ADTRAN 1200080L1 Bedienungsanleitung

FXS+DUALVOICEOPTIONMODULE

PartNumber1200080L1

PartNumber1200080L1#HS

FXS+DUALVOICEPLUG-ONBOARD

PartNumber1200082L1

PartNumber1200082L1#HS

USER MANUAL

61200.080L1-1C

October1995

Tableof Contents

ii FXS+ Dual Voice Option Module 61200.080L1-1

Allrightsreserved.

PrintedinU.S.A.

901 Explorer Boulevard

P.O. Box 070020

Huntsville, AL 35807

Phone: (205) 971-8000

Fax: (205) 971-8699

Trademarks:

MEGACOMis aregistered trademark of AT&T.

Tableof Contents

61200.080L1-1 FXS+ Dual Voice Option Module iii

TableofContents

Chapter 1. Introduction...................................................................................... 1

FXS+ Dual Voice Overview .................................................................................... 1

Functional Description................................................................................... 2

Features .................................................................................................... 2

FXS+ Option Module Specifications ...................................................... 4

Physical Description ....................................................................................... 5

Chapter 2. Installation ........................................................................................ 7

Unpack and Inspect............................................................................................... 7

Shipped byADTRAN ...................................................................................... 7

Provided by Customer .................................................................................... 7

Installing the FXS+ Dual Voice Option Module .................................................. 8

Determine Revision Level of TSU 100 / TSU 600 ....................................... 8

Modules With Hot Replaceable Label on Back Panel .................................. 8

Modules Without Hot Replaceable Label on Back Panel............................ 9

Placement of the Option Module .................................................................. 9

Power Connection ........................................................................................... 9

Wiring ............................................................................................................ 10

Power Up Testing and Initialization ................................................................... 11

Successful Self Test ....................................................................................... 11

Failed Self Test ............................................................................................... 11

OperationAlarms .......................................................................................... 11

Configuration of TX Level (TLP)................................................................. 11

Warranty and Customer Service ........................................................................ 12

Chapter 3. Operation ........................................................................................ 13

Overview ............................................................................................................... 13

Menu Structure ............................................................................................. 13

Menu Operation ............................................................................................ 13

FXS+ Menu Items ................................................................................................. 15

Port Status ...................................................................................................... 15

(2-WSTATUS) 2-Wire Status ......................................................... 16

(VIEW SIG BITS) View Signaling Bits .......................................... 16

Port Configuration (PORT CONFIG) ......................................................... 17

Port Configuration Menu Items and Their Choices ........................... 18

Mode ................................................................................................ 18

RX LVL(TLP) (Receive Level/Transmit Level Point) ................... 19

TX LVL(TLP) (Transmit Level/Transmit Level Point) ................ 19

Fault Resp (Fault Response ) ......................................................... 20

Tandm Options (Tandem Options) .............................................. 20

Tableof Contents

iv FXS+ Dual Voice Option Module 61200.080L1-1

Port Configuration Menu Items/Parameters Summary ...................... 21

PORT UTIL (Port Utility) ................................................................................... 22

Port Test ......................................................................................................... 23

1 kHz Tone ...................................................................................... 23

VIEW SIG BITS (View Signaling Bits) .......................................... 24

SET TX SIGNAL(Set Transmit Signal) ......................................... 24

SET 2-W OUTPUT (Set 2-Wire Output)...................................... 24

TSU Features Used With FXS+ Options ............................................................ 25

Factory Restore .............................................................................................. 25

Run Self Test .................................................................................................. 25

Appendix A. FXS+ Failure Messages .............................................................. 27

Failure MessagesAt Power-Up ............................................................................ 27

FXS+ Alarm Messages .......................................................................................... 27

Appendix B. Signaling States ........................................................................... 29

Signaling States vs. Mode of Operation ............................................................. 29

List of Figures

Figure 1-1 FXS+ Dual Voice Option Module ...................................................... 5

Figure 2-1 Installing Option Module .................................................................. 8

Figure 3-1 TSU 100 Main Menu ........................................................................ 14

Figure 3-2 Port Status Submenus ...................................................................... 15

Figure 3-3 2-Wire Status Display ...................................................................... 16

Figure 3-4 View Signaling Bits Display ............................................................. 16

Figure 3-5 Port Configuration Submenus ......................................................... 17

Figure 3-6 Port Utility Submenus ...................................................................... 22

Figure 3-7 Port Test Submenus .......................................................................... 23

Figure 3-8 View Signaling Bits Display ............................................................. 24

Tables

Table 2-A 2-Wire Voice Pinout Connection...................................................... 10

Table 3-A Port Configuration Parameters.......................................................... 21

Table 3-B Port Test Parameters ........................................................................... 24

Table B-A PLAR Mode......................................................................................... 29

Table B-B Tandem Mode .................................................................................... 30

Table B-C FXS+ Mode (Loop-Start)................................................................... 31

Table B-D FXS+ Mode (Ground Start) .............................................................. 32

Chapter1. Introduction

61200.080L1-1 FXS+ Dual Voice Option Module 1

Chapter1

Introduction

FXS+ DUAL VOICE OVERVIEW

The FXS+ Dual Voice (FXS+) option module is one of

the option modules available for use with theADTRAN

TSU 100/600. The FXS+ module provides two 2-wire

voice-grade interfaces serving as the source of line-

current and ringing voltage to a telephone or station

interface. The FXS+ may serve as the station-side of a

foreign exchange fxs/fxo application.

When used with anADTRAN FXO+, analog message-

waiting functions may be extended over the T-span to an

analog message-waiting telephone. The FXS+ card

provides the necessary voltages to light the message-

waiting light.

The FXS+ may also be paired with another FXS+ to

provide a hot-line or private line automatic ringdown

(PLAR) function to a remote location at the far end of

the T-span. When the FXS+ is used in the Tandem

mode, it can be set to accept phone service directly from

a toll switch (e.g., 1-800 services, Megacom®) using E &

M signaling on the T-span. It may also be used to

provide trunk services to a PBX from a local switch. The

FXS+ is intended for use in applications where the

2-wire port wiring remains on premises. Signaling and

interfaces comply with portions of EIA/TIA-464-A,

T1.401, and AT&T Pub. 41458 and Pub. 43801.

The FXS+ option module also accepts the FXS+ plug-on

board to provide up to four FXS+ functional ports per

option slot used.

Chapter1. Introduction

2FXS+ Dual Voice Option Module 61200.080L1-1

Functional Description

The FXS+ is designed to fit in the option slot of the TSU

100/600 and is subject to its operation and control. The

FXS+ is configured from the front panel of the TSU 100/

600 or by an external personal computer (PC) program.

The internal menus for its configuration are a part of the

FXS+ module and are automatically installed when the

FXS+ is plugged into the unit.

Features

The FXS+ Dual Voice option module has the following

features:

• Each 2-wire port operates at 64 kbps (1 DS0)

• Supports loop resistances to 1200 Ω

• Menu configurable TX and RX levels

• FXS, PLAR, and Tandem operating modes

• Ground Start or Loop Start signaling

• Supports analog message-waiting light when used with

ADTRANFXO+

• Wink or Immediate Supervision in Tandem mode

• Integral ringback and dial tone generation

• Integral 20 Hz ring generator

• Extensive testing capabilities

- Rx and Tx signal bit monitoring

- Busy & Ringing status monitoring

- Integral 1 kHz tone generation sends test tone

towards near or far end

- Manual control of TX Aand B signal bits

- Manual control of 2-wire interface supervision

output

Chapter1. Introduction

61200.080L1-1 FXS+ Dual Voice Option Module 3

• Adding the FXS+ plug-on board provides the TSU

100/600 with four voice ports in one option slot

• Selectable response during carrier failure

• Full V.34 modem connect capability (28.8 kbps) for

#HS model

• Provides FXS forward disconnect capability

• Hot replaceable (#HS model)

Chapter1. Introduction

4FXS+ Dual Voice Option Module 61200.080L1-1

FXS+ Option Module Specifications

The FXS+ Dual Voice option module conforms to the

following specifications:

Voice Channels 2 (4 with plug-on module

installed)

Transmission Levels TX: +3 to -5 dB TLP, 1 dB

steps

RX: 0 to -8 dB TLP, 1 dB steps

Frequency Response 300 - 3400 Hz (±1.0 dB)

2-wire Impedance 600 Ω+ 2.15 µF

2-wire ERL >30 dB

2-wire SRL >20 dB

THL ERL >30 dB

THL SRL >20 dB

Longitudinal Bal >52 dB

RX Idle Channel Noise <15 dBrnc

TX Idle Channel Noise <20 dBrnc

Loop Current 25 mA (constant current)

Loop Range 0 - 1200 Ω

Operating Temperature 0°- 45°C, 95% humidity,

non-condensing

Connector RJ-45

Ring Generator 20 Hz 60 Vrms 2.5 RE

Tests Power-on circuit test

Signal bits monitoring and

setting

1 kHz test tone generation

Setable 2-wire port output state

Chapter1. Introduction

61200.080L1-1 FXS+ Dual Voice Option Module 5

Physical Description

The FXS+isanoption module which plugs into the

option slot in the rear of the TSU 100; see Figure 1-1.

PORT X.3

DUAL FXS

PORT X.1 PORT X.2

Figure 1-1

FXS+ Dual Voice Option Module

The FXS+ rear panel includes a plastic plug over a cutout

for additional connectors. This allows a plug-on board

to be added to the FXS+ module. The PORT X.3

indication is linked to the port numbering philosophy of

the TSU 100 product family. The X represents the slot

number, and the .3 indicates the port number. For

the TSU 100 application, there is only one option slot.

Therefore the port designations for the two FXS voice

ports will be 1.1 and 1.2. If added, the plug-on board

port designation would be 1.3 and 1.4. These port

numbers will appear in the front panel LCD menu

displays.

Chapter1. Introduction

6FXS+ Dual Voice Option Module 61200.080L1-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADTRAN Zubehör Handbücher

ADTRAN

ADTRAN 1200105L2 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung