ADTRAN JobAid+ 1200482G1 Bedienungsanleitung

jobAid

DESCRIPTION

The 2.5 Gbps Multimode SFP plugs into ADTRAN GigE modules

designed to accept SFPs. The SFP provides an optical interface to

the GigE physical interface. Installed into an appropriate host

module, the SFP provides a GigE interface to the supporting

system.

NOTE

To ensure compatibility, refer to the documentation provided

with the host module.

The following features are supported on the SFP:

■Tri-Rate 1.063/2.125/4.25 Gbps, 850 nm, multi-mode, 2 fiber

operation

■Maximum Optical distance: see table below.

Maximum Optical Distance Table

CAUTION

Due to compliance certification requirements, only SFPs supplied

by ADTRAN are to be used with ADTRAN modules. ADTRAN

cannot certify system integrity with other SFPs.

Data Rate OM3 MMF OM2 MMF OM1 MMF

1.062 Gbps 860m 550m 300m

2.125 Gbps 500m 300m 150m

4.25 Gbps 380m 150m 70m

Small Form-factor Pluggable

2.5 GBPS MULTIMODE SFP

Specifications

■Optical Specifications:

♦Optical transmit level: –2.5 dBm to –9.0 dBm

♦Optical receive level:

●1.062 Gbps, –3.0 dBm to –15.0 dBm

●2.125 Gbps, –3.0 dBm to –13.0 dBm

●4.25 Gbps, –3.0 dBm to –12.0 dBm

♦Link power budget: 6.0 dB

♦Optical connectors: LC

INSTALLATION

Before installing the equipment, inspect the SFP. If damage has

occurred during shipping, file a claim with the carrier, and then

contact ADTRAN Customer Support. For more information, refer

to the warranty.

To install the SFP into an appropriate module, complete the

following steps:

NOTE

Do not remove the protective end cap from the SFP until you are

ready to connect the fiber optic cable.

1. Insert the SFP into the SFP cage on the module. Ensuring

that the latch handle on the SFP is facing upward, slide the

SFP all the way into the SFP cage until there is an audible

“click”.

NOTE

The latch on the SFP is for removal only. When removing the SFP,

rotate the latch away from the SFP, the SFP should easily slide out

of the cage.

2. Remove the end cap and connect the fiber to the SFP+.

NOTICE

We recommend that you keep the protective end cap on

whenever the transceiver optical fiber connector is not in use.

3. Continue the installation and turn-up of the host module

using the instructions in the Job Aid provided with the

module or other system-level documentation available

online at www.adtran.com.

Product P/N: 1200482G1

Issue Date: March 2016

Document P/N: 61200482G1-22A

Documentation for ADTRAN Access and Aggregation products is

available for viewing and download directly from the ADTRAN Support

Community website.

Go to: https://supportforums.adtran.com/welcome

Registration is required.

ADTRAN offers training courses on our products, including customized

training and courses taught at our facilities or at customer sites.

For inquiries, go to: http://adtran.com/training

The following related online documents and resources provide additional information for this

product:

SFP/XFP/SFP+ Compatibility Matrix (online tool, go to: http://www.adtran.com/sfp)

SAFETY AND REGULATORY COMPLIANCE

WARNING

Read all warnings and cautions before installing or servicing this

equipment.

CAUTION

■Electrostatic Discharge (ESD) can damage electronic modules.

When handling modules, wear an antistatic discharge wrist

strap to prevent damage to electronic components. Place

modules in antistatic packing material when transporting or

storing. When working on modules, always place them on an

approved antistatic mat that is electrically grounded.

■The ADTRAN system chassis frame ground terminal must be

connected to an earth ground to ensure that the metal

enclosure of the SFP is properly grounded via the backplane

connector.

NOTE

■This product is NRTL Listed to the applicable UL Standards.

■This device complies with Part 15 of the FCC rules. Operation

is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received,

including interference that may cause undesired operation.

■Changes or modifications not expressly approved by

ADTRAN could void the user's authority to operate this

equipment.

■Install this product in a Restricted Access Location. This

product is intended to be installed and serviced by qualified

Service Personnel only.

■This product meets EU RoHS Directive 2011/65/EU and/or

applicable exemptions. Refer to www.adtran.com for further

information on RoHS/WEEE..

Warranty: ADTRAN will replace or repair this product within the warranty period if it does not

meet its published specifications or fails while in service. Warranty information can

be found online at www.adtran.com/warranty.

Trademarks: Brand names and product names included in this document are trademarks,

registered trademarks, or trade names of their respective holders.

CAUTION!

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY

HANDLING PRECAUTIONS REQUIRED

ADTRAN CUSTOMER CARE:

From within the U.S. 1.888.423.8726

From outside the U.S. +1 256.963.8716

PRICING AND AVAILABILITY 1.800.827.0807

*61200482G1-22A*

Andere ADTRAN Netzwerk-Hardware Handbücher

ADTRAN

ADTRAN TSU LT Bedienungsanleitung

ADTRAN

ADTRAN IQ Probe 1200214L1 Bedienungsanleitung

ADTRAN

ADTRAN U-BR1TE Bedienungsanleitung

ADTRAN

ADTRAN HTU Nx64 Bedienungsanleitung

ADTRAN

ADTRAN Dial Backup Interface Module 1204006L2 Bedienungsanleitung

ADTRAN

ADTRAN 1202801L1 Bedienungsanleitung

ADTRAN

ADTRAN SLC-5 U-BR1TE III Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1335 Series Bedienungsanleitung

ADTRAN

ADTRAN NT1 ACE Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1224 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta T1/FT1 + DSX-1 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1760-12F Bedienungsanleitung

ADTRAN

ADTRAN Total Access 324E Bedienungsanleitung

ADTRAN

ADTRAN Express 3000 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta Series Bedienungsanleitung

ADTRAN

ADTRAN FNID Handbuch

ADTRAN

ADTRAN DS3 MX Bedienungsanleitung

ADTRAN

ADTRAN 1442120G1 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 362R Bedienungsanleitung

ADTRAN

ADTRAN TSU LT Bedienungsanleitung

ADTRAN

ADTRAN NetVanta Serial Dial Backup Interface Module (DIM)... Bedienungsanleitung

ADTRAN

ADTRAN MX2800 STS-1 Benutzerhandbuch

ADTRAN

ADTRAN T200 HTU-R Bedienungsanleitung

ADTRAN

ADTRAN 1200864L1 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung

ADTRAN jobAid+ 1200482G1 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken