ Mega Bar RGBA Bedienungsanleitung

ADJ

ADJ 3D Vision Bedienungsanleitung

ADJ

ADJ 32 HEX PANEL IP Bedienungsanleitung

ADJ

ADJ 7P HEX IP Bedienungsanleitung

ADJ

ADJ ADJ FLAT PAR TRI18X Bedienungsanleitung

ADJ

ADJ 18P HEX IP Bedienungsanleitung

ADJ

ADJ ENCORE LP12Z IP Bedienungsanleitung

ADJ

ADJ 6-PACK SKB CASE Bedienungsanleitung

ADJ

ADJ ENCORE BURST UV IP Bedienungsanleitung

ADJ

ADJ DOTZ MATRIX Bedienungsanleitung

ADJ

ADJ ENCORE PROFILE PRO WW Bedienungsanleitung

ADJ

ADJ SABER SPOT RGBW Bedienungsanleitung

ADJ

ADJ HEX700 Bedienungsanleitung

ADJ

ADJ H20 IR Bedienungsanleitung

ADJ

ADJ Mega GO Bar 50 RGBA Bedienungsanleitung

ADJ

ADJ PinPoint Gobo COLOR Bedienungsanleitung

ADJ

ADJ EVS3 Bedienungsanleitung

ADJ

ADJ Par Z Move RGBW Bedienungsanleitung

ADJ

ADJ ELEMENT H6 FC Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung